UQAM logo
Page d'accueil de l'UQAM Étudier à l'UQAM Bottin du personnel Carte du campus Bibliothèques Pour nous joindre

Service des bibliothèques

Veille bibliographique sur les inondations
UQAM logo
Veille bibliographique sur les inondations
  • Bibliography
  1. Vitrine des bibliographies
  2. Veille bibliographique sur les inondations
  3. Résultats
Veille bibliographique sur les inondationsVeille bibliographique sur les inondations
  • Bibliography

Votre recherche

Réinitialiser la recherche

Aide

L’interface de recherche est composée de trois sections : Rechercher, Explorer et Résultats. Celles-ci sont décrites en détail ci-dessous.

Vous pouvez lancer une recherche aussi bien à partir de la section Rechercher qu’à partir de la section Explorer.

Rechercher

Cette section affiche vos critères de recherche courants et vous permet de soumettre des mots-clés à chercher dans la bibliographie.

  • Chaque nouvelle soumission ajoute les mots-clés saisis à la liste des critères de recherche.
  • Pour lancer une nouvelle recherche plutôt qu’ajouter des mots-clés à la recherche courante, utilisez le bouton Réinitialiser la recherche, puis entrez vos mots-clés.
  • Pour remplacer un mot-clé déjà soumis, veuillez d’abord le retirer en décochant sa case à cocher, puis soumettre un nouveau mot-clé.
  • Vous pouvez contrôler la portée de votre recherche en choisissant où chercher. Les options sont :
    • Partout : repère vos mots-clés dans tous les champs des références bibliographiques ainsi que dans le contenu textuel des documents disponibles.
    • Dans les auteurs ou contributeurs : repère vos mots-clés dans les noms d’auteurs ou de contributeurs.
    • Dans les titres : repère vos mots-clés dans les titres.
    • Dans les années de publication : repère vos mots-clés dans le champ d’année de publication (vous pouvez utiliser l’opérateur OU avec vos mots-clés pour trouver des références ayant différentes années de publication. Par exemple, 2020 OU 2021).
    • Dans tous les champs : repère vos mots-clés dans tous les champs des notices bibliographiques.
    • Dans les documents : repère vos mots-clés dans le contenu textuel des documents disponibles.
  • Vous pouvez utiliser les opérateurs booléens avec vos mots-clés :
    • ET : repère les références qui contiennent tous les termes fournis. Ceci est la relation par défaut entre les termes séparés d’un espace. Par exemple, a b est équivalent à a ET b.
    • OU : repère les références qui contiennent n’importe lequel des termes fournis. Par exemple, a OU b.
    • SAUF : exclut les références qui contiennent le terme fourni. Par exemple, SAUF a.
    • Les opérateurs booléens doivent être saisis en MAJUSCULES.
  • Vous pouvez faire des groupements logiques (avec les parenthèses) pour éviter les ambiguïtés lors de la combinaison de plusieurs opérateurs booléens. Par exemple, (a OU b) ET c.
  • Vous pouvez demander une séquence exacte de mots (avec les guillemets droits), par exemple "a b c". Par défaut la différence entre les positions des mots est de 1, ce qui signifie qu’une référence sera repérée si elle contient les mots et qu’ils sont consécutifs. Une distance maximale différente peut être fournie (avec le tilde), par exemple "a b"~2 permet jusqu’à un terme entre a et b, ce qui signifie que la séquence a c b pourrait être repérée aussi bien que a b.
  • Vous pouvez préciser que certains termes sont plus importants que d’autres (avec l’accent circonflexe). Par exemple, a^2 b c^0.5 indique que a est deux fois plus important que b dans le calcul de pertinence des résultats, tandis que c est de moitié moins important. Ce type de facteur peut être appliqué à un groupement logique, par exemple (a b)^3 c.
  • La recherche par mots-clés est insensible à la casse et les accents et la ponctuation sont ignorés.
  • Les terminaisons des mots sont amputées pour la plupart des champs, tels le titre, le résumé et les notes. L’amputation des terminaisons vous évite d’avoir à prévoir toutes les formes possibles d’un mot dans vos recherches. Ainsi, les termes municipal, municipale et municipaux, par exemple, donneront tous le même résultat. L’amputation des terminaisons n’est pas appliquée au texte des champs de noms, tels auteurs/contributeurs, éditeur, publication.

Explorer

Cette section vous permet d’explorer les catégories associées aux références.

  • Les catégories peuvent servir à affiner votre recherche. Cochez une catégorie pour l’ajouter à vos critères de recherche. Les résultats seront alors restreints aux références qui sont associées à cette catégorie.
  • Dé-cochez une catégorie pour la retirer de vos critères de recherche et élargir votre recherche.
  • Les nombres affichés à côté des catégories indiquent combien de références sont associées à chaque catégorie considérant les résultats de recherche courants. Ces nombres varieront en fonction de vos critères de recherche, de manière à toujours décrire le jeu de résultats courant. De même, des catégories et des facettes entières pourront disparaître lorsque les résultats de recherche ne contiennent aucune référence leur étant associées.
  • Une icône de flèche () apparaissant à côté d’une catégorie indique que des sous-catégories sont disponibles. Vous pouvez appuyer sur l’icône pour faire afficher la liste de ces catégories plus spécifiques. Par la suite, vous pouvez appuyer à nouveau pour masquer la liste. L’action d’afficher ou de masquer les sous-catégories ne modifie pas vos critères de recherche; ceci vous permet de rapidement explorer l’arborescence des catégories, si désiré.

Résultats

Cette section présente les résultats de recherche. Si aucun critère de recherche n’a été fourni, elle montre toute la bibliographie (jusqu’à 20 références par page).

  • Chaque référence de la liste des résultats est un hyperlien vers sa notice bibliographique complète. À partir de la notice, vous pouvez continuer à explorer les résultats de recherche en naviguant vers les notices précédentes ou suivantes de vos résultats de recherche, ou encore retourner à la liste des résultats.
  • Des hyperliens supplémentaires, tels que Consulter le document ou Consulter sur [nom d’un site web], peuvent apparaître sous un résultat de recherche. Ces liens vous fournissent un accès rapide à la ressource, des liens que vous trouverez également dans la notice bibliographique.
  • Le bouton Résumés vous permet d’activer ou de désactiver l’affichage des résumés dans la liste des résultats de recherche. Toutefois, activer l’affichage des résumés n’aura aucun effet sur les résultats pour lesquels aucun résumé n’est disponible.
  • Diverses options sont fournies pour permettre de contrôler l’ordonnancement les résultats de recherche. L’une d’elles est l’option de tri par Pertinence, qui classe les résultats du plus pertinent au moins pertinent. Le score utilisé à cette fin prend en compte la fréquence des mots ainsi que les champs dans lesquels ils apparaissent. Par exemple, si un terme recherché apparaît fréquemment dans une référence ou est l’un d’un très petit nombre de termes utilisé dans cette référence, cette référence aura probablement un score plus élevé qu’une autre où le terme apparaît moins fréquemment ou qui contient un très grand nombre de mots. De même, le score sera plus élevé si un terme est rare dans l’ensemble de la bibliographie que s’il est très commun. De plus, si un terme de recherche apparaît par exemple dans le titre d’une référence, le score de cette référence sera plus élevé que s’il apparaissait dans un champ moins important tel le résumé.
  • Le tri par Pertinence n’est disponible qu’après avoir soumis des mots-clés par le biais de la section Rechercher.
  • Les catégories sélectionnées dans la section Explorer n’ont aucun effet sur le tri par pertinence. Elles ne font que filtrer la liste des résultats.
Dans les auteurs ou contributeurs
  • "Nadeau, Daniel F."

Résultats 8 ressources

PertinenceRecently addedDate décroissanteDate croissanteAuteur A-ZAuteur Z-ATitre A-ZTitre Z-A
Résumés
  • Isabelle, P.-E., Nadeau, D. F., Rousseau, A. N., & Anctil, F. (2018). Water budget, performance of evapotranspiration formulations, and their impact on hydrological modeling of a small boreal peatland-dominated watershed. Canadian Journal of Earth Sciences, 55(2). https://doi.org/10.1139/cjes-2017-0046

    Peatlands occupy around 13% of the land cover of Canada, and thus play a key role in the water balance at high latitudes. They are well known for having substantial water loss due to evapotranspiration. Since measurements of evapotranspiration are scarce over these environments, hydrologists generally rely on models of varying complexity to evaluate these water exchanges in the global watershed balance. This study quantifies the water budget of a small boreal peatland-dominated watershed. We assess the performance of three evapotranspiration models in comparison with in situ observations and the impact of using these models in the hydrological modeling of the watershed. The study site (~1-km2) is located in the Eastern James Bay lowlands, Quebec, Canada. During summer 2012, an eddy flux tower measured evapotranspiration continuously, while a trapezoidal flume monitored streamflow at the watershed outlet. We estimated evapotranspiration with a combinational model (Penman), a radiation-based model (Priestle...

  • Kallel, H., Thiboult, A., Mackay, M. D., Nadeau, D. F., & Anctil, F. (2024). Modeling Heat and Water Exchanges between the Atmosphere and an 85-km2 Dimictic Subarctic Reservoir Using the 1D Canadian Small Lake Model. Journal of Hydrometeorology, 25(5), 689–707. https://doi.org/10.1175/JHM-D-22-0132.1

    Abstract Accurately modeling the interactions between inland water bodies and the atmosphere in meteorological and climate models is crucial, given the marked differences with surrounding landmasses. Modeling surface heat fluxes remains a challenge because direct observations available for validation are rare, especially at high latitudes. This study presents a detailed evaluation of the Canadian Small Lake Model (CSLM), a one-dimensional mixed-layer dynamic lake model, in reproducing the surface energy budget and the thermal stratification of a subarctic reservoir in eastern Canada. The analysis is supported by multiyear direct observations of turbulent heat fluxes collected on and around the 85-km 2 Romaine-2 hydropower reservoir (50.7°N, 63.2°W) by two flux towers: one operating year-round on the shore and one on a raft during ice-free conditions. The CSLM, which simulates the thermal regime of the water body including ice formation and snow physics, is run in offline mode and forced by local weather observations from 25 June 2018 to 8 June 2021. Comparisons between observations and simulations confirm that CSLM can reasonably reproduce the turbulent heat fluxes and the temperature behavior of the reservoir, despite the one-dimensional nature of the model that cannot account for energy inputs and outputs associated with reservoir operations. The best performance is achieved during the first few months after the ice break-up (mean error = −0.3 and −2.7 W m −2 for latent and sensible heat fluxes, respectively). The model overreacts to strong wind events, leading to subsequent poor estimates of water temperature and eventually to an early freeze-up. The model overestimated the measured annual evaporation corrected for the lack of energy balance closure by 5% and 16% in 2019 and 2020. Significance Statement Freshwater bodies impact the regional climate through energy and water exchanges with the atmosphere. It is challenging to model surface energy fluxes over a northern lake due to the succession of stratification and mixing periods over a year. This study focuses on the interactions between the atmosphere of an irregular shaped northern hydropower reservoir. Direct measurements of turbulent fluxes using an eddy covariance system allowed the model assessment. Turbulent fluxes were successfully predicted during the open water period. Comparison between observed and modeled time series showed a good agreement; however, the model overreacted to high wind episodes. Biases mostly occur during freeze-up and breakup, stressing the importance of a good representation of the ice cover processes.

    Consulter sur journals.ametsoc.org
  • Bouchard, B., Nadeau, D. F., Domine, F., Anctil, F., Jonas, T., & Tremblay, É. (2024). How does a warm and low-snow winter impact the snow cover dynamics in a humid and discontinuous boreal forest? Insights from observations and modeling in eastern Canada. Hydrology and Earth System Sciences, 28(12), 2745–2765. https://doi.org/10.5194/hess-28-2745-2024

    Abstract. In the boreal forest of eastern Canada, winter temperatures are projected to increase substantially by 2100. This region is also expected to receive less solid precipitation, resulting in a reduction in snow cover thickness and duration. These changes are likely to affect hydrological processes such as snowmelt, the soil thermal regime, and snow metamorphism. The exact impact of future changes is difficult to pinpoint in the boreal forest, due to its complex structure and the fact that snow dynamics under the canopy are very different from those in the gaps. In this study, we assess the influence of a low-snow and warm winter on snowmelt dynamics, soil freezing, snowpack properties, and spring streamflow in a humid and discontinuous boreal catchment of eastern Canada (47.29° N, 71.17° W; ≈ 850 m a.m.s.l.) based on observations and SNOWPACK simulations. We monitored the soil and snow thermal regimes and sampled physical properties of the snowpack under the canopy and in two forest gaps during an exceptionally low-snow and warm winter, projected to occur more frequently in the future, and during a winter with conditions close to normal. We observe that snowmelt was earlier but slower, top soil layers were cooler, and gradient metamorphism was enhanced during the low-snow and warm winter. However, we observe that snowmelt duration increased in forest gaps, that soil freezing was enhanced only under the canopy, and that snow permeability increased more strongly under the canopy than in either gap. Our results highlight that snow accumulation and melt dynamics are controlled by meteorological conditions, soil freezing is controlled by forest structure, and snow properties are controlled by both weather forcing and canopy discontinuity. Overall, observations and simulations suggest that the exceptionally low spring streamflow in the winter of 2020–2120 was mainly driven by low snow accumulation, slow snowmelt, and low precipitation in April and May rather than enhanced percolation through the snowpack and soil freezing.

    Consulter sur hess.copernicus.org
  • Lagueux, P., Sylvain, J.-D., Drolet, G., Isabelle, P.-E., Leonardini, G., Nadeau, D. F., & Anctil, F. (2024). Impacts of forest canopy heterogeneity on plot-scale hydrometeorological variables - Insights from an experiment in the humid boreal forest with the Canadian Land Surface Scheme. Agricultural and Forest Meteorology, 357, 110194. https://doi.org/10.1016/j.agrformet.2024.110194
    Consulter sur linkinghub.elsevier.com
  • Kallel, H., Nadeau, D. F., Bouchard, B., Thiboult, A., Mackay, M. D., & Anctil, F. (2024). Modeling seasonal ice and its impact on the thermal regime of a shallow boreal lake using the Canadian small Lake model. Frontiers in Environmental Science, 12, 1371108. https://doi.org/10.3389/fenvs.2024.1371108

    At high latitudes, lake-atmosphere interactions are disrupted for several months of the year by the presence of an ice cover. By isolating the water column from the atmosphere, ice, typically topped by snow, drastically alters albedo, surface roughness, and heat exchanges relative to the open water period, with major climatic, ecological, and hydrological implications. Lake models used to simulate the appearance and disappearance of the ice cover have rarely been validated with detailed in situ observations of snow and ice. In this study, we investigate the ability of the physically-based 1D Canadian Small Lake Model (CSLM) to simulate the freeze-up, ice-cover growth, and breakup of a small boreal lake. The model, driven offline by local weather observations, is run on Lake Piché, 0.15 km 2 and 4 m deep (47.32°N; 71.15°W) from 25 October 2019 to 20 July 2021, and compared to observations of the temperature profile and ice and snow cover properties. Our results show that the CSLM is able to reproduce the total ice thickness (average error of 15 cm) but not the ice type-specific thickness, underestimating clear ice and overestimating snow ice. CSLM manages to reproduce snow depth (errors less than 10 cm). However, it has an average cold bias of 2°C and an underestimation of average snow density of 34 kg m −3 . Observed and model freeze-up and break-up dates are very similar, as the model is able to predict the longevity of the ice cover to within 2 weeks. CSLM successfully reproduces seasonal stratification, the mixed layer depth, and surface water temperatures, while it shows discrepancies in simulating bottom waters especially during the open water period.

    Consulter sur www.frontiersin.org
  • Isabelle, P.-E., Nadeau, D. F., Anctil, F., Rousseau, A. N., Jutras, S., & Music, B. (2020). Impacts of high precipitation on the energy and water budgets of a humid boreal forest. Agricultural and Forest Meteorology, 280. https://doi.org/10.1016/j.agrformet.2019.107813
    Consulter sur linkinghub.elsevier.com
  • Domart, D., Nadeau, D. F., Thiboult, A., Anctil, F., Ghobrial, T., Prairie, Y. T., Bédard-Therrien, A., & Tremblay, A. (2024). A global analysis of ice phenology for 3702 lakes and 1028 reservoirs across the Northern Hemisphere using Sentinel-2 imagery. Cold Regions Science and Technology, 227, 104294. https://doi.org/10.1016/j.coldregions.2024.104294
    Consulter sur linkinghub.elsevier.com
  • Pierre, A., Nadeau, D. F., Thiboult, A., Rousseau, A. N., Anctil, F., Deblois, C. P., Demarty, M., Isabelle, P.-E., & Tremblay, A. (2024). Does the Operation of a Reservoir Alter Its Interactions with the Atmosphere? Investigating the Role of Advective Fluxes on Energy and Hydrological Balances of the Romaine-2 Subarctic Hydropower Reservoir. Journal of Hydrometeorology, 25(3), 391–411. https://doi.org/10.1175/JHM-D-23-0149.1

    Abstract The hydrological processes of cascading hydroelectric reservoirs differ from those of lakes, due to the importance of the inflows and outflows that vary with energy demand. These heat and water advection terms are rarely considered in water body energy balance analyses even though reservoirs are common man-made structures, especially in North America, and thus may affect the regional climate. This study provides a comprehensive assessment of the water and energy balance of the 85-km 2 Romaine-2 northern reservoir (50.69°N, 63.24°W), mean depth of 44 m, highlighting the significant contribution of the advection heat fluxes. The water balance input was primarily controlled by upstream (turbine) inflows (77.6%), while lateral (natural) inflows and direct precipitation represented 21.2% and 1.2%, respectively. As for the reservoir’s heat budget, the net advection of heat accounted on average for 25.0% of the input, of which net radiation was the largest component (73.3%). After accounting for the absence of energy balance closure, latent heat and sensible heat fluxes represented 73.2% and 25.1% of total energy output from the reservoir, respectively. The thermal regime was influenced by the hydrological flow conditions, which were regulated by reservoir management. This played a major role in the evolution of the thermocline and the temperature of the epilimnion, and ultimately, in the dynamics of the turbulent heat fluxes. This study suggests that the heat advection term represents a large fraction of the heat budget of northern reservoirs and should be properly considered.

    Consulter sur journals.ametsoc.org
RIS

Format recommandé pour la plupart des logiciels de gestion de références bibliographiques

BibTeX

Format recommandé pour les logiciels spécialement conçus pour BibTeX

Flux web personnalisé
Dernière mise à jour depuis la base de données : 2025-06-21 06 h 30 (UTC)

Explorer

Membres du RIISQ

  • Rousseau, Alain (2)

Type de ressource

  • Article de revue (8)

Année de publication

  • Entre 2000 et 2025 (8)
    • Entre 2010 et 2019 (1)
      • 2018 (1)
    • Entre 2020 et 2025 (7)
      • 2020 (1)
      • 2024 (6)

Langue de la ressource

  • Anglais (4)

Explorer

UQAM - Université du Québec à Montréal

  • Veille bibliographique sur les inondations
  • bibliotheques@uqam.ca

Accessibilité Web