Votre recherche

Machine learning (ML) algorithms have emerged as competent tools for identifying areas that are susceptible to flooding. The primary variables considered in most of these works include terrain models, lithology, river networks and land use. While several recent studies include average annual rainfall and/or temperature, other meteorological information such as snow accumulation and short-term intense rain events that may influence the hydrology of the area under investigation have not been considered. Notably, in Canada, most inland flooding occurs during the freshet, due to the melting of an accumulated snowpack coupled with heavy rainfall. Therefore, in this study the impact of several climate variables along with various hydro-geomorphological (HG) variables were tested to determine the impact of their inclusion. Three tests were run: only HG variables, the addition of annual average temperature and precipitation (HG-PT), and the inclusion of six other meteorological datasets (HG-8M) on five study areas across Canada. In HG-PT, both precipitation and temperature were selected as important in every study area, while in HG-8M a minimum of three meteorological datasets were considered important in each study area. Notably, as the meteorological variables were added, many of the initial HG variables were dropped from the selection set. The accuracy, F1, true skill and Area Under the Curve (AUC) were marginally improved when the meteorological data was added to the a parallel random forest algorithm (parRF). When the model is applied to new data, the estimated accuracy of the prediction is higher in HG-8M, indicating that inclusion of relevant, local meteorological datasets improves the result.

Abstract. Canada's RADARSAT missions improve the potential to study past flood events; however, existing tools to derive flood depths from this remote-sensing data do not correct for errors, leading to poor estimates. To provide more accurate gridded depth estimates of historical flooding, a new tool is proposed that integrates Height Above Nearest Drainage and Cost Allocation algorithms. This tool is tested against two trusted, hydraulically derived, gridded depths of recent floods in Canada. This validation shows the proposed tool outperforms existing tools and can provide more accurate estimates from minimal data without the need for complex physics-based models or expert judgement. With improvements in remote-sensing data, the tool proposed here can provide flood researchers and emergency managers accurate depths in near-real time.

Among the most prevalent natural hazards, flooding has been threatening human lives and properties. Robust flood simulation is required for effective response and prevention. Machine learning is widely used in flood modeling due to its high performance and scalability. Nonetheless, data pre-processing of heterogeneous sources can be cumbersome, and traditional data processing and modeling have been limited to a single resolution. This study employed an Icosahedral Snyder Equal Area Aperture 3 Hexagonal Discrete Global Grid System (ISEA3H DGGS) as a scalable, standard spatial framework for computation, integration, and analysis of multi-source geospatial data. We managed to incorporate external machine learning algorithms with a DGGS-based data framework, and project future flood risks under multiple climate change scenarios for southern New Brunswick, Canada. A total of 32 explanatory factors including topographical, hydrological, geomorphic, meteorological, and anthropogenic were investigated. Results showed that low elevation and proximity to permanent waterbodies were primary factors of flooding events, and rising spring temperatures can increase flood risk. Flooding extent was predicted to occupy 135–203% of the 2019 flood area, one of the most recent major flooding events, by the year 2100. Our results assisted in understanding the potential impact of climate change on flood risk, and indicated the feasibility of DGGS as the standard data fabric for heterogeneous data integration and incorporated in multi-scale data mining.

Recent research has extended conventional hydrological algorithms into a hexagonal grid and noted that hydrological modeling on a hexagonal mesh grid outperformed that on a rectangular grid. Among the hydrological products, flow routing grids are the base of many other hydrological simulations, such as flow accumulation, watershed delineation, and stream networks. However, most of the previous research adopted the D6 algorithm, which is analogous to the D8 algorithm over a rectangular grid, to produce flow routing. This paper explored another four methods regarding generating flow directions in a hexagonal grid, based on four algorithms of slope aspect computation. We also developed and visualized hexagonal-grid-based hydrological operations, including flow accumulation, watershed delineation, and hydrological indices computation. Experiments were carried out across multiple grid resolutions with various terrain roughness. The results showed that flow direction can vary among different approaches, and the impact of such variation can propagate to flow accumulation, watershed delineation, and hydrological indices production, which was reflected by the cell-wise comparison and visualization. This research is practical for hydrological analysis in hexagonal, hierarchical grids, such as Discrete Global Grid Systems, and the developed operations can be used in flood modeling in the real world.

Synthetic Aperture Radar (SAR) imagery is a vital tool for flood mapping due to its capability to acquire images day and night in almost any weather and to penetrate through cloud cover. In rural areas, SAR backscatter intensity can be used to detect flooded areas accurately; however, the complexity of urban structures makes flood mapping in urban areas a challenging task. In this study, we examine the synergistic use of SAR simulated reflectivity maps and Polarimetric and Interferometric SAR (PolInSAR) features in the improvement of flood mapping in urban environments. We propose a machine learning model employing simulated and PolInSAR features derived from TerraSAR-X images along with five auxiliary features, namely elevation, slope, aspect, distance from the river, and land-use/land-cover that are well-known to contribute to flood mapping. A total of 2450 data points have been used to build and evaluate the model over four different areas with different vegetation and urban density. The results indicated that by using PolInSAR and SAR simulated reflectivity maps together with five auxiliary features, a classification overall accuracy of 93.1% in urban areas was obtained, representing a 9.6% improvement over using the five auxiliary features alone.

With the record breaking flood experienced in Canada’s capital region in 2017 and 2019, there is an urgent need to update and harmonize existing flood hazard maps and fill in the spatial gaps between them to improve flood mitigation strategies. To achieve this goal, we aim to develop a novel approach using machine learning classification (i.e., random forest). We used existing fragmented flood hazard maps along the Ottawa River to train a random forest classification model using a range of flood conditioning factors. We then applied this classification across the Capital Region to fill in the spatial gaps between existing flood hazard maps and generate a harmonized high-resolution (1 m) 100 year flood susceptibility map. When validated against recently produced 100 year flood hazard maps across the capital region, we find that this random forest classification approach yields a highly accurate flood susceptibility map. We argue that the machine learning classification approach is a promising technique to fill in the spatial gaps between existing flood hazard maps and create harmonized high-resolution flood susceptibility maps across flood-vulnerable areas. However, caution must be taken in selecting suitable flood conditioning factors and extrapolating classification to areas with similar characteristics to the training sites. The resulted harmonized and spatially continuous flood susceptibility map has wide-reaching relevance for flood mitigation planning in the capital region. The machine learning approach and flood classification optimization method developed in this study is also a first step toward Natural Resources Canada’s aim of creating a spatially continuous flood susceptibility map across the Ottawa River watershed. Our modeling approach is transferable to harmonize flood maps and fill in spatial gaps in other regions of the world and will help mitigate flood disasters by providing accurate flood data for urban planning.