UQAM logo
Page d'accueil de l'UQAM Étudier à l'UQAM Bottin du personnel Carte du campus Bibliothèques Pour nous joindre

Service des bibliothèques

Veille bibliographique sur les inondations
UQAM logo
Veille bibliographique sur les inondations
  • Bibliography
  1. Vitrine des bibliographies
  2. Veille bibliographique sur les inondations
  3. Résultats
Veille bibliographique sur les inondationsVeille bibliographique sur les inondations
  • Bibliography

Votre recherche

Réinitialiser la recherche

Aide

L’interface de recherche est composée de trois sections : Rechercher, Explorer et Résultats. Celles-ci sont décrites en détail ci-dessous.

Vous pouvez lancer une recherche aussi bien à partir de la section Rechercher qu’à partir de la section Explorer.

Rechercher

Cette section affiche vos critères de recherche courants et vous permet de soumettre des mots-clés à chercher dans la bibliographie.

  • Chaque nouvelle soumission ajoute les mots-clés saisis à la liste des critères de recherche.
  • Pour lancer une nouvelle recherche plutôt qu’ajouter des mots-clés à la recherche courante, utilisez le bouton Réinitialiser la recherche, puis entrez vos mots-clés.
  • Pour remplacer un mot-clé déjà soumis, veuillez d’abord le retirer en décochant sa case à cocher, puis soumettre un nouveau mot-clé.
  • Vous pouvez contrôler la portée de votre recherche en choisissant où chercher. Les options sont :
    • Partout : repère vos mots-clés dans tous les champs des références bibliographiques ainsi que dans le contenu textuel des documents disponibles.
    • Dans les auteurs ou contributeurs : repère vos mots-clés dans les noms d’auteurs ou de contributeurs.
    • Dans les titres : repère vos mots-clés dans les titres.
    • Dans les années de publication : repère vos mots-clés dans le champ d’année de publication (vous pouvez utiliser l’opérateur OU avec vos mots-clés pour trouver des références ayant différentes années de publication. Par exemple, 2020 OU 2021).
    • Dans tous les champs : repère vos mots-clés dans tous les champs des notices bibliographiques.
    • Dans les documents : repère vos mots-clés dans le contenu textuel des documents disponibles.
  • Vous pouvez utiliser les opérateurs booléens avec vos mots-clés :
    • ET : repère les références qui contiennent tous les termes fournis. Ceci est la relation par défaut entre les termes séparés d’un espace. Par exemple, a b est équivalent à a ET b.
    • OU : repère les références qui contiennent n’importe lequel des termes fournis. Par exemple, a OU b.
    • SAUF : exclut les références qui contiennent le terme fourni. Par exemple, SAUF a.
    • Les opérateurs booléens doivent être saisis en MAJUSCULES.
  • Vous pouvez faire des groupements logiques (avec les parenthèses) pour éviter les ambiguïtés lors de la combinaison de plusieurs opérateurs booléens. Par exemple, (a OU b) ET c.
  • Vous pouvez demander une séquence exacte de mots (avec les guillemets droits), par exemple "a b c". Par défaut la différence entre les positions des mots est de 1, ce qui signifie qu’une référence sera repérée si elle contient les mots et qu’ils sont consécutifs. Une distance maximale différente peut être fournie (avec le tilde), par exemple "a b"~2 permet jusqu’à un terme entre a et b, ce qui signifie que la séquence a c b pourrait être repérée aussi bien que a b.
  • Vous pouvez préciser que certains termes sont plus importants que d’autres (avec l’accent circonflexe). Par exemple, a^2 b c^0.5 indique que a est deux fois plus important que b dans le calcul de pertinence des résultats, tandis que c est de moitié moins important. Ce type de facteur peut être appliqué à un groupement logique, par exemple (a b)^3 c.
  • La recherche par mots-clés est insensible à la casse et les accents et la ponctuation sont ignorés.
  • Les terminaisons des mots sont amputées pour la plupart des champs, tels le titre, le résumé et les notes. L’amputation des terminaisons vous évite d’avoir à prévoir toutes les formes possibles d’un mot dans vos recherches. Ainsi, les termes municipal, municipale et municipaux, par exemple, donneront tous le même résultat. L’amputation des terminaisons n’est pas appliquée au texte des champs de noms, tels auteurs/contributeurs, éditeur, publication.

Explorer

Cette section vous permet d’explorer les catégories associées aux références.

  • Les catégories peuvent servir à affiner votre recherche. Cochez une catégorie pour l’ajouter à vos critères de recherche. Les résultats seront alors restreints aux références qui sont associées à cette catégorie.
  • Dé-cochez une catégorie pour la retirer de vos critères de recherche et élargir votre recherche.
  • Les nombres affichés à côté des catégories indiquent combien de références sont associées à chaque catégorie considérant les résultats de recherche courants. Ces nombres varieront en fonction de vos critères de recherche, de manière à toujours décrire le jeu de résultats courant. De même, des catégories et des facettes entières pourront disparaître lorsque les résultats de recherche ne contiennent aucune référence leur étant associées.
  • Une icône de flèche () apparaissant à côté d’une catégorie indique que des sous-catégories sont disponibles. Vous pouvez appuyer sur l’icône pour faire afficher la liste de ces catégories plus spécifiques. Par la suite, vous pouvez appuyer à nouveau pour masquer la liste. L’action d’afficher ou de masquer les sous-catégories ne modifie pas vos critères de recherche; ceci vous permet de rapidement explorer l’arborescence des catégories, si désiré.

Résultats

Cette section présente les résultats de recherche. Si aucun critère de recherche n’a été fourni, elle montre toute la bibliographie (jusqu’à 20 références par page).

  • Chaque référence de la liste des résultats est un hyperlien vers sa notice bibliographique complète. À partir de la notice, vous pouvez continuer à explorer les résultats de recherche en naviguant vers les notices précédentes ou suivantes de vos résultats de recherche, ou encore retourner à la liste des résultats.
  • Des hyperliens supplémentaires, tels que Consulter le document ou Consulter sur [nom d’un site web], peuvent apparaître sous un résultat de recherche. Ces liens vous fournissent un accès rapide à la ressource, des liens que vous trouverez également dans la notice bibliographique.
  • Le bouton Résumés vous permet d’activer ou de désactiver l’affichage des résumés dans la liste des résultats de recherche. Toutefois, activer l’affichage des résumés n’aura aucun effet sur les résultats pour lesquels aucun résumé n’est disponible.
  • Diverses options sont fournies pour permettre de contrôler l’ordonnancement les résultats de recherche. L’une d’elles est l’option de tri par Pertinence, qui classe les résultats du plus pertinent au moins pertinent. Le score utilisé à cette fin prend en compte la fréquence des mots ainsi que les champs dans lesquels ils apparaissent. Par exemple, si un terme recherché apparaît fréquemment dans une référence ou est l’un d’un très petit nombre de termes utilisé dans cette référence, cette référence aura probablement un score plus élevé qu’une autre où le terme apparaît moins fréquemment ou qui contient un très grand nombre de mots. De même, le score sera plus élevé si un terme est rare dans l’ensemble de la bibliographie que s’il est très commun. De plus, si un terme de recherche apparaît par exemple dans le titre d’une référence, le score de cette référence sera plus élevé que s’il apparaissait dans un champ moins important tel le résumé.
  • Le tri par Pertinence n’est disponible qu’après avoir soumis des mots-clés par le biais de la section Rechercher.
  • Les catégories sélectionnées dans la section Explorer n’ont aucun effet sur le tri par pertinence. Elles ne font que filtrer la liste des résultats.
Membres du RIISQ
  • Rousseau, Alain
Année de publication
  • Entre 2000 et 2025
    • Entre 2020 et 2025

Résultats 14 ressources

Recently addedDate décroissanteDate croissanteAuteur A-ZAuteur Z-ATitre A-ZTitre Z-A
Résumés
  • Gumiere, S. J., Camporese, M., Botto, A., Lafond, J. A., Paniconi, C., Gallichand, J., & Rousseau, A. N. (2020). Machine Learning vs. Physics-Based Modeling for Real-Time Irrigation Management. Frontiers in Water, 2, 8. https://doi.org/10.3389/frwa.2020.00008
    Consulter sur www.frontiersin.org
  • Isabelle, P.-E., Nadeau, D. F., Anctil, F., Rousseau, A. N., Jutras, S., & Music, B. (2020). Impacts of high precipitation on the energy and water budgets of a humid boreal forest. Agricultural and Forest Meteorology, 280. https://doi.org/10.1016/j.agrformet.2019.107813
    Consulter sur linkinghub.elsevier.com
  • Wu, Y., Zhang, G., & Rousseau, A. N. (2020). Quantitative assessment on basin-scale hydrological services of wetlands. Science China Earth Sciences, 63(2), 279–291. https://doi.org/10.1007/s11430-018-9372-9
    Consulter sur link.springer.com
  • Wu, Y., Zhang, G., Rousseau, A. N., & Xu, Y. J. (2020). Quantifying streamflow regulation services of wetlands with an emphasis on quickflow and baseflow responses in the Upper Nenjiang River Basin, Northeast China. Journal of Hydrology, 583, 124565. https://doi.org/10.1016/j.jhydrol.2020.124565
    Consulter sur linkinghub.elsevier.com
  • Augas, J., Foulon, E., Rousseau, A. N., & Baraër, M. (2024). Extension of a Monolayer Energy-Budget Degree-Day Model to a Multilayer One. Water, 16(8), 1089. https://doi.org/10.3390/w16081089

    This paper presents the extension of the monolayer snow model of a semi-distributed hydrological model (HYDROTEL) to a multilayer model that considers snow to be a combination of ice and air, while accounting for freezing rain. For two stations in Yukon and one station in northern Quebec, Canada, the multilayer model achieves high performances during calibration periods yet similar to the those of the monolayer model, with KGEs of up to 0.9. However, it increases the KGE values by up to 0.2 during the validation periods. The multilayer model provides more accurate estimations of maximum SWE and total spring snowmelt dates. This is due to its increased sensitivity to thermal atmospheric conditions. Although the multilayer model improves the estimation of snow heights overall, it exhibits excessive snow densities during spring snowmelt. Future research should aim to refine the representation of snow densities to enhance the accuracy of the multilayer model. Nevertheless, this model has the potential to improve the simulation of spring snowmelt, addressing a common limitation of the monolayer model.

    Consulter sur www.mdpi.com
  • Gordon, C. A., Foulon, E., & Rousseau, A. N. (2023). Deriving synthetic rating curves from a digital elevation model to delineate the inundated areas of small watersheds. Journal of Hydrology: Regional Studies, 50, 101580. https://doi.org/10.1016/j.ejrh.2023.101580
    Consulter sur linkinghub.elsevier.com
  • Augas, J., Abbasnezhadi, K., Rousseau, A. N., & Baraer, M. (2020). What is the Trade-Off between Snowpack Stratification and Simulated Snow Water Equivalent in a Physically-Based Snow Model? Water, 12(12), 3449. https://doi.org/10.3390/w12123449

    In Nordic watersheds, estimation of the dynamics of snow water equivalent (SWE) represents a major step toward a satisfactory modeling of the annual hydrograph. For a multilayer, physically-based snow model like MASiN (Modèle Autonome de Simulation de la Neige), the number of modeled snow layers can affect the accuracy of the simulated SWE. The objective of this study was to identify the maximum number of snow layers (MNSL) that would define the trade-off between snowpack stratification and SWE modeling accuracy. Results indicated that decreasing the MNSL reduced the SWE modeling accuracy since the thermal energy balance and the mass balance were less accurately resolved by the model. Nevertheless, from a performance standpoint, SWE modeling can be accurate enough with a MNSL of two (2), with a substantial performance drop for a MNSL value of around nine (9). Additionally, the linear correlation between the values of the calibrated parameters and the MNSL indicated that reducing the latter in MASiN increased the fresh snow density and the settlement coefficient, while the maximum radiation coefficient decreased. In this case, MASiN favored the melting process, and thus the homogenization of snow layers occurred from the top layers of the snowpack in the modeling algorithm.

    Consulter sur www.mdpi.com
  • Abbasnezhadi, K., & Rousseau, A. N. (2020). Can assimilating snow monitoring information offset the adverse effects of precipitation data scarcity in hydrological modelling applications? https://doi.org/10.5194/egusphere-egu2020-11428

    <p>The applicability of the Canadian Precipitation Analysis products known as the Regional Deterministic Precipitation Analysis (CaPA-RDPA) for hydrological modelling in boreal watersheds in Canada, which are constrained with shortage of precipitation information, has been the subject of a number of recent studies. The northern and mid-cordilleran alpine, sub-alpine, and boreal watersheds in Yukon, Canada, are prime examples of such Nordic regions where any hydrological modelling application is greatly scrambled due to lack of accurate precipitation information. In the course of the past few years, proper advancements were tailored to resolve these challenges and a forecasting system was designed at the operational level for short- to medium-range flow and inflow forecasting in major watersheds of interest to Yukon Energy. This forecasting system merges the precipitation products from the North American Ensemble forecasting System (NAEFS) and recorded flows or reconstructed reservoir inflows into the HYDROTEL distributed hydrological model, using the Ensemble Kalman Filtering (EnKF) data assimilation technique. In order to alleviate the adverse effects of scarce precipitation information, the forecasting system also enjoys a snow data assimilation routine in which simulated snowpack water content is updated through a distributed snow correction scheme. Together, both data assimilation schemes offer the system with a framework to accurately estimate flow magnitudes. This robust system not only mitigates the adverse effects of meteorological data constrains in Yukon, but also offers an opportunity to investigate the hydrological footprint of CaPA-RDPA products in Yukon, which is exactly the motivation behind this presentation. However, our overall goal is much more comprehensive as we are trying to elucidate whether assimilating snow monitoring information in a distributed hydrological model could meet the flow estimation accuracy in sparsely gauged basins to the same extent that would be achieved through either (i) the application of precipitation analysis products, or (ii) expanding the meteorological network. A proper answer to this question would provide us with valuable information with respect to the robustness of the snow data assimilation routine in HYDROTEL and the intrinsic added-value of using CaPA-RDPA products in sparsely gauged basins of Yukon.</p>

    Consulter sur meetingorganizer.copernicus.org
  • Sui, Y., Ou, Y., Yan, B., Rousseau, A. N., Fang, Y., Geng, R., Wang, L., & Ye, N. (2020). A dual isotopic framework for identifying nitrate sources in surface runoff in a small agricultural watershed, northeast China. Journal of Cleaner Production, 246. https://doi.org/10.1016/j.jclepro.2019.119074
    Consulter sur linkinghub.elsevier.com
  • Wu, Y., Sun, J., Hu, B., Xu, Y. J., Rousseau, A. N., & Zhang, G. (2023). Can the combining of wetlands with reservoir operation reduce the risk of future floods and droughts? Hydrology and Earth System Sciences, 27(14). https://doi.org/10.5194/hess-27-2725-2023

    Wetlands and reservoirs are important water flow and storage regulators in a river basin; therefore, they can play a crucial role in mitigating flood and hydrological drought risks. Despite the advancement of river basin theory and modeling, our knowledge is still limited about the extent to which these two regulators could perform such a role, especially under future climate extremes. To improve our understanding, we first coupled wetlands and reservoir operations into a semi-spatially explicit hydrological model and then applied it in a case study involving a large river basin in northeast China. The projection of future floods and hydrological droughts was performed using the hydrological model during different periods (near future: 2026–2050, middle century: 2051–2075, and end century: 2076–2100) under five future climate change scenarios. We found that the risk of future floods and hydrological droughts can vary across different periods – in particular, it will experience relatively large increases and slight decreases. This large river basin will experience flood events of longer duration, with larger peak flows and volume, and of enhanced flashiness compared to the historical period. Simultaneously, the hydrological droughts will be much more frequent, with longer durations and more serious deficits. Therefore, the risk of floods and droughts will, overall, increase further under future climate change even under the combined influence of reservoirs and wetlands. These findings highlight the hydrological regulation function of wetlands and reservoirs and attest that the combining of wetlands with reservoir operation cannot fully eliminate the increasing future flood and drought risks. To improve a river basin's resilience to the risks of future climate change, we argue that the implementation of wetland restoration and the development of accurate forecasting systems for effective reservoir operation are of great importance. Furthermore, this study demonstrated a wetland–reservoir integrated modeling and assessment framework that is conducive to risk assessment of floods and hydrological droughts and that can be used for other river basins in the world.

    Consulter sur hess.copernicus.org
  • Goyette, J.-O., Savary, S., Blanchette, M., Rousseau, A. N., Pellerin, S., & Poulin, M. (2023). Setting Targets for Wetland Restoration to Mitigate Climate Change Effects on Watershed Hydrology. Environmental Management, 71(2). https://doi.org/10.1007/s00267-022-01763-z
    Consulter sur link.springer.com
  • Wu, Y., Sun, J., Blanchette, M., Rousseau, A. N., Xu, Y. J., Hu, B., & Zhang, G. (2023). Wetland mitigation functions on hydrological droughts: From drought characteristics to propagation of meteorological droughts to hydrological droughts. Journal of Hydrology, 617. https://doi.org/10.1016/j.jhydrol.2022.128971
    Consulter sur linkinghub.elsevier.com
  • Blanchette, M., Rousseau, A. N., Savary, S., & Foulon, É. (2022). Are spatial distribution and aggregation of wetlands reliable indicators of stream flow mitigation? Journal of Hydrology, 608. https://doi.org/10.1016/j.jhydrol.2022.127646
    Consulter sur linkinghub.elsevier.com
  • Wu, Y., Sun, J., Hu, B., Zhang, G., & Rousseau, A. N. (2023). Wetland-based solutions against extreme flood and severe drought: Efficiency evaluation of risk mitigation. Climate Risk Management, 40. https://doi.org/10.1016/j.crm.2023.100505
    Consulter sur linkinghub.elsevier.com
RIS

Format recommandé pour la plupart des logiciels de gestion de références bibliographiques

BibTeX

Format recommandé pour les logiciels spécialement conçus pour BibTeX

Flux web personnalisé
Dernière mise à jour depuis la base de données : 2025-06-13 06 h 30 (UTC)

Explorer

Axes du RIISQ

  • 5 - aide à la décision, à l’adaptation et à la résilience (1)

Enjeux majeurs

  • Risques systémiques (4)

Membres du RIISQ

  • Rousseau, Alain
  • Baraer, Michael (2)

Secteurs et disciplines

  • Nature et Technologie (1)
  • Société et Culture (1)

Types d'événements extrêmes

  • Évènements liés au froid (neige, glace) (4)
  • Sécheresses et canicules (3)
  • Inondations et crues (2)

Type de ressource

  • Article de revue (13)
  • Rapport (1)

Année de publication

  • Entre 2000 et 2025
    • Entre 2020 et 2025
      • 2020 (7)
      • 2022 (1)
      • 2023 (5)
      • 2024 (1)

Langue de la ressource

  • Anglais (12)

Explorer

UQAM - Université du Québec à Montréal

  • Veille bibliographique sur les inondations
  • bibliotheques@uqam.ca

Accessibilité Web