Votre recherche

The identification of bedforms has an important role in the study of seafloor morphology. The presence of these dynamic structures on the seafloor represents a hazard for navigation. They also influence the hydrodynamic simulation models used in the context, for example, of coastal flooding. Generally, multiBeam EchoSounders (MBES) are used to survey these bedforms. Unfortunately, the coverage of the MBES is limited to small areas per survey. Therefore, the analysis of large areas of interest (like navigation channels) requires the integration of different datasets acquired over overlapping areas at different times. The presence of spatial and temporal inconsistencies between these datasets may significantly affect the study of bedforms, which are subject to many natural processes (e.g. tides; flow). This paper proposes a novel approach to integrate multisource bathymetric datasets to study bedforms. The proposed approach is based on consolidating multisource datasets and applying the Empirical Bayesian Kriging interpolation for the creation of a multisource Digital Bathymetric Model (DBM). It has been designed to be adapted for estuarine areas with a high dynamism of the seafloor, characteristic of the fluvio-marine regime of the Estuary of the Saint-Lawrence River. This area is distinguished by a high tidal cycle and the presence of fields of dunes. The study involves MBES data that was acquired daily over a field of dunes in this area over the span of four days for the purpose of monitoring the morphology and migration of dunes. The proposed approach performs well with a resulting surface with a reduced error relative to the original data compared to existing approaches and the conservation of the dune shape through the integration of the data sets despite the highly dynamic fluvio-marine environments.

A three-dimensional large eddy simulation model is used to simulate the turbulent flow dynamics around a circular pier in live-bed and clear-water scour conditions. The Navier–Stokes equations are transformed into a σ-coordinate system and solved using a second-order unstructured triangular finite-volume method. We simulate the bed evolution by solving the Exner-Polya equation assisted by a sand-slide model as a correction method. The bedload transport rate is based on the model of Engelund and Fredsœ. The model was validated for live-bed conditions in a wide channel and clear-water conditions in a narrow channel against the experimental data found in the literature. The in-house model NSMP3D can successfully produce both the live-bed and clear-water scouring throughout a stable long-term simulation. The flow model was used to study the effects of the blockage ratio in the flow near the pier in clear-water conditions, particularly the contraction effect at the zone where the scour hole starts to form. The scour depth in the clear water simulations is generally deeper than the live-bed simulations. In clear-water, the results show that the present model is able to qualitatively and quantitatively capture the hydrodynamic and morphodynamic processes near the bed. In comparison to the wide channel situation, the simulations indicate that the scour rate is faster in the narrow channel case.

This paper presents experimental and numerical studies on the erosion of a horizontal granular bed by a two-dimensional plane vertical impinging jet to predict the eroded craters’ size scaling (depth and width). The simulations help understand the microscopic processes that govern erosion in this complex flow. A modified jet-bed distance, accounting for the plane jet virtual origin, is successfully used to obtain a unique relationship between the crater size and a local Shields parameter. This work develops a two-phase flow numerical model to reproduce the experimental results. The numerical techniques are based on a finite volume formulation to approximate spatial derivatives, a projection technique to calculate the pressure and velocity for each phase, and a staggered grid to avoid spurious oscillations. Different options for the sediment’s solid-to-liquid transition during erosion are proposed, tested, and discussed. One model is based on unified equations of continuum mechanics, others on modified closure equations for viscosity or momentum transfer. A good agreement between the numerical solutions and the experimental measurements is obtained.

Every year, in the Vietnam Mekong Delta Coastal Zone (VMDCZ), erosions cause approximately 300 ha of agricultural land loss. Therefore, measures for shoreline protection are urgently needed. This paper discusses the impacts of protection measures in the Go-Cong Coastal Zone to prevent erosion/accretion processes, predicted by two numerical models, MIKE21-FM and TELEMAC-2D. Hard and soft measures have been proposed using breakwaters and sandbars, respectively. The simulations show that the erosion/accretion trends provided by both models are similar. For breakwaters, MIKE21-FM provides less accretion than TELEMAC-2D in areas extending over 300 m and 500 m from shorelines. However, for sandbars, MIKE21-FM shows higher accretion within areas extending over 500 m but less than 300 m. Sandbars cause higher accretion in a larger area, extending over 1000 m offshore. The simulation results allow us to propose two alternative measures: (1) a row of several breakwater units will be implanted at 300 m offshore. The length of each unit is 600 m, with a gap between two neighbouring units of 70 m and a crest elevation of 2.2 m above mean sea level (MSL). (2) A row of sandbar units will be posed at 500 m offshore, with a unit length of 1000 m and a gap between the two neighbouring units of 200 m. The crest elevation is fixed at MSL.

Non-staggered triangular grids have many advantages in performing river or ocean modeling with the finite-volume method. However, horizontal divergence errors may occur, especially in large-scale hydrostatic calculations with centrifugal acceleration. This paper proposes an unstructured finite-volume method with a filtered scheme to mitigate the divergence noise and avoid further influencing the velocities and water elevation. In hydrostatic pressure calculations, we apply the proposed method to three-dimensional curved channel flows. Approximations reduce the numerical errors after filtering the horizontal divergence operator, and the approximation is second-order accurate. Numerical results for the channel flow accurately calculate the velocity profile and surface elevation at different Froude numbers. Moreover, secondary flow features such as the vortex pattern and its movement along the channel sections are also well captured.

Munitions or Unexploded Ordnance (UXO) are ammunitions belonging to a larger family of explosives from past military activities. Sea disposal of munitions was a common practice from the late 1800s to 1970 when international conventions put an end to the practice. The exact quantity of munitions dumped into the Oceans globally is unknown due to sparse documentation but conservative estimates of known records stand at 1.6 million tons (Wilkinson, 2017). After decades underwater, some munitions have resurfaced in the nearshore, presumably washed onshore or exhumed by high-energy wave action. Extreme events could be major causes of migration and exposure of UXO in the nearshore. The quantification of variable density munitions behavior in the swash zone remains poorly understood. Biofouling, encrustation, and corrosion can alter the density of the underwater munitions, which consequently impacts the behavior of the munitions in the swash zone. Hence, this experimental study aimed to quantify the behavior of variable density munitions in the swash zone under dam-break scenarios. The findings of the study create more insights into the behavior of variable density munitions in the swash zone and can also serve as validation data for probabilistic models on munitions behavior in the swash zone under extreme events.

The numerical modeling of sediment transport under wave impact is challenging because of the complex nature of the triple wave–structure–sediment interaction. This study presents three-dimensional numerical modeling of sediment scouring due to non-breaking wave impact on a vertical seawall. The Navier–Stokes–Exner equations are approximated to calculate the full evolution of flow fields and morphodynamic responses. The bed erosion model is based on the van Rijn formulation with a mass-conservative sand-slide algorithm. The numerical solution is obtained by using a projection method and a fully implicit second-order unstructured finite-volume method in a σ-coordinate computational domain. This coordinate system is employed to accurately represent the free-surface elevation and sediment/water interface evolution. Experimental results of the velocity field, surface wave motion, and scour hole formation hole are used to compare and demonstrate the proposed numerical method’s capabilities to model the seawall scour.

Nature-based Solutions (NbS) for coastal protection have been widely recognized as sustainable, economical, and eco-friendly alternatives to conventional grey structures, particularly under the threat of climate change (Temmerman et al., 2013). Living shorelines are a form of NbS, which incorporate natural elements (such as saltmarshes) that provide flood and erosion risk management benefits. Climate change impacts, such as rising sea levels and reducing sea-ice cover (Savard et al., 2016), are increasingly motivating communities in Canada to consider incorporating living shorelines in coastal protection schemes. The efficacy of wave energy dissipation by vegetation depends on both hydrodynamic conditions and plant characteristics. However, plant parameters, such as standing biomass exhibit seasonal fluctuations, leading to corresponding variations in attenuation capacity (Schulze et al., 2019). Hence, the design of NbS utilizing saltmarsh vegetation must account for seasonal variations to ensure sustained efficacy, especially within the context of Canadian regional climates, which are typically characterized by extended, stormy winters and shorter summer seasons. Few studies have quantified wave attenuation by real saltmarsh vegetation in large-scale laboratory facilities (Möller et al., 2014; Maza et al., 2015; Ghodoosipour et al., 2022), particularly for species native to the east coast of Canada. There is a knowledge gap on how seasonality affects wave attenuation by saltmarsh vegetation and how attenuation varies from the lower marsh to the higher marsh depending on species-specific plant traits. Research is needed to bridge this gap and develop technical guidance for the design of performant living shorelines in Canada.

Nature-based solutions (NbS) for coastal protection has recently gained increased attention worldwide as a sustainable, economical and eco-friendly alternative to conventional grey structures, particularly under the threat of climate change (Temmerman et al. 2013). Wave energy dissipation by vegetation can be parameterized by the total horizontal force acting on the plant; expressed using a Morison-type equation considering only the form drag component (Dalrymple et al. 1984). Modelling wave-vegetation interaction is challenging in a laboratory environment (Lara et al. 2016) and it is difficult to accomplish a realistic representation of a plant’s biomechanical behavior and geometry using plant mimics or surrogates. Few studies have modelled real saltmarsh vegetation in large scale laboratory facilities (Moller et al. 2014; Maza et al. 2015) and quantified wave attenuation, particularly for engineered living shorelines (Maryland DoE, 2013). Further research is needed, particularly in the Canadian context, to investigate the capacity of different saltmarsh species to effectively attenuate waves and wave runup under storm conditions, to examine the plant’s drag coefficient and to bridge the gap to develop technical design specifications for the detailed design of living shorelines.

Scour is a hydraulic risk threatening the stability of bridges in fluvial and coastal areas. Therefore, developing permanent and real-time monitoring techniques is crucial. Recent advances in strain measurements using fiber optic sensors allow new opportunities for scour monitoring. In this study, the innovative optical frequency domain reflectometry (OFDR) was used to evaluate the effect of scour by performing distributed strain measurements along a rod under static lateral loads. An analytical analysis based on the Winkler model of the soil was carefully established and used to evaluate the accuracy of the fiber optic sensors and helped interpret the measurements results. Dynamic tests were also performed and results from static and dynamic tests were compared using an equivalent cantilever model.

Local scour is the removal of soil around bridge foundations under the erosive action of flowing water. This hydraulic risk has raised awareness of the need for developing continuous monitoring techniques to estimate scour depth around bridge piers and abutments. One of the emerging techniques is based on monitoring the vibration frequency of either bridge piers or a driven sensor in the riverbed. The sensor proposed in this study falls into the second category. Some unresolved issues are investigated: the effect of the geometry and material of the sensor, the effect of the embedded length and the effect of soil type. To this end, extensive laboratory tests are performed using rods of different materials, with various geometries and lengths. These tests are conducted in both dry sand and a soft clayey soil. Since the sensor will be placed in the riverbed, it is crucial to evaluate the effect of immersed conditions on its response. A numerical 3D finite-element model was developed and compared against experimental data. This model was then used to compute the ‘wet’ frequencies of the sensor. Finally, based on both the experimental and numerical results, an equivalent cantilever model is proposed to correlate the variation of the frequency of the sensor to the scour depth.

Abstract Rivers typically present heterogeneous bed material, but the effects of sediment nonuniformity on river bar characteristics are still unclear. This work investigates the impact of sediment size heterogeneity on alternate bars with a morphodynamic numerical model. The model is first used to reproduce a laboratory experiment showing alternate bar formation with nonuniform bed material. Subsequently, the influence of sediment size heterogeneity on alternate bars is investigated distinguishing hybrid from free bars, definition based on the presence/absence of morphodynamic forcing, considering the results of nine scenarios. In four of them, a transverse obstacle is used to generate forcing. The computations are carried out with the Telemac‐Mascaret system solving the two‐dimensional shallow‐water equations with a finite element approach, accounting for horizontal and vertical sediment sorting processes. The results show that sediment heterogeneity affects free migrating and hybrid bars in a different way. The difference lies in the presence/absence of a migration front, so that distinct relations between bed topography, bed shear stress, and sediment sorting are obtained. Sediment sorting and associated planform redistribution of bed roughness only slightly modify free migrating bar morphodynamics, whereas hybrid bars are greatly impacted, with decreased amplitude and increased wavelength. Increased sediment size heterogeneity increases the degree of sediment sorting, while the sorting pattern remains the same for both free and hybrid bars. Moreover, it produces averagely higher, longer, and faster free bars, while in the case of hybrid bars their wavelength is increased but no general trend can be determined for their amplitude. , Key Points Free bars and hybrid bars show distinct topography, bed shear stress, sediment transport, and sediment sorting patterns Increased sediment heterogeneity induces longer free/hybrid bars, higher free bars but no general trend for the hybrid bar amplitude Sediment sorting does not impact the averaged free bar characteristics, while hybrid bars become longer and damped