UQAM logo
Page d'accueil de l'UQAM Étudier à l'UQAM Bottin du personnel Carte du campus Bibliothèques Pour nous joindre

Service des bibliothèques

Veille bibliographique sur les inondations
UQAM logo
Veille bibliographique sur les inondations
  • Bibliography
  1. Vitrine des bibliographies
  2. Veille bibliographique sur les inondations
  3. Résultats
Veille bibliographique sur les inondationsVeille bibliographique sur les inondations
  • Bibliography

Votre recherche

Réinitialiser la recherche

Aide

L’interface de recherche est composée de trois sections : Rechercher, Explorer et Résultats. Celles-ci sont décrites en détail ci-dessous.

Vous pouvez lancer une recherche aussi bien à partir de la section Rechercher qu’à partir de la section Explorer.

Rechercher

Cette section affiche vos critères de recherche courants et vous permet de soumettre des mots-clés à chercher dans la bibliographie.

  • Chaque nouvelle soumission ajoute les mots-clés saisis à la liste des critères de recherche.
  • Pour lancer une nouvelle recherche plutôt qu’ajouter des mots-clés à la recherche courante, utilisez le bouton Réinitialiser la recherche, puis entrez vos mots-clés.
  • Pour remplacer un mot-clé déjà soumis, veuillez d’abord le retirer en décochant sa case à cocher, puis soumettre un nouveau mot-clé.
  • Vous pouvez contrôler la portée de votre recherche en choisissant où chercher. Les options sont :
    • Partout : repère vos mots-clés dans tous les champs des références bibliographiques ainsi que dans le contenu textuel des documents disponibles.
    • Dans les auteurs ou contributeurs : repère vos mots-clés dans les noms d’auteurs ou de contributeurs.
    • Dans les titres : repère vos mots-clés dans les titres.
    • Dans les années de publication : repère vos mots-clés dans le champ d’année de publication (vous pouvez utiliser l’opérateur OU avec vos mots-clés pour trouver des références ayant différentes années de publication. Par exemple, 2020 OU 2021).
    • Dans tous les champs : repère vos mots-clés dans tous les champs des notices bibliographiques.
    • Dans les documents : repère vos mots-clés dans le contenu textuel des documents disponibles.
  • Vous pouvez utiliser les opérateurs booléens avec vos mots-clés :
    • ET : repère les références qui contiennent tous les termes fournis. Ceci est la relation par défaut entre les termes séparés d’un espace. Par exemple, a b est équivalent à a ET b.
    • OU : repère les références qui contiennent n’importe lequel des termes fournis. Par exemple, a OU b.
    • SAUF : exclut les références qui contiennent le terme fourni. Par exemple, SAUF a.
    • Les opérateurs booléens doivent être saisis en MAJUSCULES.
  • Vous pouvez faire des groupements logiques (avec les parenthèses) pour éviter les ambiguïtés lors de la combinaison de plusieurs opérateurs booléens. Par exemple, (a OU b) ET c.
  • Vous pouvez demander une séquence exacte de mots (avec les guillemets droits), par exemple "a b c". Par défaut la différence entre les positions des mots est de 1, ce qui signifie qu’une référence sera repérée si elle contient les mots et qu’ils sont consécutifs. Une distance maximale différente peut être fournie (avec le tilde), par exemple "a b"~2 permet jusqu’à un terme entre a et b, ce qui signifie que la séquence a c b pourrait être repérée aussi bien que a b.
  • Vous pouvez préciser que certains termes sont plus importants que d’autres (avec l’accent circonflexe). Par exemple, a^2 b c^0.5 indique que a est deux fois plus important que b dans le calcul de pertinence des résultats, tandis que c est de moitié moins important. Ce type de facteur peut être appliqué à un groupement logique, par exemple (a b)^3 c.
  • La recherche par mots-clés est insensible à la casse et les accents et la ponctuation sont ignorés.
  • Les terminaisons des mots sont amputées pour la plupart des champs, tels le titre, le résumé et les notes. L’amputation des terminaisons vous évite d’avoir à prévoir toutes les formes possibles d’un mot dans vos recherches. Ainsi, les termes municipal, municipale et municipaux, par exemple, donneront tous le même résultat. L’amputation des terminaisons n’est pas appliquée au texte des champs de noms, tels auteurs/contributeurs, éditeur, publication.

Explorer

Cette section vous permet d’explorer les catégories associées aux références.

  • Les catégories peuvent servir à affiner votre recherche. Cochez une catégorie pour l’ajouter à vos critères de recherche. Les résultats seront alors restreints aux références qui sont associées à cette catégorie.
  • Dé-cochez une catégorie pour la retirer de vos critères de recherche et élargir votre recherche.
  • Les nombres affichés à côté des catégories indiquent combien de références sont associées à chaque catégorie considérant les résultats de recherche courants. Ces nombres varieront en fonction de vos critères de recherche, de manière à toujours décrire le jeu de résultats courant. De même, des catégories et des facettes entières pourront disparaître lorsque les résultats de recherche ne contiennent aucune référence leur étant associées.
  • Une icône de flèche () apparaissant à côté d’une catégorie indique que des sous-catégories sont disponibles. Vous pouvez appuyer sur l’icône pour faire afficher la liste de ces catégories plus spécifiques. Par la suite, vous pouvez appuyer à nouveau pour masquer la liste. L’action d’afficher ou de masquer les sous-catégories ne modifie pas vos critères de recherche; ceci vous permet de rapidement explorer l’arborescence des catégories, si désiré.

Résultats

Cette section présente les résultats de recherche. Si aucun critère de recherche n’a été fourni, elle montre toute la bibliographie (jusqu’à 20 références par page).

  • Chaque référence de la liste des résultats est un hyperlien vers sa notice bibliographique complète. À partir de la notice, vous pouvez continuer à explorer les résultats de recherche en naviguant vers les notices précédentes ou suivantes de vos résultats de recherche, ou encore retourner à la liste des résultats.
  • Des hyperliens supplémentaires, tels que Consulter le document ou Consulter sur [nom d’un site web], peuvent apparaître sous un résultat de recherche. Ces liens vous fournissent un accès rapide à la ressource, des liens que vous trouverez également dans la notice bibliographique.
  • Le bouton Résumés vous permet d’activer ou de désactiver l’affichage des résumés dans la liste des résultats de recherche. Toutefois, activer l’affichage des résumés n’aura aucun effet sur les résultats pour lesquels aucun résumé n’est disponible.
  • Diverses options sont fournies pour permettre de contrôler l’ordonnancement les résultats de recherche. L’une d’elles est l’option de tri par Pertinence, qui classe les résultats du plus pertinent au moins pertinent. Le score utilisé à cette fin prend en compte la fréquence des mots ainsi que les champs dans lesquels ils apparaissent. Par exemple, si un terme recherché apparaît fréquemment dans une référence ou est l’un d’un très petit nombre de termes utilisé dans cette référence, cette référence aura probablement un score plus élevé qu’une autre où le terme apparaît moins fréquemment ou qui contient un très grand nombre de mots. De même, le score sera plus élevé si un terme est rare dans l’ensemble de la bibliographie que s’il est très commun. De plus, si un terme de recherche apparaît par exemple dans le titre d’une référence, le score de cette référence sera plus élevé que s’il apparaissait dans un champ moins important tel le résumé.
  • Le tri par Pertinence n’est disponible qu’après avoir soumis des mots-clés par le biais de la section Rechercher.
  • Les catégories sélectionnées dans la section Explorer n’ont aucun effet sur le tri par pertinence. Elles ne font que filtrer la liste des résultats.
Année de publication
  • Entre 2000 et 2025

Résultats 1 274 ressources

Recently addedDate décroissanteDate croissanteAuteur A-ZAuteur Z-ATitre A-ZTitre Z-A
  • 1
  • ...
  • 60
  • 61
  • 62
  • 63
  • 64
  • Page 64 de 64
Résumés
  • Elalem, S., & Pal, I. (2015). Mapping the vulnerability hotspots over Hindu-Kush Himalaya region to flooding disasters. Weather and Climate Extremes, 8, 46–58. https://doi.org/10.1016/j.wace.2014.12.001

    Abstract A disproportionate share of the global economic and human losses caused by environmental shocks is borne by people in the developing nations. The mountain region of Hindu-Kush Himalaya (HKH) in South Asia is threatened by numerous flooding events annually. An efficient disaster risk reduction often needs to rest upon location-based synoptic view of vulnerability. Resolving this deficit improves the ability to take risk reduction measures in a cost-effective way, and in doing so, strengthens the resilience of societies to flooding disasters. The central aim of this research is to identify the vulnerable locations across HKH boundary from the perspective of reported history of economic and human impacts due to occurrence of flooding disasters. A detailed analysis indicates a very high spatial heterogeneity in flooding disaster occurrence in the past 6 decades. The most recent decade reported highest number of disasters and greater spatial coverage as compared to the earlier decades. The data indicates that, in general, economic impacts of flooding disasters were notably higher in Pakistan, Afghanistan and Nepal. On the other hand, vulnerability scenarios with respect to human impacts were diverse for different countries. In terms of morbidity and mortality, Bangladesh, Pakistan, Bhutan and India were detected to be most susceptible to human impacts. Although Bhutan had seen lesser number of flooding disasters, higher population living within disaster prone region make them vulnerable. In summary, complex interactions between natural and socio-economic conditions play a dominant role to define and characterize the type and magnitude of vulnerability of HKH countries to disaster occurrence and their economic and human impacts.

  • Guillard-Gonçalves, C., Cutter, S. L., Emrich, C. T., & Zêzere, J. L. (2015). Application of Social Vulnerability Index (SoVI) and delineation of natural risk zones in Greater Lisbon, Portugal. Journal of Risk Research, 18(5), 651–674. https://doi.org/10.1080/13669877.2014.910689
    Consulter sur www.tandfonline.com
  • Jongman, B., Bierkens, M. F. P., Winsemius, H., Aerts, J. C. J. H., de Perez, E. C., van Aalst, M., Kron, W., Ward, P. B., & Ward, P. J. (2015). Declining vulnerability to river floods and the global benefits of adaptation. Proceedings of the National Academy of Sciences of the United States of America, 112(18). https://doi.org/10.1073/pnas.1414439112

    The global impacts of river floods are substantial and rising. Effective adaptation to the increasing risks requires an in-depth understanding of the physical and socioeconomic drivers of risk. Whereas the modeling of flood hazard and exposure has improved greatly, compelling evidence on spatiotemporal patterns in vulnerability of societies around the world is still lacking. Due to this knowledge gap, the effects of vulnerability on global flood risk are not fully understood, and future projections of fatalities and losses available today are based on simplistic assumptions or do not include vulnerability. We show for the first time (to our knowledge) that trends and fluctuations in vulnerability to river floods around the world can be estimated by dynamic high-resolution modeling of flood hazard and exposure. We find that rising per-capita income coincided with a global decline in vulnerability between 1980 and 2010, which is reflected in decreasing mortality and losses as a share of the people and gross domestic product exposed to inundation. The results also demonstrate that vulnerability levels in low- and high-income countries have been converging, due to a relatively strong trend of vulnerability reduction in developing countries. Finally, we present projections of flood losses and fatalities under 100 individual scenario and model combinations, and three possible global vulnerability scenarios. The projections emphasize that materialized flood risk largely results from human behavior and that future risk increases can be largely contained using effective disaster risk reduction strategies.

  • Koks, E., Jongman, B., Husby, T., & Botzen, W. J. W. (2015). Combining hazard, exposure and social vulnerability to provide lessons for flood risk management. Environmental Science & Policy, 47, 42–52. https://doi.org/10.1016/j.envsci.2014.10.013

    Flood risk assessments provide inputs for the evaluation of flood risk management (FRM) strategies. Traditionally, such risk assessments provide estimates of loss of life and economic damage. However, the effect of policy measures aimed at reducing risk also depends on the capacity of households to adapt and respond to floods, which in turn largely depends on their social vulnerability. This study shows how a joint assessment of hazard, exposure and social vulnerability provides valuable information for the evaluation of FRM strategies. The adopted methodology uses data on hazard and exposure combined with a social vulnerability index. The relevance of this state-of-the-art approach taken is exemplified in a case-study of Rotterdam, the Netherlands. The results show that not only a substantial share of the population can be defined as socially vulnerable, but also that the population is very heterogeneous, which is often ignored in traditional flood risk management studies. It is concluded that FRM measures, such as individual mitigation, evacuation or flood insurance coverage should not be applied homogenously across large areas, but instead should be tailored to local characteristics based on the socioeconomic characteristics of individual households and neighborhoods.

  • Cutter, S. L., Emrich, C. T., Morath, D. P., & Dunning, C. M. (2013). Integrating social vulnerability into federal flood risk management planning. Journal of Flood Risk Management, 6(4). https://doi.org/10.1111/jfr3.12018

    Abstract While flood risk management planning in the U nited S tates has focused on flood control structures designed to protect the economic value of property, it has consistently undervalued other social impacts associated with flooding. The US A rmy C orps of E ngineers ( USACE ) recently initiated research aimed at understanding how to incorporate social characteristics into the measures currently utilised in flood control project evaluation and consideration. This paper proposes a methodology for incorporating a known measure of social vulnerability, the S ocial V ulnerability I ndex ( SoVI ), into USACE civil works planning. Using the USACE S outh A tlantic D ivision as the study area, this paper evaluates eight different variations of the social vulnerability metric and their potential deployment in USACE projects. Each formulation is compared with the original‐computed SoVI as a means to test its spatial and statistical sensitivity, including an assessment of each variant's robustness, reducibility, scalability, and transferability. Results indicate that while it is possible to create simplified, yet robust, versions of SoVI for individual places, such ‘lite’ metrics tend to fall short in areas of scalability and transferability in relation to the original SoVI formulation.

    Consulter sur onlinelibrary.wiley.com
  • Cutter, S. L., Boruff, B., & Shirley, W. L. (2003). Social Vulnerability to Environmental Hazards. Social Science Quarterly, 84(2), 242–261. https://doi.org/10.1111/1540-6237.8402002

    County-level socioeconomic and demographic data were used to construct an index of social vulnerability to environmental hazards, called the Social Vulnerability Index (SoVI) for the United States based on 1990 data. Copyright (c) 2003 by the Southwestern Social Science Association.

  • Buffin-Bélanger, T., Maltais, D., & Gauthier, M. (Eds.). (2022). Les inondations au Québec: Risques, aménagement du territoire, impacts socioéconomiques et transformation des vulnérabilités. Presses de l’Université du Québec. https://doi.org/10.2307/j.ctv3405p58
    Consulter sur www.jstor.org
  • Chakraborty, L., Rus, H., Henstra, D., Thistlethwaite, J., Minano, A., & Scott, D. (2022). Exploring spatial heterogeneity and environmental injustices in exposure to flood hazards using geographically weighted regression. Environmental Research, 210, 112982. https://doi.org/10.1016/j.envres.2022.112982
    Consulter sur linkinghub.elsevier.com
  • Barzegar, R., Razzagh, S., Quilty, J., Adamowski, J., Kheyrollah Pour, H., & Booij, M. J. (2021). Improving GALDIT-based groundwater vulnerability predictive mapping using coupled resampling algorithms and machine learning models. Journal of Hydrology, 598. https://doi.org/10.1016/j.jhydrol.2021.126370
    Consulter sur linkinghub.elsevier.com
  • Catto, J. L., & Dowdy, A. (2021). Understanding compound hazards from a weather system perspective. Weather and Climate Extremes, 32. https://doi.org/10.1016/j.wace.2021.100313
    Consulter sur linkinghub.elsevier.com
  • Barzegar, R., Asghari Moghaddam, A., Norallahi, S., Inam, A., Adamowski, J., Alizadeh, M. R., & Bou Nassar, J. (2020). Modification of the DRASTIC Framework for Mapping Groundwater Vulnerability Zones. Groundwater, 58(3), 441–452. https://doi.org/10.1111/gwat.12919

    Abstract The DRASTIC technique is commonly used to assess groundwater vulnerability. The main disadvantage of the DRASTIC method is the difficulty associated with identifying appropriate ratings and weight assignments for each parameter. To mitigate this issue, ratings and weights can be approximated using different methods appropriate to the conditions of the study area. In this study, different linear (i.e., Wilcoxon test and statistical approaches) and nonlinear (Genetic algorithm [GA]) modifications for calibration of the DRASTIC framework using nitrate (NO 3 ) concentrations were compared through the preparation of groundwater vulnerability maps of the Meshqin‐Shahr plain, Iran. Twenty‐two groundwater samples were collected from wells in the study area, and their respective NO 3 concentrations were used to modify the ratings and weights of the DRASTIC parameters. The areas found to have the highest vulnerability were in the eastern, central, and western regions of the plain. Results showed that the modified DRASTIC frameworks performed well, compared to the unmodified DRASTIC. When measured NO 3 concentrations were correlated with the vulnerability indices produced by each method, the unmodified DRASTIC method performed most poorly, and the Wilcoxon–GA–DRASTIC method proved optimal. Compared to the unmodified DRASTIC method with an R 2 of 0.22, the Wilcoxon–GA–DRASTIC obtained a maximum R 2 value of 0.78. Modification of DRASTIC parameter ratings was found to be more efficient than the modification of the weights in establishing an accurately calibrated DRASTIC framework. However, modification of parameter ratings and weights together increased the R 2 value to the highest degree. , Article impact statement : The results showed that both linear and nonlinear methods are useful in modifying the ratings and weights of the DRASTIC method for assessing the groundwater vulnerability.

    Consulter sur ngwa.onlinelibrary.wiley.com
  • Chakraborty, L., Rus, H., Henstra, D., Thistlethwaite, J., & Scott, D. (2020). A place-based socioeconomic status index: Measuring social vulnerability to flood hazards in the context of environmental justice. International Journal of Disaster Risk Reduction, 43, 101394. https://doi.org/10.1016/j.ijdrr.2019.101394
    Consulter sur linkinghub.elsevier.com
  • Albano, R., Mancusi, L., Adamowski, J., Cantisani, A., & Sole, A. (2019). A GIS Tool for Mapping Dam-Break Flood Hazards in Italy. ISPRS International Journal of Geo-Information, 8(6), 250. https://doi.org/10.3390/ijgi8060250

    Mapping the delineation of areas that are flooded due to water control infrastructure failure is a critical issue. Practical difficulties often present challenges to the accurate and effective analysis of dam-break hazard areas. Such studies are expensive, lengthy, and require large volumes of incoming data and refined technical skills. The creation of cost-efficient geospatial tools provides rapid and inexpensive estimates of instantaneous dam-break (due to structural failure) flooded areas that complement, but do not replace, the results of hydrodynamic simulations. The current study implements a Geographic Information System (GIS) based method that can provide useful information regarding the delineation of dam-break flood-prone areas in both data-scarce environments and transboundary regions, in the absence of detailed studies. Moreover, the proposed tool enables, without advanced technical skills, the analysis of a wide number of case studies that support the prioritization of interventions, or, in emergency situations, the simulation of numerous initial hypotheses (e.g., the modification of initial water level/volume in the case of limited dam functionality), without incurring high computational time. The proposed model is based on the commonly available data for masonry dams, i.e., dam geometry (e.g., reservoir capacity, dam height, and crest length), and a Digital Elevation Model. The model allows for rapid and cost-effective dam-break hazard mapping by evaluating three components: (i) the dam-failure discharge hydrograph, (ii) the propagation of the flood, and (iii) the delineation of flood-prone areas. The tool exhibited high accuracy and reliability in the identification of hypothetical dam-break flood-prone areas when compared to the results of traditional hydrodynamic approaches, as applied to a dam in Basilicata (Southern Italy). In particular, the over- and under-estimation rates of the proposed tool, for the San Giuliano dam, Basilicata, were evaluated by comparing its outputs with flood inundation maps that were obtained by two traditional methods whil using a one-dimensional and a two-dimensional propagation model, resulting in a specificity value of roughly 90%. These results confirm that most parts of the flood map were correctly classified as flooded by the proposed GIS model. A sensitivity value of over 75% confirms that several zones were also correctly identified as non-flooded. Moreover, the overall effectiveness and reliability of the proposed model were evaluated, for the Gleno Dam (located in the Central Italian Alps), by comparing the results of literature studies concerning the application of monodimensional numerical models and the extent of the flooded area reconstructed by the available historical information, obtaining an accuracy of around 94%. Finally, the computational efficiency of the proposed tool was tested on a demonstrative application of 250 Italian arch and gravity dams. The results, when carried out using a PC, Pentium Intel Core i5 Processor CPU 3.2 GHz, 8 GB RAM, required about 73 min, showing the potential of such a tool applied to dam-break flood mapping for a large number of dams.

    Consulter sur www.mdpi.com
  • Cardona, O.-D., Van Aalst, M. K., Birkmann, J., Fordham, M., McGregor, G., Perez, R., Pulwarty, R. S., Schipper, E. L. F., Sinh, B. T., Décamps, H., Keim, M., Davis, I., Ebi, K. L., Lavell, A., Mechler, R., Murray, V., Pelling, M., Pohl, J., Smith, A.-O., & Thomalla, F. (2012). Determinants of Risk: Exposure and Vulnerability. In C. B. Field, V. Barros, T. F. Stocker, & Q. Dahe (Eds.), Managing the Risks of Extreme Events and Disasters to Advance Climate Change Adaptation (1st ed.). Cambridge University Press. https://doi.org/10.1017/CBO9781139177245.005
    Consulter sur www.cambridge.org
  • 1
  • ...
  • 60
  • 61
  • 62
  • 63
  • 64
  • Page 64 de 64
RIS

Format recommandé pour la plupart des logiciels de gestion de références bibliographiques

BibTeX

Format recommandé pour les logiciels spécialement conçus pour BibTeX

Flux web personnalisé
Dernière mise à jour depuis la base de données : 2025-06-15 06 h 30 (UTC)

Explorer

Axes du RIISQ

  • 1 - aléas, vulnérabilités et exposition (79)
  • 2 - enjeux de gestion et de gouvernance (47)
  • 3 - aspects biopsychosociaux (157)
  • 4 - réduction des vulnérabilités (97)
  • 5 - aide à la décision, à l’adaptation et à la résilience (99)

Enjeux majeurs

  • Inégalités et événements extrêmes (19)
  • Risques systémiques (16)

Lieux

  • Canada (hors-Québec) (132)
  • Québec (province) (64)
  • Europe (29)
  • États-Unis (22)

Membres du RIISQ

  • Étudiant.es (70)
  • Gachon, Philippe (64)
  • Maltais, Danielle (51)
  • Kinnard, Christophe (37)
  • Dorner, Sarah (32)
  • Généreux, Mélissa (29)
  • Rousseau, Alain (29)
  • Pham Van Bang, Damien (23)
  • Baraer, Michael (22)
  • Shakibaeinia, Ahmad (18)
  • Lizarralde, Gonzalo (17)
  • Guillemette, François (14)
  • Boivin, Maxime (13)
  • Lessard, Lily (13)
  • Hémond, Yannick (12)
  • Bourdeau-Brien, Michael (8)
  • Brunet, Alain (7)
  • Cloos, Patrick (7)
  • Gousse-Lessard, Anne-Sophie (7)
  • Nobert, Sébastien (5)
  • St-Amour, Nathalie (4)
  • Thomas, Isabelle (3)

Secteurs et disciplines

  • Nature et Technologie (193)
  • Santé (115)
  • Société et Culture (44)
  • Intersectoriel (4)

Types d'événements extrêmes

  • Inondations et crues (390)
  • Évènements liés au froid (neige, glace) (147)
  • Sécheresses et canicules (11)
  • Feux de forêts (7)

Types d'inondations

  • Fluviales (44)
  • Par embâcle (5)
  • Submersion côtière (5)
  • Pluviales (2)

Type de ressource

  • Article de colloque (18)
  • Article de journal (4)
  • Article de revue (1 012)
  • Billet de blog (3)
  • Chapitre de livre (44)
  • Document (9)
  • Enregistrement vidéo (1)
  • Jeu de données (1)
  • Livre (11)
  • Page Web (21)
  • Prépublication (8)
  • Présentation (1)
  • Rapport (53)
  • Thèse (88)

Année de publication

  • Entre 2000 et 2025
    • Entre 2000 et 2009 (31)
      • 2000 (4)
      • 2001 (1)
      • 2002 (4)
      • 2003 (4)
      • 2004 (3)
      • 2005 (2)
      • 2006 (2)
      • 2007 (6)
      • 2008 (2)
      • 2009 (3)
    • Entre 2010 et 2019 (438)
      • 2010 (5)
      • 2011 (8)
      • 2012 (10)
      • 2013 (10)
      • 2014 (14)
      • 2015 (36)
      • 2016 (50)
      • 2017 (33)
      • 2018 (119)
      • 2019 (153)
    • Entre 2020 et 2025 (805)
      • 2020 (138)
      • 2021 (141)
      • 2022 (191)
      • 2023 (170)
      • 2024 (142)
      • 2025 (23)

Langue de la ressource

  • Anglais (777)
  • Français (89)

Explorer

UQAM - Université du Québec à Montréal

  • Veille bibliographique sur les inondations
  • bibliotheques@uqam.ca

Accessibilité Web