Votre recherche

TanDEM-X digital elevation model (DEM) is a global DEM released by the German Aerospace Center (DLR) at outstanding resolution of 12 m. However, the procedure for its creation involves the combination of several DEMs from acquisitions spread between 2011 and 2014, which casts doubt on its value for precise glaciological change detection studies. In this work we present TanDEM-X DEM as a high-quality product ready for use in glaciological studies. We compare it to Aerial Laser Scanning (ALS)-based dataset from April 2013 (1 m), used as the ground-truth reference, and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) V003 DEM and SRTM v3 DEM (both 30 m), serving as representations of past glacier states. We use a method of sub-pixel coregistration of DEMs by Nuth and Kääb (2011) to determine the geometric accuracy of the products. In addition, we propose a slope-aspect heatmap-based workflow to remove the errors resulting from radar shadowing over steep terrain. Elevation difference maps obtained by subtraction of DEMs are analyzed to obtain accuracy assessments and glacier mass balance reconstructions. The vertical accuracy (± standard deviation) of TanDEM-X DEM over non-glacierized area is very good at 0.02 ± 3.48 m. Nevertheless, steep areas introduce large errors and their filtering is required for reliable results. The 30 m version of TanDEM-X DEM performs worse than the finer product, but its accuracy, −0.08 ± 7.57 m, is better than that of SRTM and ASTER. The ASTER DEM contains errors, possibly resulting from imperfect DEM creation from stereopairs over uniform ice surface. Universidad Glacier has been losing mass at a rate of −0.44 ± 0.08 m of water equivalent per year between 2000 and 2013. This value is in general agreement with previously reported mass balance estimated with the glaciological method for 2012–2014.

Abstract. Black carbon aerosol (BC), which is emitted from natural and anthropogenic sources (e.g., wildfires, coal burning), can contribute to magnify climate warming at high latitudes by darkening snow- and ice-covered surfaces, and subsequently lowering their albedo. Therefore, modeling the atmospheric transport and deposition of BC to the Arctic is important, and historical archives of BC accumulation in polar ice can help to validate such modeling efforts. Here we present a > 250-year ice-core record of refractory BC (rBC) deposition on Devon ice cap, Canada, spanning the years from 1735 to 1992. This is the first such record ever developed from the Canadian Arctic. The estimated mean deposition flux of rBC on Devon ice cap for 1963–1990 is 0.2 mg m−2 a−1, which is at the low end of estimates from Greenland ice cores obtained using the same analytical method ( ∼ 0.1–4 mg m−2 a−1). The Devon ice cap rBC record also differs from the Greenland records in that it shows only a modest increase in rBC deposition during the 20th century. In the Greenland records a pronounced rise in rBC is observed from the 1880s to the 1910s, which is largely attributed to midlatitude coal burning emissions. The deposition of contaminants such as sulfate and lead increased on Devon ice cap in the 20th century but no concomitant rise in rBC is recorded in the ice. Part of the difference with Greenland could be due to local factors such as melt–freeze cycles on Devon ice cap that may limit the detection sensitivity of rBC analyses in melt-impacted core samples, and wind scouring of winter snow at the coring site. Air back-trajectory analyses also suggest that Devon ice cap receives BC from more distant North American and Eurasian sources than Greenland, and aerosol mixing and removal during long-range transport over the Arctic Ocean likely masks some of the specific BC source–receptor relationships. Findings from this study suggest that there could be a large variability in BC aerosol deposition across the Arctic region arising from different transport patterns. This variability needs to be accounted for when estimating the large-scale albedo lowering effect of BC deposition on Arctic snow/ice.

We compared the spatiotemporal variability of temperatures and precipitation with that of the magnitude and timing of maximum daily spring flows in the geographically adjacent L’Assomption River (agricultural) and Matawin River (forested) watersheds during the period from 1932 to 2013. With regard to spatial variability, fall, winter, and spring temperatures as well as total precipitation are higher in the agricultural watershed than in the forested one. The magnitude of maximum daily spring flows is also higher in the first watershed as compared with the second, owing to substantial runoff, given that the amount of snow that gives rise to these flows is not significantly different in the two watersheds. These flows occur early in the season in the agricultural watershed because of the relatively high temperatures. With regard to temporal variability, minimum temperatures increased over time in both watersheds. Maximum temperatures in the fall only increased in the agricultural watershed. The amount of spring rain increased over time in both watersheds, whereas total precipitation increased significantly in the agricultural watershed only. However, the amount of snow decreased in the forested watershed. The magnitude of maximum daily spring flows increased over time in the forested watershed.

Although numerous studies have looked at the long-term trend of the temporal variability of winter temperature and precipitation in southern Quebec, no study has focused on the shifts in series means and the dependence between these two types of climate variables associated with this long-term trend. To fill these gaps, we used the Lombard method to detect the shifts in mean values and the copula method to detect any change in dependence between extreme (maximum and minimum) temperatures and precipitation (snow and rain) over the periods 1950–2000 (17 stations) and 1950–2010 (7 stations). During these two periods, the shifts in mean values of temperature and precipitation were recorded at less than half of the stations. The only significant change observed at the provincial scale is a decrease in the amount of snowfall, which occurred in many cases during the 1970s. This decrease affected stations on the north shore (continental temperate climate) more strongly than stations on the south shore (maritime temperate climate) of the St Lawrence River. However, this decrease in the amount of snowfall had no impact on the dependence over time between temperature and precipitation as snow.

Hydrological responses in cold regions are often complex and variable (both spatially and temporally) due to the complex and multiple interactions between the hydrological processes at play. Thus, there is a need to better understand and represent cold region hydrological processes within hydrological models. In this study, a physicallybased hydrological model has been developed using the Cold Regions Hydrological Model (CRHM) platform for the L’Acadie River Catchment in southern Quebec (Canada). Almost 70 % of the catchment is occupied by agricultural fields, being representative of the intensive farming landscape of the southern St-Lawrence lowlands, while the rest is mostly forested. The physical processes including blowing snow, snow interception in canopies, sublimation and snowmelt were simulated over 35 years using the CRHM platform. Hydrologic response units (HRUs), the smallest simulation spatial unit within the catchment, were derived based on the combination of land use/cover and vegetation types. Over the simulation period, considerable spatial variability was detected between agricultural and forested sites. Snow accumulation and associated snow water equivalent (SWE) were found to be higher in forested sites than agricultural sites, which can be explained by blowing snow transport from agricultural sites to the forested sites where aerodynamic roughness is greater. Higher rates of blowing snow sublimation were detected over the agricultural sites compared to snow intercepted in the forest canopies. This can be explained by the fact that there is a great amount of blowing snow over the agricultural sites, and thus available suspended snow for sublimation, while over the forested sites the snow is more firmly retained by the canopies and thus there is less blowing snow and consequently less blowing snow sublimation. In addition, although snow cover duration shows variation over the simulation period, the snow generally lasts longer in forested fields than in agricultural fields. Our findings indicating more snow in forested fields than agricultural (open) fields are contrary to the usual notion that there is less snow accumulation on forest ground due to the high rates of canopy sublimation. However, this is true for the landscapes dominated by forests, while our study area is dominated by agricultural fields, so snow erosion of agricultural fields and snow deposition in forested fields seem to compensate canopy losses. Taken together, it is shown that land use exerts a critical control on snow distributions in this type of landscape, and perhaps on possible implications for future snow hydrology of the catchment.

Snowmelt dominated regions are receiving increasing attention due to their noticeably rapid response to ongoing climate change, which raises concerns about the altered hydrological risks under climate change scenarios. This study aims to assess the climate change impacts on hydrology over two contrasted catchments in southern Québec: Acadie River and Montmorency River catchments. These river catchments represent two predominant landscapes of the St. Lawrence River watershed; an intensive farming landscape in the south shore lowlands and the forested landscape on the Canadian Shield on the north shore, respectively. In this study, a physically based hydrological model has been developed using the Cold Regions Hydrological Model (CRHM) for both of the catchments. The hydrological model outputs showed that we were able to simulate snow surveys and discharge measurements with a reasonable accuracy for both catchments. The acceptable performance of the model along with the strong physical basis of structure suggested that this model could be used for climate change sensitivity simulations. Based on the climate scenarios reviewed, a temperature increase up to 8°C and an increase in total precipitation up to 20% were analysed for both of the catchments. Both catchments were found to be sensitive to climate change, however the degree of sensitivity was found to be catchment specific. Snow processes in the Acadie River catchment were simulated to be more sensitive to warming than in the Montmorency River catchment. In case of 2°C warming, reduction in peak SWE was not be able to be compensated even by increased precipitation scenario. Given that, the Acadie River has already a mixed flow regime, even if 2°C warming is combined with an increase in precipitation, pluvial regime kept becoming more dominant, resulting in higher peaks of rain events. On the other hand, even 3°C of warming did not modify the flow regime of the Montmorency River. While there is shift towards earlier peak spring flows in both catchments, the shift was found to be more pronounced in the Acadie River. An earlier occurrence of snowmelt floods and an overall increase in winter streamflow during winter have been simulated for both catchments, which calls for renewed assessments of existing water supply and flood risk management strategies.

Abstract The snow melt from the High Atlas represents a crucial water resource for crop irrigation in the semiarid regions of Morocco. Recent studies have used assimilation of snow cover area data from high‐resolution optical sensors to compute the snow water equivalent and snow melt in other mountain regions. These techniques however require large model ensembles, and therefore it is a challenge to determine the adequate model resolution that yields accurate results with reasonable computation time. Here we study the sensitivity of an energy balance model to the resolution of the model grid for a pilot catchment in the High Atlas. We used a time series of 8‐m resolution snow cover area maps with an average revisit time of 7.5 days to evaluate the model results. The digital elevation model was generated from Pléiades stereo images and resampled from 8 to 30, 90, 250, 500, and 1,000 m. The results indicate that the model performs well from 8 to 250 m but the agreement with observations drops at 500 m. This is because significant features of the topography were too smoothed out to properly characterize the spatial variability of meteorological forcing, including solar radiation. We conclude that a resolution of 250 m might be sufficient in this area. This result is consistent with the shape of the semivariogram of the topographic slope, suggesting that this semivariogram analysis could be used to transpose our conclusion to other study regions. , Key Points A distributed energy balance snow model is applied in the High Atlas for the first time The model performance decreases at resolution coarser than 250 m This result is consistent with the semivariogram of the topographic slope