UQAM logo
Page d'accueil de l'UQAM Étudier à l'UQAM Bottin du personnel Carte du campus Bibliothèques Pour nous joindre

Service des bibliothèques

Veille bibliographique sur les inondations
UQAM logo
Veille bibliographique sur les inondations
  • Bibliography
  1. Vitrine des bibliographies
  2. Veille bibliographique sur les inondations
  3. Résultats
Veille bibliographique sur les inondationsVeille bibliographique sur les inondations
  • Bibliography

Votre recherche

Réinitialiser la recherche

Aide

L’interface de recherche est composée de trois sections : Rechercher, Explorer et Résultats. Celles-ci sont décrites en détail ci-dessous.

Vous pouvez lancer une recherche aussi bien à partir de la section Rechercher qu’à partir de la section Explorer.

Rechercher

Cette section affiche vos critères de recherche courants et vous permet de soumettre des mots-clés à chercher dans la bibliographie.

  • Chaque nouvelle soumission ajoute les mots-clés saisis à la liste des critères de recherche.
  • Pour lancer une nouvelle recherche plutôt qu’ajouter des mots-clés à la recherche courante, utilisez le bouton Réinitialiser la recherche, puis entrez vos mots-clés.
  • Pour remplacer un mot-clé déjà soumis, veuillez d’abord le retirer en décochant sa case à cocher, puis soumettre un nouveau mot-clé.
  • Vous pouvez contrôler la portée de votre recherche en choisissant où chercher. Les options sont :
    • Partout : repère vos mots-clés dans tous les champs des références bibliographiques ainsi que dans le contenu textuel des documents disponibles.
    • Dans les auteurs ou contributeurs : repère vos mots-clés dans les noms d’auteurs ou de contributeurs.
    • Dans les titres : repère vos mots-clés dans les titres.
    • Dans les années de publication : repère vos mots-clés dans le champ d’année de publication (vous pouvez utiliser l’opérateur OU avec vos mots-clés pour trouver des références ayant différentes années de publication. Par exemple, 2020 OU 2021).
    • Dans tous les champs : repère vos mots-clés dans tous les champs des notices bibliographiques.
    • Dans les documents : repère vos mots-clés dans le contenu textuel des documents disponibles.
  • Vous pouvez utiliser les opérateurs booléens avec vos mots-clés :
    • ET : repère les références qui contiennent tous les termes fournis. Ceci est la relation par défaut entre les termes séparés d’un espace. Par exemple, a b est équivalent à a ET b.
    • OU : repère les références qui contiennent n’importe lequel des termes fournis. Par exemple, a OU b.
    • SAUF : exclut les références qui contiennent le terme fourni. Par exemple, SAUF a.
    • Les opérateurs booléens doivent être saisis en MAJUSCULES.
  • Vous pouvez faire des groupements logiques (avec les parenthèses) pour éviter les ambiguïtés lors de la combinaison de plusieurs opérateurs booléens. Par exemple, (a OU b) ET c.
  • Vous pouvez demander une séquence exacte de mots (avec les guillemets droits), par exemple "a b c". Par défaut la différence entre les positions des mots est de 1, ce qui signifie qu’une référence sera repérée si elle contient les mots et qu’ils sont consécutifs. Une distance maximale différente peut être fournie (avec le tilde), par exemple "a b"~2 permet jusqu’à un terme entre a et b, ce qui signifie que la séquence a c b pourrait être repérée aussi bien que a b.
  • Vous pouvez préciser que certains termes sont plus importants que d’autres (avec l’accent circonflexe). Par exemple, a^2 b c^0.5 indique que a est deux fois plus important que b dans le calcul de pertinence des résultats, tandis que c est de moitié moins important. Ce type de facteur peut être appliqué à un groupement logique, par exemple (a b)^3 c.
  • La recherche par mots-clés est insensible à la casse et les accents et la ponctuation sont ignorés.
  • Les terminaisons des mots sont amputées pour la plupart des champs, tels le titre, le résumé et les notes. L’amputation des terminaisons vous évite d’avoir à prévoir toutes les formes possibles d’un mot dans vos recherches. Ainsi, les termes municipal, municipale et municipaux, par exemple, donneront tous le même résultat. L’amputation des terminaisons n’est pas appliquée au texte des champs de noms, tels auteurs/contributeurs, éditeur, publication.

Explorer

Cette section vous permet d’explorer les catégories associées aux références.

  • Les catégories peuvent servir à affiner votre recherche. Cochez une catégorie pour l’ajouter à vos critères de recherche. Les résultats seront alors restreints aux références qui sont associées à cette catégorie.
  • Dé-cochez une catégorie pour la retirer de vos critères de recherche et élargir votre recherche.
  • Les nombres affichés à côté des catégories indiquent combien de références sont associées à chaque catégorie considérant les résultats de recherche courants. Ces nombres varieront en fonction de vos critères de recherche, de manière à toujours décrire le jeu de résultats courant. De même, des catégories et des facettes entières pourront disparaître lorsque les résultats de recherche ne contiennent aucune référence leur étant associées.
  • Une icône de flèche () apparaissant à côté d’une catégorie indique que des sous-catégories sont disponibles. Vous pouvez appuyer sur l’icône pour faire afficher la liste de ces catégories plus spécifiques. Par la suite, vous pouvez appuyer à nouveau pour masquer la liste. L’action d’afficher ou de masquer les sous-catégories ne modifie pas vos critères de recherche; ceci vous permet de rapidement explorer l’arborescence des catégories, si désiré.

Résultats

Cette section présente les résultats de recherche. Si aucun critère de recherche n’a été fourni, elle montre toute la bibliographie (jusqu’à 20 références par page).

  • Chaque référence de la liste des résultats est un hyperlien vers sa notice bibliographique complète. À partir de la notice, vous pouvez continuer à explorer les résultats de recherche en naviguant vers les notices précédentes ou suivantes de vos résultats de recherche, ou encore retourner à la liste des résultats.
  • Des hyperliens supplémentaires, tels que Consulter le document ou Consulter sur [nom d’un site web], peuvent apparaître sous un résultat de recherche. Ces liens vous fournissent un accès rapide à la ressource, des liens que vous trouverez également dans la notice bibliographique.
  • Le bouton Résumés vous permet d’activer ou de désactiver l’affichage des résumés dans la liste des résultats de recherche. Toutefois, activer l’affichage des résumés n’aura aucun effet sur les résultats pour lesquels aucun résumé n’est disponible.
  • Diverses options sont fournies pour permettre de contrôler l’ordonnancement les résultats de recherche. L’une d’elles est l’option de tri par Pertinence, qui classe les résultats du plus pertinent au moins pertinent. Le score utilisé à cette fin prend en compte la fréquence des mots ainsi que les champs dans lesquels ils apparaissent. Par exemple, si un terme recherché apparaît fréquemment dans une référence ou est l’un d’un très petit nombre de termes utilisé dans cette référence, cette référence aura probablement un score plus élevé qu’une autre où le terme apparaît moins fréquemment ou qui contient un très grand nombre de mots. De même, le score sera plus élevé si un terme est rare dans l’ensemble de la bibliographie que s’il est très commun. De plus, si un terme de recherche apparaît par exemple dans le titre d’une référence, le score de cette référence sera plus élevé que s’il apparaissait dans un champ moins important tel le résumé.
  • Le tri par Pertinence n’est disponible qu’après avoir soumis des mots-clés par le biais de la section Rechercher.
  • Les catégories sélectionnées dans la section Explorer n’ont aucun effet sur le tri par pertinence. Elles ne font que filtrer la liste des résultats.
Dans les auteurs ou contributeurs
  • "Déry, Stephen J."
Année de publication
  • Entre 2000 et 2025

Résultats 10 ressources

PertinenceRecently addedDate décroissanteDate croissanteAuteur A-ZAuteur Z-ATitre A-ZTitre Z-A
Résumés
  • Islam, S. ul, & Déry, S. J. (2016). Evaluating uncertainties in modelling the snow hydrology of the Fraser River Basin, British Columbia, Canada. Hydrology and Earth System Sciences, 21(3). https://doi.org/10.5194/hess-21-1827-2017

    This study evaluates predictive uncertainties in the snow hydrology of the Fraser River Basin(FRB) of British Columbia(BC), Canada, using the Variable Infiltration Capacity(VIC) model forced with several high-resolution gridded climate datasets. These datasets include the Canadian Precipitation Analysis and the thin-plate smoothing splines(ANUSPLIN), North American Regional Reanalysis(NARR), University of Washington(UW) and Pacific Climate Impacts Consortium(PCIC) gridded products. Uncertainties are evaluated at different stages of the VIC implementation, starting with the driving datasets, optimization of model parameters, and model calibration during cool and warm phases of the Pacific Decadal Oscillation(PDO). The inter-comparison of the forcing datasets (precipitation and air temperature) and their VIC simulations (snow water equivalent – SWE – and runoff) reveals widespread differences over the FRB, especially in mountainous regions. The ANUSPLIN precipitation shows a considerable dry bias in the Rocky Mountains, whereas the NARR winter air temperature is 2°C warmer than the other datasets over most of the FRB. In the VIC simulations, the elevation-dependent changes in the maximum SWE(maxSWE) are more prominent at higher elevations of the Rocky Mountains, where the PCIC-VIC simulation accumulates too much SWE and ANUSPLIN-VIC yields an underestimation. Additionally, at each elevation range, the day of maxSWE varies from 10to 20days between the VIC simulations. The snow melting season begins early in the NARR-VIC simulation, whereas the PCIC-VIC simulation delays the melting, indicating seasonal uncertainty in SWE simulations. When compared with the observed runoff for the Fraser River main stem at Hope, BC, the ANUSPLIN-VIC simulation shows considerable underestimation of runoff throughout the water year owing to reduced precipitation in the ANUSPLIN forcing dataset. The NARR-VIC simulation yields more winter and spring runoff and earlier decline of flows in summer due to a nearly 15-day earlier onset of the FRB springtime snowmelt. Analysis of the parametric uncertainty in the VIC calibration process shows that the choice of the initial parameter range plays a crucial role in defining the model hydrological response for the FRB. Furthermore, the VIC calibration process is biased toward cool and warm phases of the PDO and the choice of proper calibration and validation time periods is important for the experimental setup. Overall the VIC hydrological response is prominently influenced by the uncertainties involved in the forcing datasets rather than those in its parameter optimization and experimental setups.

  • Rickard, L. J., Déry, S. J., Stewart, R. E., & Thériault, J. M. (2025). Meteorologically Related Factors Leading to the 2008, 2018, and 2019 Major Spring Floods in the Transboundary Saint John River (Wolastoq) Basin. Journal of Hydrometeorology, 26(2), 201–220. https://doi.org/10.1175/JHM-D-24-0032.1

    Abstract The flood-prone Saint John River (SJR, Wolastoq), which lies within a drainage basin of 55 110 km 2 , flows a length of 673 km from its source in northern Maine, United States, to its mouth in southern New Brunswick, Canada. Major industries in the basin include forestry, agriculture, and hydroelectric power. During the 1991–2020 reference period, the SJR basin (SJRB) experienced major spring flood events in 2008, 2018, and 2019. As part of the Saint John River Experiment on Cold Season Storms, the objective of this research is to characterize and contrast these three major spring flood events. Given that the floods all occurred during spring, the hypothesis being tested is that rapid snowmelt alone is the dominant driver of flooding in the SJRB. There were commonalities and differences regarding the contributing factors of the three flood years. When averaged across the upper basin, they showed consistency in terms of positive winter and spring total precipitation anomalies, positive snow water equivalent anomalies, and steep increases in April cumulative runoff. Rain-on-snow events were a prominent feature of all three flood years. However, differences between flood years were also evident, including inconsistencies with respect to ice jams and high tides. Certain factors were present in only one or two of the three flood years, including positive total precipitation anomalies in spring, positive heavy liquid precipitation anomalies in spring, positive heavy solid precipitation anomalies in winter, and positive temperature anomalies in spring. The dominant factor contributing to peak water levels was rapid snowmelt.

    Consulter sur journals.ametsoc.org
  • Déry, S. J., Stadnyk, T. A., MacDonald, M. K., & Gauli-Sharma, B. (2016). Recent trends and variability in river discharge across northern Canada. Hydrology and Earth System Sciences, 20(12). https://doi.org/10.5194/hess-20-4801-2016

    Abstract. This study presents an analysis of the observed inter-annual variability and inter-decadal trends in river discharge across northern Canada for 1964–2013. The 42 rivers chosen for this study span a combined gauged area of 5.26×106km2 and are selected based on data availability and quality, gauged area and record length. Inter-annual variability in river discharge is greatest for the eastern Arctic Ocean (coefficient of variation, CV=16%) due to the Caniapiscau River diversion into the La Grande Riviere system for enhanced hydropower production. Variability is lowest for the study area as a whole (CV=7%). Based on the Mann–Kendall test (MKT), no significant (p>0.05) trend in annual discharge from 1964 to 2013 is observed in the Bering Sea, western Arctic Ocean, western Hudson and James Bay, and Labrador Sea; for northern Canada as a whole, however, a statistically significant (p

  • Islam, S. ul, Hay, R. W., Déry, S. J., & Booth, B. P. (2019). Modelling the impacts of climate change on riverine thermal regimes in western Canada’s largest Pacific watershed. Scientific Reports, 9(1). https://doi.org/10.1038/s41598-019-47804-2

    Quantification of climate change impacts on the thermal regimes of rivers in British Columbia (BC) is crucial given their importance to aquatic ecosystems. Using the Air2Stream model, we investigate the impact of both air temperature and streamflow changes on river water temperatures from 1950 to 2015 across BC’s 234,000 km2 Fraser River Basin (FRB). Model results show the FRB’s summer water temperatures rose by nearly 1.0°C during 1950–2015 with 0.47°C spread across 17 river sites. For most of these sites, such increases in average summer water temperature have doubled the number of days exceeding 20°C, the water temperature that, if exceeded, potentially increases the physiological stress of salmon during migration. Furthermore, river sites, especially those in the upper and middle FRB, show significant associations between Pacific Ocean teleconnections and regional water temperatures. A multivariate linear regression analysis reveals that air temperature primarily controls simulated water temperatures in the FRB by capturing ~80% of its explained variance with secondary impacts through river discharge. Given such increases in river water temperature, salmon returning to spawn inthe Fraser River and its tributaries are facing continued and increasing physical challenges now and potentially into the future.

  • Thompson, H. D., Déry, S. J., Jackson, P. L., & Laval, B. E. (2020). A synoptic climatology of potential seiche-inducing winds in a large intermontane lake: Quesnel Lake, British Columbia, Canada. International Journal of Climatology. https://doi.org/10.1002/joc.6560
  • Richards-Thomas, T. S., Déry, S. J., Stewart, R. E., & Thériault, J. M. (2024). Climatological context of the mid-November 2021 floods in the province of British Columbia, Canada. Weather and Climate Extremes, 45, 100705. https://doi.org/10.1016/j.wace.2024.100705
    Consulter sur linkinghub.elsevier.com
  • Déry, S. J., Stadnyk, T. A., MacDonald, M. K., Koenig, K. A., & Guay, C. (2018). Flow alteration impacts on Hudson Bay river discharge. Hydrological Processes, 32(24). https://doi.org/10.1002/hyp.13285
  • Stadnyk, T. A., MacDonald, M. K., Tefs, A., Déry, S. J., Koenig, K. A., Gustafsson, D., Isberg, K., & Arheimer, B. (2020). Hydrological modeling of freshwater discharge into Hudson Bay using HYPE. 8(1). https://doi.org/10.1525/elementa.439

    This study details the enhancement and calibration of the Arctic implementation of the HYdrological Predictions for the Environment (HYPE) hydrological model established for the BaySys group of projects to produce freshwater discharge scenarios for the Hudson Bay Drainage Basin (HBDB). The challenge in producing estimates of freshwater discharge for the HBDB is that it spans over a third of Canada’s continental landmass and is 40% ungauged. Scenarios for BaySys require the separation between human and climate interactions, specifically the separation of regulated river discharge from a natural, climate-driven response. We present three key improvements to the modelling system required to support the identification of natural from anthropogenic impacts: representation of prairie disconnected landscapes (i.e., non-contributing areas), a method to generalize lake storage-discharge parameters across large regions, and frozen soil modifications. Additionally, a unique approach to account for irregular hydrometric gauge density across the basins during model calibration is presented that avoids overfitting parameters to the densely gauged southern regions. We summarize our methodologies used to facilitate improved separation of human and climate driven impacts to streamflow within the basin and outline the baseline discharge simulations used for the BaySys group of projects. Challenges remain for modeling the most northern reaches of the basin, and in the lake-dominated watersheds. The techniques presented in this work, particularly the lake and flow signature clusters, may be applied to other high latitude, ungauged Arctic basins. Discharge simulations are subsequently used as input data for oceanographic, biogeochemical, and ecosystem studies across the HBDB.

  • Thompson, H. D., Thériault, J. M., Déry, S. J., Stewart, R. E., Boisvert, D., Rickard, L., Leroux, N. R., Colli, M., & Vionnet, V. (2023). Atmospheric and surface observations during the Saint John River Experiment on Cold Season Storms (SAJESS). https://doi.org/10.5194/essd-2023-59

    Abstract. The amount and phase of cold season precipitation accumulating in the upper Saint John River basin are critical factors in determining spring runoff, ice-jams, and flooding in downstream communities. To study the impact of winter and spring storms on the snowpack in the upper Saint John River (SJR) basin, the Saint John River Experiment on Cold Season Storms (SAJESS) utilized meteorological instrumentation, upper air soundings, human observations, and hydrometeor macrophotography during winter/spring 2020–21. Here, we provide an overview of the SAJESS study area, field campaign, and existing data networks surrounding the upper SJR basin. Initially, meteorological instrumentation was co-located with an Environment and Climate Change Canada station near Edmundston, New Brunswick, in early December 2020. This was followed by an intensive observation period that involved manual observations, upper-air soundings, a multi-angle snowflake camera, macrophotography of solid hydrometeors, and advanced automated instrumentation throughout March and April 2021. The resulting datasets include optical disdrometer size and velocity distributions of hydrometeors, micro rain radar output, near-surface meteorological observations, and wind speed, temperature, pressure and precipitation amounts from a K63 Hotplate precipitation gauge, the first one operating in Canada. These data are publicly available from the Federated Research Data Repository at https://doi.org/10.20383/103.0591 (Thompson et al., 2022). We also include a synopsis of the data management plan and data processing, and a brief assessment of the rewards and challenges of utilizing community volunteers for hydro-meteorological citizen science.

    Consulter sur essd.copernicus.org
  • Kushner, P. J., Mudryk, L., Merryfield, W. J., Ambadan, J. T., Berg, A. A., Bichet, A., Brown, R., Derksen, C., Déry, S. J., Dirkson, A., Flato, G., Fletcher, C. G., Fyfe, J. C., Gillett, N. P., Haas, C., Howell, S. E. L., Laliberté, F., McCusker, K. E., Sigmond, M., … Zwiers, F. W. (2018). Canadian snow and sea ice: assessment of snow, sea ice, and related climate processes in Canada’s Earth system model and climate-prediction system. The Cryosphere, 12(4). https://doi.org/10.5194/tc-12-1137-2018

    The Canadian Sea Ice and Snow Evolution (CanSISE) Network is a climate research network focused on developing and applying state-of-the-art observational data to advance dynamical prediction, projections, and understanding of seasonal snow cover and sea ice in Canada and the circumpolar Arctic. This study presents an assessment from the CanSISE Network of the ability of the second-generation Canadian Earth System Model (CanESM2) and the Canadian Seasonal to Interannual Prediction System (CanSIPS) to simulate and predict snow and sea ice from seasonal to multi-decadal timescales, with a focus on the Canadian sector. To account for observational uncertainty, model structural uncertainty, and internal climate variability, the analysis uses multi-source observations, multiple Earth system models (ESMs) in Phase5 of the Coupled Model Intercomparison Project (CMIP5), and large initial-condition ensembles of CanESM2 and other models. It is found that the ability of the CanESM2 simulation to capture snow-related climate parameters, such as cold-region surface temperature and precipitation, lies within the range of currently available international models. Accounting for the considerable disagreement among satellite-era observational datasets on the distribution of snow water equivalent, CanESM2 has too much springtime snow mass over Canada, reflecting a broader northern hemispheric positive bias. Biases in seasonal snow cover extent are generally less pronounced. CanESM2 also exhibits retreat of springtime snow generally greater than observational estimates, after accounting for observational uncertainty and internal variability. Sea ice is biased low in the Canadian Arctic, which makes it difficult to assess the realism of long-term sea ice trends there. The strengths and weaknesses of the modelling system need to be understood as a practical tradeoff: the Canadian models are relatively inexpensive computationally because of their moderate resolution, thus enabling their use in operational seasonal prediction and for generating large ensembles of multidecadal simulations. Improvements in climate-prediction systems like CanSIPS rely not just on simulation quality but also on using novel observational constraints and the ready transfer of research to an operational setting. Improvements in seasonal forecasting practice arising from recent research include accurate initialization of snow and frozen soil, accounting for observational uncertainty in forecast verification, and sea ice thickness initialization using statistical predictors available in real time.

RIS

Format recommandé pour la plupart des logiciels de gestion de références bibliographiques

BibTeX

Format recommandé pour les logiciels spécialement conçus pour BibTeX

Flux web personnalisé
Dernière mise à jour depuis la base de données : 2025-06-18 06 h 30 (UTC)

Explorer

Axes du RIISQ

  • 1 - aléas, vulnérabilités et exposition (1)

Lieux

  • Canada (hors-Québec) (6)
  • États-Unis (1)

Secteurs et disciplines

  • Nature et Technologie (2)

Types d'événements extrêmes

  • Évènements liés au froid (neige, glace) (2)
  • Inondations et crues (1)

Type de ressource

  • Article de revue (10)

Année de publication

  • Entre 2000 et 2025
    • Entre 2010 et 2019 (5)
      • 2016 (2)
      • 2018 (2)
      • 2019 (1)
    • Entre 2020 et 2025 (5)
      • 2020 (2)
      • 2023 (1)
      • 2024 (1)
      • 2025 (1)

Langue de la ressource

  • Anglais (1)

Explorer

UQAM - Université du Québec à Montréal

  • Veille bibliographique sur les inondations
  • bibliotheques@uqam.ca

Accessibilité Web