UQAM logo
Page d'accueil de l'UQAM Étudier à l'UQAM Bottin du personnel Carte du campus Bibliothèques Pour nous joindre

Service des bibliothèques

Veille bibliographique sur les inondations
UQAM logo
Veille bibliographique sur les inondations
  • Bibliography
  1. Vitrine des bibliographies
  2. Veille bibliographique sur les inondations
  3. Résultats
Veille bibliographique sur les inondationsVeille bibliographique sur les inondations
  • Bibliography

Votre recherche

Réinitialiser la recherche

Aide

L’interface de recherche est composée de trois sections : Rechercher, Explorer et Résultats. Celles-ci sont décrites en détail ci-dessous.

Vous pouvez lancer une recherche aussi bien à partir de la section Rechercher qu’à partir de la section Explorer.

Rechercher

Cette section affiche vos critères de recherche courants et vous permet de soumettre des mots-clés à chercher dans la bibliographie.

  • Chaque nouvelle soumission ajoute les mots-clés saisis à la liste des critères de recherche.
  • Pour lancer une nouvelle recherche plutôt qu’ajouter des mots-clés à la recherche courante, utilisez le bouton Réinitialiser la recherche, puis entrez vos mots-clés.
  • Pour remplacer un mot-clé déjà soumis, veuillez d’abord le retirer en décochant sa case à cocher, puis soumettre un nouveau mot-clé.
  • Vous pouvez contrôler la portée de votre recherche en choisissant où chercher. Les options sont :
    • Partout : repère vos mots-clés dans tous les champs des références bibliographiques ainsi que dans le contenu textuel des documents disponibles.
    • Dans les auteurs ou contributeurs : repère vos mots-clés dans les noms d’auteurs ou de contributeurs.
    • Dans les titres : repère vos mots-clés dans les titres.
    • Dans les années de publication : repère vos mots-clés dans le champ d’année de publication (vous pouvez utiliser l’opérateur OU avec vos mots-clés pour trouver des références ayant différentes années de publication. Par exemple, 2020 OU 2021).
    • Dans tous les champs : repère vos mots-clés dans tous les champs des notices bibliographiques.
    • Dans les documents : repère vos mots-clés dans le contenu textuel des documents disponibles.
  • Vous pouvez utiliser les opérateurs booléens avec vos mots-clés :
    • ET : repère les références qui contiennent tous les termes fournis. Ceci est la relation par défaut entre les termes séparés d’un espace. Par exemple, a b est équivalent à a ET b.
    • OU : repère les références qui contiennent n’importe lequel des termes fournis. Par exemple, a OU b.
    • SAUF : exclut les références qui contiennent le terme fourni. Par exemple, SAUF a.
    • Les opérateurs booléens doivent être saisis en MAJUSCULES.
  • Vous pouvez faire des groupements logiques (avec les parenthèses) pour éviter les ambiguïtés lors de la combinaison de plusieurs opérateurs booléens. Par exemple, (a OU b) ET c.
  • Vous pouvez demander une séquence exacte de mots (avec les guillemets droits), par exemple "a b c". Par défaut la différence entre les positions des mots est de 1, ce qui signifie qu’une référence sera repérée si elle contient les mots et qu’ils sont consécutifs. Une distance maximale différente peut être fournie (avec le tilde), par exemple "a b"~2 permet jusqu’à un terme entre a et b, ce qui signifie que la séquence a c b pourrait être repérée aussi bien que a b.
  • Vous pouvez préciser que certains termes sont plus importants que d’autres (avec l’accent circonflexe). Par exemple, a^2 b c^0.5 indique que a est deux fois plus important que b dans le calcul de pertinence des résultats, tandis que c est de moitié moins important. Ce type de facteur peut être appliqué à un groupement logique, par exemple (a b)^3 c.
  • La recherche par mots-clés est insensible à la casse et les accents et la ponctuation sont ignorés.
  • Les terminaisons des mots sont amputées pour la plupart des champs, tels le titre, le résumé et les notes. L’amputation des terminaisons vous évite d’avoir à prévoir toutes les formes possibles d’un mot dans vos recherches. Ainsi, les termes municipal, municipale et municipaux, par exemple, donneront tous le même résultat. L’amputation des terminaisons n’est pas appliquée au texte des champs de noms, tels auteurs/contributeurs, éditeur, publication.

Explorer

Cette section vous permet d’explorer les catégories associées aux références.

  • Les catégories peuvent servir à affiner votre recherche. Cochez une catégorie pour l’ajouter à vos critères de recherche. Les résultats seront alors restreints aux références qui sont associées à cette catégorie.
  • Dé-cochez une catégorie pour la retirer de vos critères de recherche et élargir votre recherche.
  • Les nombres affichés à côté des catégories indiquent combien de références sont associées à chaque catégorie considérant les résultats de recherche courants. Ces nombres varieront en fonction de vos critères de recherche, de manière à toujours décrire le jeu de résultats courant. De même, des catégories et des facettes entières pourront disparaître lorsque les résultats de recherche ne contiennent aucune référence leur étant associées.
  • Une icône de flèche () apparaissant à côté d’une catégorie indique que des sous-catégories sont disponibles. Vous pouvez appuyer sur l’icône pour faire afficher la liste de ces catégories plus spécifiques. Par la suite, vous pouvez appuyer à nouveau pour masquer la liste. L’action d’afficher ou de masquer les sous-catégories ne modifie pas vos critères de recherche; ceci vous permet de rapidement explorer l’arborescence des catégories, si désiré.

Résultats

Cette section présente les résultats de recherche. Si aucun critère de recherche n’a été fourni, elle montre toute la bibliographie (jusqu’à 20 références par page).

  • Chaque référence de la liste des résultats est un hyperlien vers sa notice bibliographique complète. À partir de la notice, vous pouvez continuer à explorer les résultats de recherche en naviguant vers les notices précédentes ou suivantes de vos résultats de recherche, ou encore retourner à la liste des résultats.
  • Des hyperliens supplémentaires, tels que Consulter le document ou Consulter sur [nom d’un site web], peuvent apparaître sous un résultat de recherche. Ces liens vous fournissent un accès rapide à la ressource, des liens que vous trouverez également dans la notice bibliographique.
  • Le bouton Résumés vous permet d’activer ou de désactiver l’affichage des résumés dans la liste des résultats de recherche. Toutefois, activer l’affichage des résumés n’aura aucun effet sur les résultats pour lesquels aucun résumé n’est disponible.
  • Diverses options sont fournies pour permettre de contrôler l’ordonnancement les résultats de recherche. L’une d’elles est l’option de tri par Pertinence, qui classe les résultats du plus pertinent au moins pertinent. Le score utilisé à cette fin prend en compte la fréquence des mots ainsi que les champs dans lesquels ils apparaissent. Par exemple, si un terme recherché apparaît fréquemment dans une référence ou est l’un d’un très petit nombre de termes utilisé dans cette référence, cette référence aura probablement un score plus élevé qu’une autre où le terme apparaît moins fréquemment ou qui contient un très grand nombre de mots. De même, le score sera plus élevé si un terme est rare dans l’ensemble de la bibliographie que s’il est très commun. De plus, si un terme de recherche apparaît par exemple dans le titre d’une référence, le score de cette référence sera plus élevé que s’il apparaissait dans un champ moins important tel le résumé.
  • Le tri par Pertinence n’est disponible qu’après avoir soumis des mots-clés par le biais de la section Rechercher.
  • Les catégories sélectionnées dans la section Explorer n’ont aucun effet sur le tri par pertinence. Elles ne font que filtrer la liste des résultats.
Membres du RIISQ
  • Kinnard, Christophe

Résultats 37 ressources

Recently addedDate décroissanteDate croissanteAuteur A-ZAuteur Z-ATitre A-ZTitre Z-A
  • 1
  • 2
  • Page 2 de 2
Résumés
  • Khani, H. M., Kinnard, C., Gascoin, S., & Lévesque, E. (2023). Fine‐scale environment control on ground surface temperature and thaw depth in a High Arctic tundra landscape. Permafrost and Periglacial Processes, 34(4), 467–480. https://doi.org/10.1002/ppp.2203

    Abstract Surface conditions are known to mediate the impacts of climate warming on permafrost. This calls for a better understanding of the environmental conditions that control the thermal regime and the depth of the active layer, especially within heterogeneous tundra landscapes. This study analyzed the spatial relationships between thaw depths, ground surface temperature (GST), and environmental conditions in a High Arctic tundra environment at Bylot Island, Nunavut, Canada. Measurements were distributed within the two dominant landforms, namely earth hummocks and low‐center polygons, and across a topographic gradient. Our results revealed that GST and thaw depth were highly heterogeneous, varying by up to 3.7°C and by more than 20 cm over short distances (<1 m) within periglacial landforms. This microscale variability sometimes surpassed the variability at the hillslope scale, especially in summer. Late‐winter snowpack thickness was found to be the prime control on the spatial variability in winter soil temperatures due to the highly heterogeneous snow cover induced by blowing snow, and this thermal effect carried over into summer. However, microtopography was the predominant driver of the spatial variability in summer GST, followed by altitude and moss thickness. In contrast, the spatial variability in thaw depth was influenced predominantly by variations in moss thickness. Hence, summer microclimate conditions dominated active layer development, but a thicker snowpack favored soil cooling in the following summer, due to the later disappearance of snow cover. These results enhance our understanding of High Arctic tundra environments and highlight the complexity of considering surface feedback effects in future projections of permafrost states within heterogeneous tundra landscapes.

    Consulter sur onlinelibrary.wiley.com
  • Dharmadasa, V., Kinnard, C., & Baraër, M. (2023). Topographic and vegetation controls of the spatial distribution of snow depth in agro-forested environments by UAV lidar. The Cryosphere, 17(3), 1225–1246. https://doi.org/10.5194/tc-17-1225-2023

    Abstract. Accurate knowledge of snow depth distributions in forested regions is crucial for applications in hydrology and ecology. In such a context, understanding and assessing the effect of vegetation and topographic conditions on snow depth variability is required. In this study, the spatial distribution of snow depth in two agro-forested sites and one coniferous site in eastern Canada was analyzed for topographic and vegetation effects on snow accumulation. Spatially distributed snow depths were derived by unmanned aerial vehicle light detection and ranging (UAV lidar) surveys conducted in 2019 and 2020. Distinct patterns of snow accumulation and erosion in open areas (fields) versus adjacent forested areas were observed in lidar-derived snow depth maps at all sites. Omnidirectional semi-variogram analysis of snow depths showed the existence of a scale break distance of less than 10 m in the forested area at all three sites, whereas open areas showed comparatively larger scale break distances (i.e., 11–14 m). The effect of vegetation and topographic variables on the spatial variability in snow depths at each site was investigated with random forest models. Results show that the underlying topography and the wind redistribution of snow along forest edges govern the snow depth variability at agro-forested sites, while forest structure variability dominates snow depth variability in the coniferous environment. These results highlight the importance of including and better representing these processes in physically based models for accurate estimates of snowpack dynamics.

    Consulter sur tc.copernicus.org
  • Dharmadasa, V., Kinnard, C., & Baraër, M. (2022). An Accuracy Assessment of Snow Depth Measurements in Agro-Forested Environments by UAV Lidar. Remote Sensing. https://doi.org/10.3390/rs14071649

    This study assesses the performance of UAV lidar system in measuring high-resolution snow depths in agro-forested landscapes in southern Québec, Canada. We used manmade, mobile ground control points in summer and winter surveys to assess the absolute vertical accuracy of the point cloud. Relative accuracy was determined by a repeat flight over one survey block. Estimated absolute and relative errors were within the expected accuracy of the lidar (~5 and ~7 cm, respectively). The validation of lidar-derived snow depths with ground-based measurements showed a good agreement, however with higher uncertainties observed in forested areas compared with open areas. A strip alignment procedure was used to attempt the correction of misalignment between overlapping flight strips. However, the significant improvement of inter-strip relative accuracy brought by this technique was at the cost of the absolute accuracy of the entire point cloud. This phenomenon was further confirmed by the degraded performance of the strip-aligned snow depths compared with ground-based measurements. This study shows that boresight calibrated point clouds without strip alignment are deemed to be adequate to provide centimeter-level accurate snow depth maps with UAV lidar. Moreover, this study provides some of the earliest snow depth mapping results in agro-forested landscapes based on UAV lidar.

  • Podgórski, J., Pętlicki, M., Fernández, A., Urrutia, R., & Kinnard, C. (2023). Evaluating the impact of the Central Chile Mega Drought on debris cover, broadband albedo, and surface drainage system of a Dry Andes glacier. Science of The Total Environment, 905, 166907. https://doi.org/10.1016/j.scitotenv.2023.166907
    Consulter sur linkinghub.elsevier.com
  • Clermont, M., Kinnard, C., Dubé-Richard, D., Campeau, S., Bordeleau, P.-A., de Grandpré, A., Ziyad, J., & Roy, A. (2023). Using remote sensing to assess how intensive agriculture impacts the turbidity of a fluvial lake floodplain. Journal of Great Lakes Research, 49(6), 102240. https://doi.org/10.1016/j.jglr.2023.102240
    Consulter sur linkinghub.elsevier.com
  • Bussières, S., Kinnard, C., Clermont, M., Campeau, S., Dubé-Richard, D., Bordeleau, P.-A., & Roy, A. (2022). Monitoring Water Turbidity in a Temperate Floodplain Using UAV: Potential and Challenges. Canadian Journal of Remote Sensing, 48(4), 565–574. https://doi.org/10.1080/07038992.2022.2096580
    Consulter sur www.tandfonline.com
  • Kinnard, C., Nemri, S., & Assani, A. (2023). Mechanisms of spring freshet generation in southern Quebec, Canada. https://doi.org/10.22541/au.169443388.82957481/v1

    Seasonal forecasting of spring floods in snow-covered basins is challenging due to the ambiguity in the driving processes, uncertain estimations of antecedent catchment conditions and the choice of predictor variables. In this study we attempt to improve the prediction of spring flow peaks in southern Quebec, Canada, by studying the preconditioning mechanisms of runoff generation and their impact on inter-annual variations in the timing and magnitude of spring peak flow. Historical observations and simulated data from a hydrological and snowmelt model were used to study the antecedent conditions that control flood characteristics in twelve snow-dominated catchments. Maximum snow accumulation (peak SWE), snowmelt and rainfall volume, snowmelt and rainfall intensity, and soil moisture were estimated during the pre-flood period. Stepwise multivariate linear regression analysis was used to identify the most relevant predictors and assess their relative contribution to the interannual variability of flood characteristics. Results show that interannual variations in spring peak flow are controlled differently between basins. Overall, interannual variations in peak flow were mainly governed, in order of importance, by snowmelt intensity, rainfall intensity, snowmelt volume, rainfall volume, peak SWE, and soil moisture. Variations in the timing of peak flow were controlled in most basins by rainfall volume and rainfall and snowmelt intensity. In the northernmost, snow-dominated basins, pre-flood rainfall amount and intensity mostly controlled peak flow variability, whereas in the southern, rainier basins snowpack conditions and melt dynamics controlled this variability. Snowpack interannual variations were found to be less important than variations in rainfall in forested basins, where snowmelt is more gradual. Conversely, peak flow was more sensitive to snowpack conditions in agricultural basins where snowmelt occurs faster. These results highlight the impact of land cover and use on spring flood generation mechanism, and the limited predictability potential of spring floods using simple methods and antecedent hydrological factors.

    Consulter sur www.authorea.com
  • Kinnard, C., Larouche, O., Demuth, M. N., & Menounos, B. (2022). Modelling glacier mass balance and climate sensitivity in the context of sparse observations: application to Saskatchewan Glacier, western Canada. The Cryosphere, 16(8), 3071–3099. https://doi.org/10.5194/tc-16-3071-2022

    Abstract. Glacier mass balance models are needed at sites with scarce long-term observations to reconstruct past glacier mass balance and assess its sensitivity to future climate change. In this study, North American Regional Reanalysis (NARR) data were used to force a physically based, distributed glacier mass balance model of Saskatchewan Glacier for the historical period 1979–2016 and assess its sensitivity to climate change. A 2-year record (2014–2016) from an on-glacier automatic weather station (AWS) and historical precipitation records from nearby permanent weather stations were used to downscale air temperature, relative humidity, wind speed, incoming solar radiation and precipitation from the NARR to the station sites. The model was run with fixed (1979, 2010) and time-varying (dynamic) geometry using a multitemporal digital elevation model dataset. The model showed a good performance against recent (2012–2016) direct glaciological mass balance observations as well as with cumulative geodetic mass balance estimates. The simulated mass balance was not very sensitive to the NARR spatial interpolation method, as long as station data were used for bias correction. The simulated mass balance was however sensitive to the biases in NARR precipitation and air temperature, as well as to the prescribed precipitation lapse rate and ice aerodynamic roughness lengths, showing the importance of constraining these two parameters with ancillary data. The glacier-wide simulated energy balance regime showed a large contribution (57 %) of turbulent (sensible and latent) heat fluxes to melting in summer, higher than typical mid-latitude glaciers in continental climates, which reflects the local humid “icefield weather” of the Columbia Icefield. The static mass balance sensitivity to climate was assessed for prescribed changes in regional mean air temperature between 0 and 7 ∘C and precipitation between −20 % and +20 %, which comprise the spread of ensemble Representative Concentration Pathway (RCP) climate scenarios for the mid (2041–2070) and late (2071–2100) 21st century. The climate sensitivity experiments showed that future changes in precipitation would have a small impact on glacier mass balance, while the temperature sensitivity increases with warming, from −0.65 to −0.93 m w.e. a−1 ∘C−1. The mass balance response to warming was driven by a positive albedo feedback (44 %), followed by direct atmospheric warming impacts (24 %), a positive air humidity feedback (22 %) and a positive precipitation phase feedback (10 %). Our study underlines the key role of albedo and air humidity in modulating the response of winter-accumulation type mountain glaciers and upland icefield-outlet glacier settings to climate.

    Consulter sur tc.copernicus.org
  • Guerfi, N., Assani, A. A., Mesfioui, M., & Kinnard, C. (2015). Comparison of the temporal variability of winter daily extreme temperatures and precipitations in southern Quebec (Canada) using the Lombard and copula methods. International Journal of Climatology, 35(14). https://doi.org/10.1002/joc.4282

    Although numerous studies have looked at the long-term trend of the temporal variability of winter temperature and precipitation in southern Quebec, no study has focused on the shifts in series means and the dependence between these two types of climate variables associated with this long-term trend. To fill these gaps, we used the Lombard method to detect the shifts in mean values and the copula method to detect any change in dependence between extreme (maximum and minimum) temperatures and precipitation (snow and rain) over the periods 1950–2000 (17 stations) and 1950–2010 (7 stations). During these two periods, the shifts in mean values of temperature and precipitation were recorded at less than half of the stations. The only significant change observed at the provincial scale is a decrease in the amount of snowfall, which occurred in many cases during the 1970s. This decrease affected stations on the north shore (continental temperate climate) more strongly than stations on the south shore (maritime temperate climate) of the St Lawrence River. However, this decrease in the amount of snowfall had no impact on the dependence over time between temperature and precipitation as snow.

  • Dharmadasa, V., Kinnard, C., & Baraër, M. (2024). Meteorological control on snow depth evolution and snowpack energy exchanges in an agro-forested environment by a measurement-based approach: A case study in Sainte-Marthe, Eastern Canada. Agricultural and Forest Meteorology, 347. https://doi.org/10.1016/j.agrformet.2024.109915
    Consulter sur linkinghub.elsevier.com
  • Aygün, O., Kinnard, C., & Campeau, S. (2018). Simulation of snow transport and sublimation in an agricultural river catchment, southern Quebec, Canada. Japan Geoscience Union. https://www.semanticscholar.org/paper/Simulation-of-snow-transport-and-sublimation-in-an-Ayg%C3%BCn-Kinnard/7a46d302cfb9fe08e02a80d68fb967fb1e850fd7

    Hydrological responses in cold regions are often complex and variable (both spatially and temporally) due to the complex and multiple interactions between the hydrological processes at play. Thus, there is a need to better understand and represent cold region hydrological processes within hydrological models. In this study, a physicallybased hydrological model has been developed using the Cold Regions Hydrological Model (CRHM) platform for the L’Acadie River Catchment in southern Quebec (Canada). Almost 70 % of the catchment is occupied by agricultural fields, being representative of the intensive farming landscape of the southern St-Lawrence lowlands, while the rest is mostly forested. The physical processes including blowing snow, snow interception in canopies, sublimation and snowmelt were simulated over 35 years using the CRHM platform. Hydrologic response units (HRUs), the smallest simulation spatial unit within the catchment, were derived based on the combination of land use/cover and vegetation types. Over the simulation period, considerable spatial variability was detected between agricultural and forested sites. Snow accumulation and associated snow water equivalent (SWE) were found to be higher in forested sites than agricultural sites, which can be explained by blowing snow transport from agricultural sites to the forested sites where aerodynamic roughness is greater. Higher rates of blowing snow sublimation were detected over the agricultural sites compared to snow intercepted in the forest canopies. This can be explained by the fact that there is a great amount of blowing snow over the agricultural sites, and thus available suspended snow for sublimation, while over the forested sites the snow is more firmly retained by the canopies and thus there is less blowing snow and consequently less blowing snow sublimation. In addition, although snow cover duration shows variation over the simulation period, the snow generally lasts longer in forested fields than in agricultural fields. Our findings indicating more snow in forested fields than agricultural (open) fields are contrary to the usual notion that there is less snow accumulation on forest ground due to the high rates of canopy sublimation. However, this is true for the landscapes dominated by forests, while our study area is dominated by agricultural fields, so snow erosion of agricultural fields and snow deposition in forested fields seem to compensate canopy losses. Taken together, it is shown that land use exerts a critical control on snow distributions in this type of landscape, and perhaps on possible implications for future snow hydrology of the catchment.

    Consulter sur www.semanticscholar.org
  • Aygün, O., Kinnard, C., Campeau, S., & Pomeroy, J. W. (2022). Landscape and climate conditions influence the hydrological sensitivity to climate change in eastern Canada. Journal of Hydrology, 615, 128595. https://doi.org/10.1016/j.jhydrol.2022.128595
    Consulter sur linkinghub.elsevier.com
  • Aygün, O., Kinnard, C., & Campeau, S. (2019). Climate Change Impacts on Catchment Hydrology in Eastern Canada. 2019. https://ui.adsabs.harvard.edu/abs/2019AGUFM.C33B1572A

    Snowmelt dominated regions are receiving increasing attention due to their noticeably rapid response to ongoing climate change, which raises concerns about the altered hydrological risks under climate change scenarios. This study aims to assess the climate change impacts on hydrology over two contrasted catchments in southern Québec: Acadie River and Montmorency River catchments. These river catchments represent two predominant landscapes of the St. Lawrence River watershed; an intensive farming landscape in the south shore lowlands and the forested landscape on the Canadian Shield on the north shore, respectively. In this study, a physically based hydrological model has been developed using the Cold Regions Hydrological Model (CRHM) for both of the catchments. The hydrological model outputs showed that we were able to simulate snow surveys and discharge measurements with a reasonable accuracy for both catchments. The acceptable performance of the model along with the strong physical basis of structure suggested that this model could be used for climate change sensitivity simulations. Based on the climate scenarios reviewed, a temperature increase up to 8°C and an increase in total precipitation up to 20% were analysed for both of the catchments. Both catchments were found to be sensitive to climate change, however the degree of sensitivity was found to be catchment specific. Snow processes in the Acadie River catchment were simulated to be more sensitive to warming than in the Montmorency River catchment. In case of 2°C warming, reduction in peak SWE was not be able to be compensated even by increased precipitation scenario. Given that, the Acadie River has already a mixed flow regime, even if 2°C warming is combined with an increase in precipitation, pluvial regime kept becoming more dominant, resulting in higher peaks of rain events. On the other hand, even 3°C of warming did not modify the flow regime of the Montmorency River. While there is shift towards earlier peak spring flows in both catchments, the shift was found to be more pronounced in the Acadie River. An earlier occurrence of snowmelt floods and an overall increase in winter streamflow during winter have been simulated for both catchments, which calls for renewed assessments of existing water supply and flood risk management strategies.

    Consulter sur ui.adsabs.harvard.edu
  • Assani, A. A., Zeroual, A., Kinnard, C., & Roy, A. (2023). The new ‘surface storage’ concept versus the old ‘sponge effect’ concept: application to the analysis of the spatio-temporal variability of the annual daily maximum flow characteristics in southern Quebec (Canada). Journal of Water and Climate Change, 14(8), 2543–2563. https://doi.org/10.2166/wcc.2023.429

    Abstract This study confronts the new concept of ‘surface storage’ with the old concept of ‘sponge effect’ to explain the spatio-temporal variability of the annual daily maximum flows measured in 17 watersheds of southern Quebec during the period 1930–2019. The new concept takes into account the hydrological impacts of wetlands and other topographic components of the landscape (lakes, depressions, ditches, etc.) while that of the sponge effect only takes into account the hydrological impacts of wetlands. With regard to spatial variability, the area of wetlands and other water bodies is the variable best correlated negatively with the magnitude but positively with the duration of flows. As for the temporal variability, the application of the long-term trend tests revealed a significant increase in the magnitude and, to a lesser extent, the duration of the flows occurring in the watersheds of the north shore characterized by a greater area of wetlands and other water bodies (&gt;5%). This increase is explained by the fact that the storage capacity of these land types, which remains unchanged over time, does not make it possible to store the surplus runoff water brought by the increase in rainfall during the snowmelt season.

    Consulter sur iwaponline.com
  • Assani, A. A., Maloney-Dumont, V., Pothier-Champagne, A., Kinnard, C., & Quéssy, J.-F. (2019). Comparison of the temporal variability of summer temperature and rainfall as it relates to climate indices in southern Quebec (Canada). Theoretical and Applied Climatology, 137(3–4), 2425–2435. https://doi.org/10.1007/s00704-018-2750-8
    Consulter sur link.springer.com
  • de Grandpré, A., Kinnard, C., & Bertolo, A. (2022). Open-Source Analysis of Submerged Aquatic Vegetation Cover in Complex Waters Using High-Resolution Satellite Remote Sensing: An Adaptable Framework. Remote Sensing, 14(2). https://doi.org/10.3390/rs14020267

    Despite being recognized as a key component of shallow-water ecosystems, submerged aquatic vegetation (SAV) remains difficult to monitor over large spatial scales. Because of SAV’s structuring capabilities, high-resolution monitoring of submerged landscapes could generate highly valuable ecological data. Until now, high-resolution remote sensing of SAV has been largely limited to applications within costly image analysis software. In this paper, we propose an example of an adaptable open-sourced object-based image analysis (OBIA) workflow to generate SAV cover maps in complex aquatic environments. Using the R software, QGIS and Orfeo Toolbox, we apply radiometric calibration, atmospheric correction, a de-striping correction, and a hierarchical iterative OBIA random forest classification to generate SAV cover maps based on raw DigitalGlobe multispectral imagery. The workflow is applied to images taken over two spatially complex fluvial lakes in Quebec, Canada, using Quickbird-02 and Worldview-03 satellites. Classification performance based on training sets reveals conservative SAV cover estimates with less than 10% error across all classes except for lower SAV growth forms in the most turbid waters. In light of these results, we conclude that it is possible to monitor SAV distribution using high-resolution remote sensing within an open-sourced environment with a flexible and functional workflow.

  • Baba, M. W., Gascoin, S., Kinnard, C., Marchane, A., & Hanich, L. (2019). Effect of Digital Elevation Model Resolution on the Simulation of the Snow Cover Evolution in the High Atlas. Water Resources Research, 55(7), 5360–5378. https://doi.org/10.1029/2018WR023789

    Abstract The snow melt from the High Atlas represents a crucial water resource for crop irrigation in the semiarid regions of Morocco. Recent studies have used assimilation of snow cover area data from high‐resolution optical sensors to compute the snow water equivalent and snow melt in other mountain regions. These techniques however require large model ensembles, and therefore it is a challenge to determine the adequate model resolution that yields accurate results with reasonable computation time. Here we study the sensitivity of an energy balance model to the resolution of the model grid for a pilot catchment in the High Atlas. We used a time series of 8‐m resolution snow cover area maps with an average revisit time of 7.5 days to evaluate the model results. The digital elevation model was generated from Pléiades stereo images and resampled from 8 to 30, 90, 250, 500, and 1,000 m. The results indicate that the model performs well from 8 to 250 m but the agreement with observations drops at 500 m. This is because significant features of the topography were too smoothed out to properly characterize the spatial variability of meteorological forcing, including solar radiation. We conclude that a resolution of 250 m might be sufficient in this area. This result is consistent with the shape of the semivariogram of the topographic slope, suggesting that this semivariogram analysis could be used to transpose our conclusion to other study regions. , Key Points A distributed energy balance snow model is applied in the High Atlas for the first time The model performance decreases at resolution coarser than 250 m This result is consistent with the semivariogram of the topographic slope

    Consulter sur agupubs.onlinelibrary.wiley.com
  • 1
  • 2
  • Page 2 de 2
RIS

Format recommandé pour la plupart des logiciels de gestion de références bibliographiques

BibTeX

Format recommandé pour les logiciels spécialement conçus pour BibTeX

Flux web personnalisé
Dernière mise à jour depuis la base de données : 2025-06-15 06 h 30 (UTC)

Explorer

Axes du RIISQ

  • 5 - aide à la décision, à l’adaptation et à la résilience (2)

Lieux

  • Québec (province) (7)
  • Canada (hors-Québec) (2)

Membres du RIISQ

  • Kinnard, Christophe
  • Étudiant.es (6)
  • Baraer, Michael (4)

Secteurs et disciplines

  • Nature et Technologie (8)
  • Société et Culture (5)

Types d'événements extrêmes

  • Évènements liés au froid (neige, glace) (21)
  • Inondations et crues (2)
  • Sécheresses et canicules (1)

Type de ressource

  • Article de revue (36)
  • Prépublication (1)

Année de publication

  • Entre 2000 et 2025 (37)
    • Entre 2010 et 2019 (10)
      • 2015 (1)
      • 2016 (1)
      • 2018 (4)
      • 2019 (4)
    • Entre 2020 et 2025 (27)
      • 2020 (6)
      • 2021 (4)
      • 2022 (8)
      • 2023 (7)
      • 2024 (2)

Langue de la ressource

  • Anglais (24)

Explorer

UQAM - Université du Québec à Montréal

  • Veille bibliographique sur les inondations
  • bibliotheques@uqam.ca

Accessibilité Web