UQAM logo
Page d'accueil de l'UQAM Étudier à l'UQAM Bottin du personnel Carte du campus Bibliothèques Pour nous joindre

Service des bibliothèques

Veille bibliographique sur les inondations
UQAM logo
Veille bibliographique sur les inondations
  • Bibliography
  1. Vitrine des bibliographies
  2. Veille bibliographique sur les inondations
  3. Résultats
Veille bibliographique sur les inondationsVeille bibliographique sur les inondations
  • Bibliography

Votre recherche

Réinitialiser la recherche

Aide

L’interface de recherche est composée de trois sections : Rechercher, Explorer et Résultats. Celles-ci sont décrites en détail ci-dessous.

Vous pouvez lancer une recherche aussi bien à partir de la section Rechercher qu’à partir de la section Explorer.

Rechercher

Cette section affiche vos critères de recherche courants et vous permet de soumettre des mots-clés à chercher dans la bibliographie.

  • Chaque nouvelle soumission ajoute les mots-clés saisis à la liste des critères de recherche.
  • Pour lancer une nouvelle recherche plutôt qu’ajouter des mots-clés à la recherche courante, utilisez le bouton Réinitialiser la recherche, puis entrez vos mots-clés.
  • Pour remplacer un mot-clé déjà soumis, veuillez d’abord le retirer en décochant sa case à cocher, puis soumettre un nouveau mot-clé.
  • Vous pouvez contrôler la portée de votre recherche en choisissant où chercher. Les options sont :
    • Partout : repère vos mots-clés dans tous les champs des références bibliographiques ainsi que dans le contenu textuel des documents disponibles.
    • Dans les auteurs ou contributeurs : repère vos mots-clés dans les noms d’auteurs ou de contributeurs.
    • Dans les titres : repère vos mots-clés dans les titres.
    • Dans les années de publication : repère vos mots-clés dans le champ d’année de publication (vous pouvez utiliser l’opérateur OU avec vos mots-clés pour trouver des références ayant différentes années de publication. Par exemple, 2020 OU 2021).
    • Dans tous les champs : repère vos mots-clés dans tous les champs des notices bibliographiques.
    • Dans les documents : repère vos mots-clés dans le contenu textuel des documents disponibles.
  • Vous pouvez utiliser les opérateurs booléens avec vos mots-clés :
    • ET : repère les références qui contiennent tous les termes fournis. Ceci est la relation par défaut entre les termes séparés d’un espace. Par exemple, a b est équivalent à a ET b.
    • OU : repère les références qui contiennent n’importe lequel des termes fournis. Par exemple, a OU b.
    • SAUF : exclut les références qui contiennent le terme fourni. Par exemple, SAUF a.
    • Les opérateurs booléens doivent être saisis en MAJUSCULES.
  • Vous pouvez faire des groupements logiques (avec les parenthèses) pour éviter les ambiguïtés lors de la combinaison de plusieurs opérateurs booléens. Par exemple, (a OU b) ET c.
  • Vous pouvez demander une séquence exacte de mots (avec les guillemets droits), par exemple "a b c". Par défaut la différence entre les positions des mots est de 1, ce qui signifie qu’une référence sera repérée si elle contient les mots et qu’ils sont consécutifs. Une distance maximale différente peut être fournie (avec le tilde), par exemple "a b"~2 permet jusqu’à un terme entre a et b, ce qui signifie que la séquence a c b pourrait être repérée aussi bien que a b.
  • Vous pouvez préciser que certains termes sont plus importants que d’autres (avec l’accent circonflexe). Par exemple, a^2 b c^0.5 indique que a est deux fois plus important que b dans le calcul de pertinence des résultats, tandis que c est de moitié moins important. Ce type de facteur peut être appliqué à un groupement logique, par exemple (a b)^3 c.
  • La recherche par mots-clés est insensible à la casse et les accents et la ponctuation sont ignorés.
  • Les terminaisons des mots sont amputées pour la plupart des champs, tels le titre, le résumé et les notes. L’amputation des terminaisons vous évite d’avoir à prévoir toutes les formes possibles d’un mot dans vos recherches. Ainsi, les termes municipal, municipale et municipaux, par exemple, donneront tous le même résultat. L’amputation des terminaisons n’est pas appliquée au texte des champs de noms, tels auteurs/contributeurs, éditeur, publication.

Explorer

Cette section vous permet d’explorer les catégories associées aux références.

  • Les catégories peuvent servir à affiner votre recherche. Cochez une catégorie pour l’ajouter à vos critères de recherche. Les résultats seront alors restreints aux références qui sont associées à cette catégorie.
  • Dé-cochez une catégorie pour la retirer de vos critères de recherche et élargir votre recherche.
  • Les nombres affichés à côté des catégories indiquent combien de références sont associées à chaque catégorie considérant les résultats de recherche courants. Ces nombres varieront en fonction de vos critères de recherche, de manière à toujours décrire le jeu de résultats courant. De même, des catégories et des facettes entières pourront disparaître lorsque les résultats de recherche ne contiennent aucune référence leur étant associées.
  • Une icône de flèche () apparaissant à côté d’une catégorie indique que des sous-catégories sont disponibles. Vous pouvez appuyer sur l’icône pour faire afficher la liste de ces catégories plus spécifiques. Par la suite, vous pouvez appuyer à nouveau pour masquer la liste. L’action d’afficher ou de masquer les sous-catégories ne modifie pas vos critères de recherche; ceci vous permet de rapidement explorer l’arborescence des catégories, si désiré.

Résultats

Cette section présente les résultats de recherche. Si aucun critère de recherche n’a été fourni, elle montre toute la bibliographie (jusqu’à 20 références par page).

  • Chaque référence de la liste des résultats est un hyperlien vers sa notice bibliographique complète. À partir de la notice, vous pouvez continuer à explorer les résultats de recherche en naviguant vers les notices précédentes ou suivantes de vos résultats de recherche, ou encore retourner à la liste des résultats.
  • Des hyperliens supplémentaires, tels que Consulter le document ou Consulter sur [nom d’un site web], peuvent apparaître sous un résultat de recherche. Ces liens vous fournissent un accès rapide à la ressource, des liens que vous trouverez également dans la notice bibliographique.
  • Le bouton Résumés vous permet d’activer ou de désactiver l’affichage des résumés dans la liste des résultats de recherche. Toutefois, activer l’affichage des résumés n’aura aucun effet sur les résultats pour lesquels aucun résumé n’est disponible.
  • Diverses options sont fournies pour permettre de contrôler l’ordonnancement les résultats de recherche. L’une d’elles est l’option de tri par Pertinence, qui classe les résultats du plus pertinent au moins pertinent. Le score utilisé à cette fin prend en compte la fréquence des mots ainsi que les champs dans lesquels ils apparaissent. Par exemple, si un terme recherché apparaît fréquemment dans une référence ou est l’un d’un très petit nombre de termes utilisé dans cette référence, cette référence aura probablement un score plus élevé qu’une autre où le terme apparaît moins fréquemment ou qui contient un très grand nombre de mots. De même, le score sera plus élevé si un terme est rare dans l’ensemble de la bibliographie que s’il est très commun. De plus, si un terme de recherche apparaît par exemple dans le titre d’une référence, le score de cette référence sera plus élevé que s’il apparaissait dans un champ moins important tel le résumé.
  • Le tri par Pertinence n’est disponible qu’après avoir soumis des mots-clés par le biais de la section Rechercher.
  • Les catégories sélectionnées dans la section Explorer n’ont aucun effet sur le tri par pertinence. Elles ne font que filtrer la liste des résultats.
Dans les auteurs ou contributeurs
  • "Ouarda, Taha B. M. J."
Enjeux majeurs
  • Inégalités et événements extrêmes

Résultats 6 ressources

PertinenceRecently addedDate décroissanteDate croissanteAuteur A-ZAuteur Z-ATitre A-ZTitre Z-A
Résumés
  • Lee, T., & Ouarda, T. B. M. J. (2025). Climate teleconnection-driven stochastic simulation for future water-related risk management. Journal of Hydrology, 662, 133834. https://doi.org/10.1016/j.jhydrol.2025.133834

    Water risk management has been adversely affected by climate variations, including recent climate change. Climate variations have highly impacted the hydrological cycles in the atmosphere and biosphere, and their impact can be defined with the teleconnection between climate signals and hydrological variables. Water managers should practice future risk management to mitigate risks, including the impact of teleconnection, and stochastically simulated scenarios can be employed as an effective tool to take advantage of water management preparation. A stochastic simulation model for hydrological variables teleconnected with climate signals is very useful for water managers. Therefore, the objective of the current study was to develop a novel stochastic simulation model for the simulation of synthetic series teleconnected with climate signals. By jointly decomposing the hydrological variables and a climate signal with bivariate empirical mode decomposition (BEMD), the bivariate nonstationary oscillation resampling (B-NSOR) model was applied to the significant components. The remaining components were simulated with the newly developed method of climate signal-led K-nearest neighbor-based local linear regression (CKLR). This entire approach is referred to as the climate signal-led hydrologic stochastic simulation (CSHS) model. The key statistics were estimated from the 200 simulated series and compared with the observed data, and the results showed that the CSHS model could reproduce the key statistics including extremes while the SML model showed slight underestimation in the skewness and maximum values. Additionally, the observed long-term variability of hydrological variables was reproduced well with the CSHS model by analyzing drought statistics. Moreover, the Hurst coefficient with slightly higher than 0.8 was fairly preserved by the CSHS model while the SML model is underestimated as 0.75. The overall results demonstrate that the proposed CSHS model outperformed the existing shifting mean level (SML) model, which has been used to simulate hydroclimatological variables. Future projections until 2100 were obtained with the CSHS model. The overall results indicated that the proposed CSHS model could represent a reasonable alternative to teleconnect climate signals with hydrological variables.

    Consulter sur www.sciencedirect.com
  • Laz, O. U., Rahman, A., & Ouarda, T. B. M. J. (2024). Trend and teleconnection analysis of temperature extremes in New South Wales, Australia. Natural Hazards. https://doi.org/10.1007/s11069-024-06954-x

    Abstract This study investigates possible trends and teleconnections in temperature extremes in New South Wales (NSW), Australia. Daily maximum and minimum temperature data covering the period 1971–2021 at 26 stations located in NSW were used. Three indices, which focus on daily maximum temperature, daily minimum temperature, and average daily temperature in terms of Excessive Heat Factor (EHF) were investigated to identify the occurrence of heatwaves (HWs). The study considered HWs of different durations (1-, 5-, and 10-days) in relation to intensity, frequency, duration, and their first occurrence parameters. Finally, the influences of three global climate drivers, namely – the El Niño/Southern Oscillation (ENSO), the Southern Annular Mode (SAM), and the Indian Ocean Dipole (IOD) were investigated with associated heatwave attributes for extended Austral summers. In this study, an increasing trend in both hot days and nights was observed for most of the selected stations within the study area. The increase was more pronounced for the last decade (2011–2021) of the investigated time period. The number, duration and frequency of the heatwaves increased over time considering the EHF criterion, whereas no particular trend was detected in cases of TX90 and TN90. It was also evident that the first occurrence of all the HWs shifted towards the onset of the extended summer while considering the EHF criterion of HWs. The correlations between heatwave attributes and climate drivers depicted that heatwave over NSW was positively influenced by both the IOD and ENSO and negatively correlated with SAM. The findings of this study will be useful in formulating strategies for managing the impacts of extreme temperature events such as bushfires, floods, droughts to the most at-risk regions within NSW.

    Consulter sur link.springer.com
  • Latif, S., El Ouadi, I., & Ouarda, T. B. M. J. (2025). Copula-based joint distribution modelling of precipitation, temperature and humidity events in the assessments of agricultural risks, with a case study in Morocco. Stochastic Environmental Research and Risk Assessment, 39(9), 4017–4061. https://doi.org/10.1007/s00477-025-03047-4

    The agriculture sector is profoundly impacted by the abiotic stresses in arid or semi-arid regions that experience extreme weather patterns related to temperature (T), precipitation (P), humidity (H), and other factors. This study adopts a flexible approach that incorporates the D-vine copula density to analyze trivariate (and bivariate) joint and conditional hazard risk. The methodology was applied to a case study in the Ait Ben Yacoub region of Morocco. Monthly series for T, H, and P were modeled using the Weibull-2P and Weibull-3P models, selected based on fitness statistics. The survival BB8 copula was best described as joint dependence for pair T–P, rotated BB8 270 degrees copula for T–H, while rotated Joe 270 degrees copula for P–H. The analysis of joint probability stress focused on both primary joint scenarios (for OR and AND-hazard conditions) and conditional return periods (RPs) for trivariate and bivariate case. Lower univariate RPs resulted in higher marginal quantiles for T and lower for H and P events. Lower trivariate (and bivariate) AND-joint RPs (or higher concurrence probabilities) were associated with higher T with lower P and H quantiles. The occurrence of trivariate (and bivariate) events was less frequent in the AND-joint case compared to the OR-joint case. The conditional joint RP of T (or T with P, or T with H) was significantly affected by different P (at 10th and 25th percentile) and H (at 5th and 25th percentile) (or P, or H) conditions. Lower conditional RPs of T (or T with H, or T with P) had resulted at given low P and H (or low P, or low H levels). In conclusion, the estimated risk statistics are vital for the study region, highlighting the need for effective adaptation and resilience planning in agriculture crop management.

    Consulter sur doi.org
  • Saint Criq, L., Gaume, E., Hamdi, Y., & Ouarda, T. B. M. J. (2022). Extreme Sea Level Estimation Combining Systematic Observed Skew Surges and Historical Record Sea Levels. Water Resources Research, 58(3). https://doi.org/10.1029/2021WR030873

    Abstract The estimation of sea levels corresponding to high return periods is crucial for coastal planning and for the design of coastal defenses. This paper deals with the use of historical observations, that is, events that occurred before the beginning of the systematic tide gauge recordings, to improve the estimation of design sea levels. Most of the recent publications dealing with statistical analyses applied to sea levels suggest that astronomical high tide levels and skew surges should be analyzed and modeled separately. Historical samples generally consist of observed record sea levels. Some extreme historical skew surges can easily remain unnoticed if they occur at low or moderate astronomical high tides and do not generate extreme sea levels. The exhaustiveness of historical skew surge series, which is an essential criterion for an unbiased statistical inference, can therefore not be guaranteed. This study proposes a model combining, in a single Bayesian inference procedure, information of two different natures for the calibration of the statistical distribution of skew surges: measured skew surges for the systematic period and extreme sea levels for the historical period. A data‐based comparison of the proposed model with previously published approaches is presented based on a large number of Monte Carlo simulations. The proposed model is applied to four locations on the French Atlantic and Channel coasts. Results indicate that the proposed model is more reliable and accurate than previously proposed methods that aim at the integration of historical records in coastal sea level or surge statistical analyses. , Plain Language Summary Coastal facilities must be designed as to be protected from extreme sea levels. Sea levels at high tide are the combination of astronomical high tides, which can be predicted, and skew surges. The estimation of the statistical distribution of skew surges is usually based on the skew surges measured by tide gauges and can be improved with the use of historical information, observations that occurred before the beginning of the tide gauge recordings. Extreme skew surges combined with low or moderate astronomical high tides would not necessarily generate extreme sea levels, and consequently some extreme historical skew surges could be missed. The exhaustiveness of historical information is an essential criterion for an unbiased estimation, but it cannot be guaranteed in the case of historical skew surges. The present study proposes to combine skew surges for the recent period and extreme sea levels for the historical period. The proposed model is compared to previously published approaches and appears to be more reliable and accurate. The proposed model is applied to four case studies on the French Atlantic and Channel coasts. , Key Points The exhaustiveness of historical sea record information is demonstrated based on French Atlantic coast data A comparative analysis of approaches to integrate historical information is carried out The efficiency of a new method for the combination of systematic skew surges and historical records is verified

    Consulter sur agupubs.onlinelibrary.wiley.com
  • Thiombiano, A. N., St-Hilaire, A., Adlouni, S. E., & Ouarda, T. B. M. J. (2018). Nonlinear response of precipitation to climate indices using a non-stationary Poisson-generalized Pareto model: case study of southeastern Canada. International Journal of Climatology, 38. https://doi.org/10.1002/joc.5415

    Quantile estimates are generally interpreted in association with the return period concept in practical engineering. To do so with the peaks‐over‐threshold (POT) approach, combined Poisson‐generalized Pareto distributions (referred to as PD‐GPD model) must be considered. In this article, we evaluate the incorporation of non‐stationarity in the generalized Pareto distribution (GPD) and the Poisson distribution (PD) using, respectively, the smoothing‐based B‐spline functions and the logarithmic link function. Two models are proposed, a stationary PD combined to a non‐stationary GPD (referred to as PD0‐GPD1) and a combined non‐stationary PD and GPD (referred to as PD1‐GPD1). The teleconnections between hydro‐climatological variables and a number of large‐scale climate patterns allow using these climate indices as covariates in the development of non‐stationary extreme value models. The case study is made with daily precipitation amount time series from southeastern Canada and two climatic covariates, the Arctic Oscillation (AO) and the Pacific North American (PNA) indices. A comparison of PD0‐GPD1 and PD1‐GPD1 models showed that the incorporation of non‐stationarity in both POT models instead of solely in the GPD has an effect on the estimated quantiles. The use of the B‐spline function as link function between the GPD parameters and the considered climatic covariates provided flexible non‐stationary PD‐GPD models. Indeed, linear and nonlinear conditional quantiles are observed at various stations in the case study, opening an interesting perspective for further research on the physical mechanism behind these simple and complex interactions.

  • Alaya, M. B., Ternynck, C., Dabo-Niang, S., Chebana, F., & Ouarda, T. B. M. J. (2020). Change point detection of flood events using a functional data framework. Advances in Water Resources, 137. https://doi.org/10.1016/j.advwatres.2020.103522

    Abstract Change point detection methods have an important role in many hydrological and hydraulic studies of river basins. These methods are very useful to characterize changes in hydrological regimes and can, therefore, lead to better understanding changes in extreme flows behavior. Flood events are generally characterized by a finite number of characteristics that may not include the entire information available in a discharge time series. The aim of the current work is to present a new approach to detect changes in flood events based on a functional data analysis framework. The use of the functional approach allows taking into account the whole information contained in the discharge time series of flood events. The presented methodology is illustrated on a flood analysis case study, from the province of Quebec, Canada. Obtained results using the proposed approach are consistent with those obtained using a traditional change point method, and demonstrate the capability of the functional framework to simultaneously consider several flood features and, therefore, presenting a comprehensive way for a better exploitation of the information contained in a discharge time series.

RIS

Format recommandé pour la plupart des logiciels de gestion de références bibliographiques

BibTeX

Format recommandé pour les logiciels spécialement conçus pour BibTeX

Flux web personnalisé
Dernière mise à jour depuis la base de données : 2025-09-21 06 h 30 (UTC)

Explorer

Axes du RIISQ

  • 1 - aléas, vulnérabilités et exposition (3)
  • 2 - enjeux de gestion et de gouvernance (2)
  • 3 - aspects biopsychosociaux (3)
  • 4 - réduction des vulnérabilités (1)
  • 5 - aide à la décision, à l’adaptation et à la résilience (2)

Enjeux majeurs

  • Inégalités et événements extrêmes
  • Prévision, projection et modélisation (1)
  • Risques systémiques (1)

Lieux

  • Canada (2)
  • Québec (province) (1)

Secteurs et disciplines

  • Nature et Technologie (4)
  • Société et Culture (4)
  • Santé (1)

Types d'événements extrêmes

  • Évènements liés au froid (neige, glace) (4)
  • Inondations et crues (2)
  • Sécheresses et canicules (2)
  • Feux de forêts (1)

Types d'inondations

  • Fluviales (2)

Type de ressource

  • Article de revue (6)

Année de publication

  • Entre 2000 et 2025 (6)
    • Entre 2010 et 2019 (1)
      • 2018 (1)
    • Entre 2020 et 2025 (5)
      • 2020 (1)
      • 2022 (1)
      • 2024 (1)
      • 2025 (2)

Langue de la ressource

  • Anglais (3)

Explorer

UQAM - Université du Québec à Montréal

  • Veille bibliographique sur les inondations
  • bibliotheques@uqam.ca

Accessibilité Web