Accéder au contenu Accéder au menu principal Accéder à la recherche
Accéder au contenu Accéder au menu principal
UQAM logo
Page d'accueil de l'UQAM Étudier à l'UQAM Bottin du personnel Carte du campus Bibliothèques Pour nous joindre

Service des bibliothèques

Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
UQAM logo
Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
  • Bibliographie
  • Accueil
  1. Vitrine des bibliographies
  2. Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
  3. Résultats
  • Accueil

Votre recherche

Réinitialiser la recherche

Aide

L’interface de recherche est composée de trois sections : Rechercher, Explorer et Résultats. Celles-ci sont décrites en détail ci-dessous.

Vous pouvez lancer une recherche aussi bien à partir de la section Rechercher qu’à partir de la section Explorer.

Rechercher

Cette section affiche vos critères de recherche courants et vous permet de soumettre des mots-clés à chercher dans la bibliographie.

  • Chaque nouvelle soumission ajoute les mots-clés saisis à la liste des critères de recherche.
  • Pour lancer une nouvelle recherche plutôt qu’ajouter des mots-clés à la recherche courante, utilisez le bouton Réinitialiser la recherche, puis entrez vos mots-clés.
  • Pour remplacer un mot-clé déjà soumis, veuillez d’abord le retirer en décochant sa case à cocher, puis soumettre un nouveau mot-clé.
  • Vous pouvez contrôler la portée de votre recherche en choisissant où chercher. Les options sont :
    • Partout : repère vos mots-clés dans tous les champs des références bibliographiques ainsi que dans le contenu textuel des documents disponibles.
    • Dans les auteurs ou contributeurs : repère vos mots-clés dans les noms d’auteurs ou de contributeurs.
    • Dans les titres : repère vos mots-clés dans les titres.
    • Dans tous les champs : repère vos mots-clés dans tous les champs des notices bibliographiques.
    • Dans les documents : repère vos mots-clés dans le contenu textuel des documents disponibles.
  • Vous pouvez utiliser les opérateurs booléens avec vos mots-clés :
    • ET : repère les références qui contiennent tous les termes fournis. Ceci est la relation par défaut entre les termes séparés d’un espace. Par exemple, a b est équivalent à a ET b.
    • OU : repère les références qui contiennent n’importe lequel des termes fournis. Par exemple, a OU b.
    • SAUF : exclut les références qui contiennent le terme fourni. Par exemple, SAUF a.
    • Les opérateurs booléens doivent être saisis en MAJUSCULES.
  • Vous pouvez faire des groupements logiques (avec les parenthèses) pour éviter les ambiguïtés lors de la combinaison de plusieurs opérateurs booléens. Par exemple, (a OU b) ET c.
  • Vous pouvez demander une séquence exacte de mots (avec les guillemets droits), par exemple "a b c". Par défaut la différence entre les positions des mots est de 1, ce qui signifie qu’une référence sera repérée si elle contient les mots et qu’ils sont consécutifs. Une distance maximale différente peut être fournie (avec le tilde), par exemple "a b"~2 permet jusqu’à un terme entre a et b, ce qui signifie que la séquence a c b pourrait être repérée aussi bien que a b.
  • Vous pouvez préciser que certains termes sont plus importants que d’autres (avec l’accent circonflexe). Par exemple, a^2 b c^0.5 indique que a est deux fois plus important que b dans le calcul de pertinence des résultats, tandis que c est de moitié moins important. Ce type de facteur peut être appliqué à un groupement logique, par exemple (a b)^3 c.
  • La recherche par mots-clés est insensible à la casse et les accents et la ponctuation sont ignorés.
  • Les terminaisons des mots sont amputées pour la plupart des champs, tels le titre, le résumé et les notes. L’amputation des terminaisons vous évite d’avoir à prévoir toutes les formes possibles d’un mot dans vos recherches. Ainsi, les termes municipal, municipale et municipaux, par exemple, donneront tous le même résultat. L’amputation des terminaisons n’est pas appliquée au texte des champs de noms, tels auteurs/contributeurs, éditeur, publication.

Explorer

Cette section vous permet d’explorer les catégories associées aux références.

  • Les catégories peuvent servir à affiner votre recherche. Cochez une catégorie pour l’ajouter à vos critères de recherche. Les résultats seront alors restreints aux références qui sont associées à cette catégorie.
  • Dé-cochez une catégorie pour la retirer de vos critères de recherche et élargir votre recherche.
  • Les nombres affichés à côté des catégories indiquent combien de références sont associées à chaque catégorie considérant les résultats de recherche courants. Ces nombres varieront en fonction de vos critères de recherche, de manière à toujours décrire le jeu de résultats courant. De même, des catégories et des facettes entières pourront disparaître lorsque les résultats de recherche ne contiennent aucune référence leur étant associées.
  • Une icône de flèche () apparaissant à côté d’une catégorie indique que des sous-catégories sont disponibles. Vous pouvez appuyer sur l’icône pour faire afficher la liste de ces catégories plus spécifiques. Par la suite, vous pouvez appuyer à nouveau pour masquer la liste. L’action d’afficher ou de masquer les sous-catégories ne modifie pas vos critères de recherche; ceci vous permet de rapidement explorer l’arborescence des catégories, si désiré.

Résultats

Cette section présente les résultats de recherche. Si aucun critère de recherche n’a été fourni, elle montre toute la bibliographie (jusqu’à 20 références par page).

  • Chaque référence de la liste des résultats est un hyperlien vers sa notice bibliographique complète. À partir de la notice, vous pouvez continuer à explorer les résultats de recherche en naviguant vers les notices précédentes ou suivantes de vos résultats de recherche, ou encore retourner à la liste des résultats.
  • Des hyperliens supplémentaires, tels que Consulter le document ou Consulter sur [nom d’un site web], peuvent apparaître sous un résultat de recherche. Ces liens vous fournissent un accès rapide à la ressource, des liens que vous trouverez également dans la notice bibliographique.
  • Le bouton Résumés vous permet d’activer ou de désactiver l’affichage des résumés dans la liste des résultats de recherche. Toutefois, activer l’affichage des résumés n’aura aucun effet sur les résultats pour lesquels aucun résumé n’est disponible.
  • Diverses options sont fournies pour permettre de contrôler l’ordonnancement les résultats de recherche. L’une d’elles est l’option de tri par Pertinence, qui classe les résultats du plus pertinent au moins pertinent. Le score utilisé à cette fin prend en compte la fréquence des mots ainsi que les champs dans lesquels ils apparaissent. Par exemple, si un terme recherché apparaît fréquemment dans une référence ou est l’un d’un très petit nombre de termes utilisé dans cette référence, cette référence aura probablement un score plus élevé qu’une autre où le terme apparaît moins fréquemment ou qui contient un très grand nombre de mots. De même, le score sera plus élevé si un terme est rare dans l’ensemble de la bibliographie que s’il est très commun. De plus, si un terme de recherche apparaît par exemple dans le titre d’une référence, le score de cette référence sera plus élevé que s’il apparaissait dans un champ moins important tel le résumé.
  • Le tri par Pertinence n’est disponible qu’après avoir soumis des mots-clés par le biais de la section Rechercher.
  • Les catégories sélectionnées dans la section Explorer n’ont aucun effet sur le tri par pertinence. Elles ne font que filtrer la liste des résultats.
Type de ressource
  • Prépublication
Année de publication
  • Entre 2000 et 2025

Résultats 9 ressources

Date décroissanteDate croissanteAuteur A-ZAuteur Z-ATitre A-ZTitre Z-A
Résumés
  • Bertoncini, A., Pomeroy, J. W., & Thériault, J. M. (2024). A New GPM-DPR Algorithm to Estimate Snowfall in Mountain Regions. Preprints. https://doi.org/10.22541/essoar.171535990.06146530/v1

    Reliable precipitation forcing is essential for calculating the water balance, seasonal snowpack, glacier mass balance, streamflow, and other hydrological variables. However, satellite precipitation is often the only forcing available to run hydrological models in data-scarce regions, compromising hydrological calculations when unreliable. The IMERG product estimates precipitation quasi-globally from a combination of passive microwave and infrared satellites, which are intercalibrated based on GPM’s DPR and GMI instruments. Current GPM-DPR radar algorithms have satisfactorily estimated rainfall, but a limited consideration of PSD, attenuation correction, and ground clutter have degraded snowfall estimation, especially in mountain regions. This study aims to improve satellite radar snowfall estimates for this situation. Nearly two years (between 2019 and 2022) of aloft precipitation concentration, surface hydrometeor size, number and fall velocity, and surface precipitation rate from a high elevation site in the Canadian Rockies and collocated GPM-DPR reflectivities were used to develop a new snowfall estimation algorithm. Snowfall estimates using the new algorithm and measured GPM-DPR reflectivities were compared to other GPM-DPR-based products, including CORRA, which is employed to intercalibrate IMERG. Snowfall rates estimated with measured Ka reflectivities, and from CORRA were compared to MRR-2 observations, and had correlation, bias, and RMSE of 0.58 and 0.07, 0.43 and -0.38 mm h-1, and 0.83 and 0.85 mm h-1, respectively. Predictions using measured Ka reflectivity suggest that enhanced satellite radar snowfall estimates can be achieved using a simple measured reflectivity algorithm. These improved snowfall estimates can be adopted to intercalibrate IMERG in cold mountain regions, thereby improving regional precipitation estimates.

    Consulter sur essopenarchive.org
  • Bédard-Therrien, A., Anctil, F., Thériault, J. M., Chalifour, O., Payette, F., Vidal, A., & Nadeau, D. F. (2024). Leveraging a Disdrometer Network to Develop a Probabilistic Precipitation Phase Model in Eastern Canada. Hydrometeorology/Modelling approaches. https://doi.org/10.5194/hess-2024-78

    Abstract. This study presents a probabilistic model that partitions the precipitation phase based on hourly measurements from a network of radar-based disdrometers in eastern Canada. The network consists of 27 meteorological stations located in a boreal climate for the years 2020–2023. Precipitation phase observations showed a 2-m air temperature interval between 0–4 °C where probabilities of occurrence of solid, liquid, or mixed precipitation significantly overlapped. Single-phase precipitation was also found to occur more frequently than mixed-phase precipitation. Probabilistic phase-guided partitioning (PGP) models of increasing complexity using random forest algorithms were developed. The PGP models classified the precipitation phase and partitioned the precipitation accordingly into solid and liquid amounts. PGP_basic is based on 2-m air temperature and site elevation, while PGP_hydromet integrates relative humidity. PGP_full includes all the above data plus atmospheric reanalysis data. The PGP models were compared to benchmark precipitation phase partitioning methods. These included a single temperature threshold model set at 1.5 °C, a linear transition model with dual temperature thresholds of –0.38 and 5 °C, and a psychrometric balance model. Among the benchmark models, the single temperature threshold had the best classification performance (F1 score of 0.74) due to a low count of mixed-phase events. The other benchmark models tended to over-predict mixed-phase precipitation in order to decrease partitioning error. All PGP models showed significant phase classification improvement by reproducing the observed overlapping precipitation phases based on 2-m air temperature. PGP_hydromet and PGP_full displayed the best classification performance (F1 score of 0.84). In terms of partitioning error, PGP_full had the lowest RMSE (0.27 mm) and the least variability in performance. The RMSE of the single temperature threshold model was the highest (0.40 mm) and showed the greatest performance variability. An input variable importance analysis revealed that the additional data used in the more complex PGP models mainly improved mixed-phase precipitation prediction. The improvement of mixed-phase prediction remains a challenge. Relative humidity was deemed the least important input variable used, due to consistent near water vapor saturation conditions. Additionally, the reanalysis atmospheric data proved to be an important factor to increase the robustness of the partitioning process. This study establishes a basis for integrating automated phase observations into a hydrometeorological observation network and developing probabilistic precipitation phase models.

    Consulter sur hess.copernicus.org
  • Lachapelle, M., Cholette, M., & Thériault, J. M. (2024). Effect of Secondary Ice Production Processes on the Simulation of ice pellets using the Predicted Particle Properties microphysics scheme. Clouds and Precipitation/Atmospheric Modelling and Data Analysis/Troposphere/Physics (physical properties and processes). https://doi.org/10.5194/egusphere-2024-594

    Abstract. Ice pellets can form when supercooled raindrops collide with small ice particles that can be generated through secondary ice production processes. The use of atmospheric models that neglect these collisions can lead to an overestimation of freezing rain. The objective of this study is therefore to understand the impacts of collisional freezing and secondary ice production on simulations of ice pellets and freezing rain. We studied the properties of precipitation simulated with the microphysical scheme Predicted Particle Properties (P3) for two distinct secondary ice production processes. Possible improvements to the representation of ice pellets and ice crystals in P3 were analyzed by simulating an ice pellet storm that occurred over eastern Canada in January 2020. Those simulations showed that adding secondary ice production processes increased the accumulation of ice pellets but led to unrealistic size distributions of precipitation particles. Realistic size distributions of ice pellets were obtained by modifying the collection of rain by small ice particles and the merging criteria of ice categories in P3.

    Consulter sur egusphere.copernicus.org
  • Loriani, S., Aksenov, Y., Armstrong McKay, D., Bala, G., Born, A., Chiessi, C. M., Dijkstra, H., Donges, J. F., Drijfhout, S., England, M. H., Fedorov, A. V., Jackson, L., Kornhuber, K., Messori, G., Pausata, F., Rynders, S., Salée, J.-B., Sinha, B., Sherwood, S., … Tharammal, T. (2023). Tipping points in ocean and atmosphere circulations. Climate change/Human/Earth system interactions/Earth system and climate modeling. https://doi.org/10.5194/egusphere-2023-2589

    Abstract. In this review, we assess scientific evidence for tipping points in ocean and atmosphere circulations. The warming of oceans, modified wind patterns and increasing freshwater influx from melting ice hold the potential to disrupt established circulation patterns. The literature provides evidence for oceanic tipping points in the Atlantic Meridional Overturning Circulation (AMOC), the North Atlantic Subpolar Gyre (SPG), and the Antarctic Overturning Circulation, which may collapse under warmer and ‘fresher’ (i.e. less salty) conditions. A slowdown or collapse of these oceanic circulations would have far-reaching consequences for the rest of the climate system and could lead to strong impacts on human societies and the biosphere. Among the atmospheric circulation systems considered, we classify the West African monsoon as a tipping system. Its abrupt changes in the past have led to vastly different vegetation states of the Sahara (e.g. “green Sahara” states). Evidence about tipping of the monsoon systems over South America and Asia is limited however, there are multiple potential sources of destabilisation, including large-scale deforestation, air pollution, and shifts in other circulation patterns (in particular the AMOC). Although theoretically possible, there is currently little indication for tipping points in tropical clouds or mid-latitude atmospheric circulations. Similarly, tipping towards a more extreme or persistent state of the El Niño-Southern Oscillation (ENSO) is currently not fully supported by models and observations. While the tipping thresholds for many of these systems are uncertain, tipping could have severe socio-environmental consequences. Stabilising Earth’s climate (along with minimising other environmental pressures, like aerosol pollution and ecosystem degradation) is critical for reducing the likelihood of reaching tipping points in the ocean-atmosphere system.

    Consulter sur egusphere.copernicus.org
  • Deschamps, B., Boudreault, M., & Gachon, P. (2023). Contributing Factors to Residential Flood Damage in Canada. https://doi.org/10.2139/ssrn.4645910
    Consulter sur www.ssrn.com
  • Chartrand, J., & Pausata, F. S. R. (2020). Impacts of the North Atlantic Oscillation on Winter Precipitations and Storm Track Variability in Southeast Canada and Northeast US. Atmospheric teleconnections incl. stratosphere–troposphere coupling. https://doi.org/10.5194/wcd-2020-20

    Abstract. The North Atlantic Oscillation (NAO) affects atmospheric variability from eastern North America to Europe. Although the link between the NAO and winter precipitations in the eastern North America have been the focus of previous work, only few studies have hitherto provided clear physical explanations on these relationships. In this study we revisit and extend the analysis of the effect of the NAO on winter precipitations over a large domain covering southeast Canada and the northeastern United States. Furthermore, here we use the recent ERA5 reanalysis dataset (1979–2018), which currently has the highest available horizontal resolution for a global reanalysis (0.25°), to track extratropical cyclones to delve into the physical processes behind the relationship between NAO and precipitation, snowfall, snowfall-to-precipitation ratio (S/P), and snow cover depth anomalies in the region. In particular, our results show that positive NAO phases are associated with less snowfall over a wide region covering Nova Scotia, New England and the Mid-Atlantic of the United States relative to negative NAO phases. Henceforth, a significant negative correlation is also seen between S/P and the NAO over this region. This is due to a decrease (increase) in cyclogenesis of coastal storms near the United States east coast during positive (negative) NAO phases, as well as a northward (southward) displacement of the mean storm track over North America.

    Consulter sur wcd.copernicus.org
  • Stewart, R. E., Szeto, K. K., Bonsal, B. R., Hanesiak, J. M., Kochtubajda, B., Li, Y., Thériault, J. M., DeBeer, C. M., Tam, B. Y., Li, Z., Liu, Z., Bruneau, J. A., Marinier, S., & Matte, D. (2019). A Review and Synthesis of Future Earth System Change in theInterior of Western Canada: Part I – Climate and Meteorology. Hydrometeorology/Modelling approaches. https://doi.org/10.5194/hess-2019-51

    Abstract. The Interior of Western Canada, up to and including the Arctic, has experienced rapid change in its climate, hydrology, cryosphere and ecosystems and this is expected to continue. Although there is general consensus that warming will occur in the future, many critical issues remain. In this first of two articles, attention is placed on atmospheric-related issues that range from large scales down to individual precipitation events. Each of these is considered in terms of expected change organized by season and utilizing climate scenario information as well as thermodynamically-driven future climatic forcing simulations. Large scale atmospheric circulations affecting this region are generally projected to become stronger in each season and, coupled with warming temperatures, lead to enhancements of numerous water-related and temperature-related extremes. These include winter snowstorms, freezing rain, drought as well as atmospheric forcing of spring floods although not necessarily summer convection. Collective insights of these atmospheric findings are summarized in a consistent, connected physical framework.

    Consulter sur hess.copernicus.org
  • Nicolle, M., Debret, M., Massei, N., Colin, C., deVernal, A., Divine, D., Werner, J. P., Hormes, A., Korhola, A., & Linderholm, H. W. (2017). Climate variability in subarctic area for the last two millennia. Feedback and Forcing/Ice Cores/Holocene. https://doi.org/10.5194/cp-2017-33

    Abstract. To put in perspective the recent climate change, it is necessary to extend the instrumental climate records with proxy data from palaeoclimate archives. Arctic climate variability for the last two millennia has been investigated using statistical and signal analyses from three regionally averaged records from the North Atlantic, Siberia and Alaska based on many sort of proxy data archived in the Arctic 2k database. In the North Atlantic and Alaska areas, the major climatic trend is characterized by long-term cooling interrupted by the recent warming that started at the beginning of the 19th century. This cooling trend is not clearly visible in the Siberian region. The Little Ice Age (LIA) was identified from the individual series and is characterized by an important spatial and temporal expression of climate variability. It started at the earliest by around 1200 AD and ended at the latest in the middle of the 20th century. The large spread temporal coverage of LIA did not show regional consistency or particular spatial distribution and did not show relationship with archive/proxy type either. A focus on the last two centuries shows a recent warming characterized by a well-marked warming trend paralleling with increasing greenhouse gas emissions. It also shows a multi-decadal variability likely due to natural processes acting on the internal climate system variability at regional scale. A 16–30 years cycle is found in Alaska and seems to be linked to the Pacific Decadal Oscillation (PDO) whereas ~ 20–30 and ~ 50–90 years periodicities characterize the North Atlantic climate regime, likely in relation with the Atlantic Multidecadal Oscillation (AMO). These regional features are apparently linked to the sea-ice cover fluctuations through ice-temperature positive feedback.

    Consulter sur cp.copernicus.org
  • Huntzinger, D. N., Schwalm, C., Michalak, A. M., Schaefer, K., King, A. W., Wei, Y., Jacobson, A., Liu, S., Cook, R. B., Post, W. M., Berthier, G., Hayes, D., Huang, M., Ito, A., Lei, H., Lu, C., Mao, J., Peng, C. H., Peng, S., … Zhu, Q. (2013). The North American Carbon Program Multi-scale synthesis and Terrestrial Model Intercomparison Project – Part 1: Overview and experimental design. Biogeosciences. https://doi.org/10.5194/gmdd-6-3977-2013

    Abstract. Terrestrial biosphere models (TBMs) have become an integral tool for extrapolating local observations and understanding of land-atmosphere carbon exchange to larger regions. The North American Carbon Program (NACP) Multi-scale synthesis and Terrestrial Model Intercomparison Project (MsTMIP) is a formal model intercomparison and evaluation effort focused on improving the diagnosis and attribution of carbon exchange at regional and global scales. MsTMIP builds upon current and past synthesis activities, and has a unique framework designed to isolate, interpret, and inform understanding of how model structural differences impact estimates of carbon uptake and release. Here we provide an overview of the MsTMIP effort and describe how the MsTMIP experimental design enables the assessment and quantification of TBM structural uncertainty. Model structure refers to the types of processes considered (e.g. nutrient cycling, disturbance, lateral transport of carbon), and how these processes are represented (e.g. photosynthetic formulation, temperature sensitivity, respiration) in the models. By prescribing a common experimental protocol with standard spin-up procedures and driver data sets, we isolate any biases and variability in TBM estimates of regional and global carbon budgets resulting from differences in the models themselves (i.e. model structure) and model-specific parameter values. An initial intercomparison of model structural differences is represented using hierarchical cluster diagrams (a.k.a. dendrograms), which highlight similarities and differences in how models account for carbon cycle, vegetation, energy, and nitrogen cycle dynamics. We show that, despite the standardized protocol used to derive initial conditions, models show a high degree of variation for GPP, total living biomass, and total soil carbon, underscoring the influence of differences in model structure and parameterization on model estimates.

    Consulter sur gmd.copernicus.org
RIS

Format recommandé pour la plupart des logiciels de gestion de références bibliographiques

BibTeX

Format recommandé pour les logiciels spécialement conçus pour BibTeX

Flux web personnalisé
Dernière mise à jour depuis la base de données : 07/06/2025 05:00 (UTC)

Explorer

Auteur·e·s

  • Boudreault, Mathieu (1)
  • De Vernal, Anne (1)
  • Pausata, Francesco S.R. (2)
  • Peng, Changhui (1)
  • Thériault, Julie M. (4)

Type de ressource

  • Prépublication

Année de publication

  • Entre 2000 et 2025
    • Entre 2010 et 2019 (3)
      • 2013 (1)
      • 2017 (1)
      • 2019 (1)
    • Entre 2020 et 2025 (6)
      • 2020 (1)
      • 2023 (2)
      • 2024 (3)

Explorer

UQAM - Université du Québec à Montréal

  • Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
  • bibliotheques@uqam.ca

Accessibilité Web