Accéder au contenu Accéder au menu principal Accéder à la recherche
Accéder au contenu Accéder au menu principal
UQAM logo
Page d'accueil de l'UQAM Étudier à l'UQAM Bottin du personnel Carte du campus Bibliothèques Pour nous joindre

Service des bibliothèques

Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
UQAM logo
Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
  • Bibliographie
  • Accueil
  1. Vitrine des bibliographies
  2. Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
  3. Résultats
  • Accueil

Votre recherche

Réinitialiser la recherche

Aide

L’interface de recherche est composée de trois sections : Rechercher, Explorer et Résultats. Celles-ci sont décrites en détail ci-dessous.

Vous pouvez lancer une recherche aussi bien à partir de la section Rechercher qu’à partir de la section Explorer.

Rechercher

Cette section affiche vos critères de recherche courants et vous permet de soumettre des mots-clés à chercher dans la bibliographie.

  • Chaque nouvelle soumission ajoute les mots-clés saisis à la liste des critères de recherche.
  • Pour lancer une nouvelle recherche plutôt qu’ajouter des mots-clés à la recherche courante, utilisez le bouton Réinitialiser la recherche, puis entrez vos mots-clés.
  • Pour remplacer un mot-clé déjà soumis, veuillez d’abord le retirer en décochant sa case à cocher, puis soumettre un nouveau mot-clé.
  • Vous pouvez contrôler la portée de votre recherche en choisissant où chercher. Les options sont :
    • Partout : repère vos mots-clés dans tous les champs des références bibliographiques ainsi que dans le contenu textuel des documents disponibles.
    • Dans les auteurs ou contributeurs : repère vos mots-clés dans les noms d’auteurs ou de contributeurs.
    • Dans les titres : repère vos mots-clés dans les titres.
    • Dans tous les champs : repère vos mots-clés dans tous les champs des notices bibliographiques.
    • Dans les documents : repère vos mots-clés dans le contenu textuel des documents disponibles.
  • Vous pouvez utiliser les opérateurs booléens avec vos mots-clés :
    • ET : repère les références qui contiennent tous les termes fournis. Ceci est la relation par défaut entre les termes séparés d’un espace. Par exemple, a b est équivalent à a ET b.
    • OU : repère les références qui contiennent n’importe lequel des termes fournis. Par exemple, a OU b.
    • SAUF : exclut les références qui contiennent le terme fourni. Par exemple, SAUF a.
    • Les opérateurs booléens doivent être saisis en MAJUSCULES.
  • Vous pouvez faire des groupements logiques (avec les parenthèses) pour éviter les ambiguïtés lors de la combinaison de plusieurs opérateurs booléens. Par exemple, (a OU b) ET c.
  • Vous pouvez demander une séquence exacte de mots (avec les guillemets droits), par exemple "a b c". Par défaut la différence entre les positions des mots est de 1, ce qui signifie qu’une référence sera repérée si elle contient les mots et qu’ils sont consécutifs. Une distance maximale différente peut être fournie (avec le tilde), par exemple "a b"~2 permet jusqu’à un terme entre a et b, ce qui signifie que la séquence a c b pourrait être repérée aussi bien que a b.
  • Vous pouvez préciser que certains termes sont plus importants que d’autres (avec l’accent circonflexe). Par exemple, a^2 b c^0.5 indique que a est deux fois plus important que b dans le calcul de pertinence des résultats, tandis que c est de moitié moins important. Ce type de facteur peut être appliqué à un groupement logique, par exemple (a b)^3 c.
  • La recherche par mots-clés est insensible à la casse et les accents et la ponctuation sont ignorés.
  • Les terminaisons des mots sont amputées pour la plupart des champs, tels le titre, le résumé et les notes. L’amputation des terminaisons vous évite d’avoir à prévoir toutes les formes possibles d’un mot dans vos recherches. Ainsi, les termes municipal, municipale et municipaux, par exemple, donneront tous le même résultat. L’amputation des terminaisons n’est pas appliquée au texte des champs de noms, tels auteurs/contributeurs, éditeur, publication.

Explorer

Cette section vous permet d’explorer les catégories associées aux références.

  • Les catégories peuvent servir à affiner votre recherche. Cochez une catégorie pour l’ajouter à vos critères de recherche. Les résultats seront alors restreints aux références qui sont associées à cette catégorie.
  • Dé-cochez une catégorie pour la retirer de vos critères de recherche et élargir votre recherche.
  • Les nombres affichés à côté des catégories indiquent combien de références sont associées à chaque catégorie considérant les résultats de recherche courants. Ces nombres varieront en fonction de vos critères de recherche, de manière à toujours décrire le jeu de résultats courant. De même, des catégories et des facettes entières pourront disparaître lorsque les résultats de recherche ne contiennent aucune référence leur étant associées.
  • Une icône de flèche () apparaissant à côté d’une catégorie indique que des sous-catégories sont disponibles. Vous pouvez appuyer sur l’icône pour faire afficher la liste de ces catégories plus spécifiques. Par la suite, vous pouvez appuyer à nouveau pour masquer la liste. L’action d’afficher ou de masquer les sous-catégories ne modifie pas vos critères de recherche; ceci vous permet de rapidement explorer l’arborescence des catégories, si désiré.

Résultats

Cette section présente les résultats de recherche. Si aucun critère de recherche n’a été fourni, elle montre toute la bibliographie (jusqu’à 20 références par page).

  • Chaque référence de la liste des résultats est un hyperlien vers sa notice bibliographique complète. À partir de la notice, vous pouvez continuer à explorer les résultats de recherche en naviguant vers les notices précédentes ou suivantes de vos résultats de recherche, ou encore retourner à la liste des résultats.
  • Des hyperliens supplémentaires, tels que Consulter le document ou Consulter sur [nom d’un site web], peuvent apparaître sous un résultat de recherche. Ces liens vous fournissent un accès rapide à la ressource, des liens que vous trouverez également dans la notice bibliographique.
  • Le bouton Résumés vous permet d’activer ou de désactiver l’affichage des résumés dans la liste des résultats de recherche. Toutefois, activer l’affichage des résumés n’aura aucun effet sur les résultats pour lesquels aucun résumé n’est disponible.
  • Diverses options sont fournies pour permettre de contrôler l’ordonnancement les résultats de recherche. L’une d’elles est l’option de tri par Pertinence, qui classe les résultats du plus pertinent au moins pertinent. Le score utilisé à cette fin prend en compte la fréquence des mots ainsi que les champs dans lesquels ils apparaissent. Par exemple, si un terme recherché apparaît fréquemment dans une référence ou est l’un d’un très petit nombre de termes utilisé dans cette référence, cette référence aura probablement un score plus élevé qu’une autre où le terme apparaît moins fréquemment ou qui contient un très grand nombre de mots. De même, le score sera plus élevé si un terme est rare dans l’ensemble de la bibliographie que s’il est très commun. De plus, si un terme de recherche apparaît par exemple dans le titre d’une référence, le score de cette référence sera plus élevé que s’il apparaissait dans un champ moins important tel le résumé.
  • Le tri par Pertinence n’est disponible qu’après avoir soumis des mots-clés par le biais de la section Rechercher.
  • Les catégories sélectionnées dans la section Explorer n’ont aucun effet sur le tri par pertinence. Elles ne font que filtrer la liste des résultats.
Type de ressource
  • Article de revue

Résultats 836 ressources

Date décroissanteDate croissanteAuteur A-ZAuteur Z-ATitre A-ZTitre Z-A
  • 1
  • ...
  • 36
  • 37
  • 38
  • 39
  • 40
  • ...
  • 42
  • Page 38 de 42
Résumés
  • Peng, C., Guiot, J., Wu, H., Jiang, H., & Luo, Y. (2011). Integrating models with data in ecology and palaeoecology: advances towards a model-data fusion approach: Model-data fusion in ecology. Ecology Letters, 14(5), 522–536. https://doi.org/10.1111/j.1461-0248.2011.01603.x
    Consulter sur onlinelibrary.wiley.com
  • Peng, C., Ma, Z., Lei, X., Zhu, Q., Chen, H., Wang, W., Liu, S., Li, W., Fang, X., & Zhou, X. (2011). A drought-induced pervasive increase in tree mortality across Canada’s boreal forests. Nature Climate Change, 1(9), 467–471. https://doi.org/10.1038/nclimate1293
    Consulter sur www.nature.com
  • Song, X., Jiang, H., Zhang, H., Peng, C., & Yu, S. (2011). Elevated UV-B radiation did not affect decomposition rates of needles of two coniferous species in subtropical China. European Journal of Soil Biology, 47(6), 343–348. https://doi.org/10.1016/j.ejsobi.2011.08.008
    Consulter sur linkinghub.elsevier.com
  • Song, X., Zhou, G., Jiang, H., Yu, S., Fu, J., Li, W., Wang, W., Ma, Z., & Peng, C. (2011). Carbon sequestration by Chinese bamboo forests and their ecological benefits: assessment of potential, problems, and future challenges. Environmental Reviews, 19(NA), 418–428. https://doi.org/10.1139/a11-015
    Consulter sur www.nrcresearchpress.com
  • Wang, W., Peng, C., Zhang, S. Y., Zhou, X., Larocque, G. R., Kneeshaw, D. D., & Lei, X. (2011). Development of TRIPLEX-Management model for simulating the response of forest growth to pre-commercial thinning. Ecological Modelling, 222(14), 2249–2261. https://doi.org/10.1016/j.ecolmodel.2010.09.019
    Consulter sur linkinghub.elsevier.com
  • Wang, Y., Xu, H., Wu, X., Zhu, Y., Gu, B., Niu, X., Liu, A., Peng, C., Ge, Y., & Chang, J. (2011). Quantification of net carbon flux from plastic greenhouse vegetable cultivation: A full carbon cycle analysis. Environmental Pollution, 159(5), 1427–1434. https://doi.org/10.1016/j.envpol.2010.12.031
    Consulter sur linkinghub.elsevier.com
  • Xiang, W., Liu, S., Deng, X., Shen, A., Lei, X., Tian, D., Zhao, M., & Peng, C. (2011). General allometric equations and biomass allocation of Pinus massoniana trees on a regional scale in southern China. Ecological Research, 26(4), 697–711. https://doi.org/10.1007/s11284-011-0829-0

    Abstract Applying allometric equations in combination with forest inventory data is an effective approach to use when qualifying forest biomass and carbon storage on a regional scale. The objectives of this study were to (1) develop general allometric tree component biomass equations and (2) investigate tree biomass allocation patterns for Pinus massoniana , a principal tree species native to southern China, by applying 197 samples across 20 site locations. The additive allometric equations utilized to compute stem, branch, needle, root, aboveground, and total tree biomass were developed by nonlinear seemingly unrelated regression. Results show that the relative proportion of stem biomass to tree biomass increased while the contribution of canopy biomass to tree biomass decreased as trees continued to grow through time. Total root biomass was a large biomass pool in itself, and its relative proportion to tree biomass exhibited a slight increase with tree growth. Although equations employing stem diameter at breast height (dbh) alone as a predictor could accurately predict stem, aboveground, root, and total tree biomass, they were poorly fitted to predict the canopy biomass component. The inclusion of the tree height ( H ) variable either slightly improved or did not in any way increase model fitness. Validation results demonstrate that these equations are suitable to estimate stem, aboveground, and total tree biomass across a broad range of P . massoniana stands on a regional scale.

    Consulter sur esj-journals.onlinelibrary.wiley.com
  • Zhu, Q., Jiang, H., Peng, C., Liu, J., Wei, X., Fang, X., Liu, S., Zhou, G., & Yu, S. (2011). Evaluating the effects of future climate change and elevated CO2 on the water use efficiency in terrestrial ecosystems of China. Ecological Modelling, 222(14), 2414–2429. https://doi.org/10.1016/j.ecolmodel.2010.09.035
    Consulter sur linkinghub.elsevier.com
  • Grenier, P., & Blanchet, J. (2010). Investigation of the sulphate‐induced freezing inhibition effect from CloudSat and CALIPSO measurements. Journal of Geophysical Research: Atmospheres, 115(D22), 2010JD013905. https://doi.org/10.1029/2010JD013905

    The hypothesis according to which higher sulphate concentrations favor ice clouds made of larger ice crystals is tested using data sets from the CloudSat and Cloud‐Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellites. This is a potential consequence of the sulphate‐induced freezing inhibition (SIFI) effect, namely, the hypothesis that sulphates contribute to inhibit the onset of ice crystal formation by deactivating ice‐forming nuclei during Arctic winter. A simple index based on the backscattering at 532 nm and the color ratio from the CALIPSO lidar measurements is compared against in situ sulphate concentration time series and used as a proxy for this variable. An algorithm using the lidar data and the CloudSat radar microphysical retrievals is also developed for identifying cloud types, focusing on those supposedly favored by the SIFI effect. The analysis includes the effect of the lidar off‐nadir angle on the sulphate index and the cloud classification, the validation of the index, as well as the production of circum‐Arctic maps of the sulphate index and of the SIFI‐favored clouds fraction. The increase of the lidar off‐nadir angle is shown to cause an increase in the measured depolarization ratio and hence in the ability to detect ice crystals. The index correlates positively with both sulphates and sea salt concentrations, with a Pearson correlation coefficient ( ) varying from 0.10 to 0.42 for the different comparisons performed. Ultimate findings are the results of two correlation tests of the SIFI effect, which allow for a new outlook on its possible role in the Arctic troposphere during winter.

    Consulter sur agupubs.onlinelibrary.wiley.com
  • Thériault, J. M., Stewart, R. E., & Henson, W. (2010). On the Dependence of Winter Precipitation Types on Temperature, Precipitation Rate, and Associated Features. Journal of Applied Meteorology and Climatology, 49(7), 1429–1442. https://doi.org/10.1175/2010JAMC2321.1

    Abstract The phase of precipitation formed within the atmosphere is highly dependent on the vertical temperature profile through which it falls. In particular, several precipitation types can form in an environment with a melting layer aloft and a refreezing layer below. These precipitation types include freezing rain, ice pellets, wet snow, and slush. To examine the formation of such precipitation, a bulk microphysics scheme was used to compare the characteristics of the hydrometeors produced by the model and observed by a research aircraft flight during the 1998 ice storm near Montreal, Canada. The model reproduced several of the observed key precipitation characteristics. Sensitivity tests on the precipitation types formed during the ice storm were also performed. These tests utilized temperature profiles produced by the North American Regional Reanalysis. The results show that small variations (±0.5°C) in the temperature profiles as well as in the precipitation rate can have major impacts on the types of precipitation formed at the surface. These results impose strong requirements on the accuracy needed by prediction models.

    Consulter sur journals.ametsoc.org
  • Thériault, J. M., & Stewart, R. E. (2010). A Parameterization of the Microphysical Processes Forming Many Types of Winter Precipitation. Journal of the Atmospheric Sciences, 67(5), 1492–1508. https://doi.org/10.1175/2009JAS3224.1

    Abstract Several types of precipitation, such as freezing rain, ice pellets, and wet snow, are commonly observed during winter storms. The objective of this study is to better understand the formation of these winter precipitation types. To address this issue, detailed melting and refreezing of precipitation was added onto an existing bulk microphysics scheme. These modifications allow the formation of mixed-phase particles and these particles in turn lead to, or affect, the formation of many of the other types of precipitation. The precipitation type characteristics, such as the mass content, liquid fraction, and threshold diameters formed during a storm over St John’s, Newfoundland, Canada, are studied and compared with observations. Many of these features were reproduced by the model. Sensitivity experiments with the model were carried out to examine the dependence of precipitation characteristics in this event on thresholds of particle evolution in the new parameterization.

    Consulter sur journals.ametsoc.org
  • Andersson, C., Pausata, F. S. R., Jansen, E., Risebrobakken, B., & Telford, R. J. (2010). Holocene trends in the foraminifer record from the Norwegian Sea and the North Atlantic Ocean. Climate of the Past, 6(2), 179–193. https://doi.org/10.5194/cp-6-179-2010

    Abstract. The early to mid-Holocene thermal optimum is a well-known feature in a wide variety of paleoclimate archives from the Northern Hemisphere. Reconstructed summer temperature anomalies from across northern Europe show a clear maximum around 6000 years before present (6 ka). For the marine realm, Holocene trends in sea-surface temperature reconstructions for the North Atlantic and Norwegian Sea do not exhibit a consistent pattern of early to mid-Holocene warmth. Sea-surface temperature records based on alkenones and diatoms generally show the existence of a warm early to mid-Holocene optimum. In contrast, several foraminifer and radiolarian based temperature records from the North Atlantic and Norwegian Sea show a cool mid-Holocene anomaly and a trend towards warmer temperatures in the late Holocene. In this paper, we revisit the foraminifer record from the Vøring Plateau in the Norwegian Sea. We also compare this record with published foraminifer based temperature reconstructions from the North Atlantic and with modelled (CCSM3) upper ocean temperatures. Model results indicate that while the seasonal summer warming of the sea-surface was stronger during the mid-Holocene, sub-surface depths experienced a cooling. This hydrographic setting can explain the discrepancies between the Holocene trends exhibited by phytoplankton and zooplankton based temperature proxy records.

    Consulter sur cp.copernicus.org
  • Zhu, Q., Jiang, H., Liu, J., Wei, X., Peng, C., Fang, X., Liu, S., Zhou, G., Yu, S., & Ju, W. (2010). Evaluating the spatiotemporal variations of water budget across China over 1951–2006 using IBIS model. Hydrological Processes, 24(4), 429–445. https://doi.org/10.1002/hyp.7496

    Abstract The Integrated Biosphere Simulator is used to evaluate the spatial and temporal patterns of the crucial hydrological variables [run‐off and actual evapotranspiration (AET)] of the water balance across China for the period 1951–2006 including a precipitation analysis. Results suggest three major findings. First, simulated run‐off captured 85% of the spatial variability and 80% of the temporal variability for 85 hydrological gauges across China. The mean relative errors were within 20% for 66% of the studied stations and within 30% for 86% of the stations. The Nash–Sutcliffe coefficients indicated that the quantity pattern of run‐off was also captured acceptably except for some watersheds in southwestern and northwestern China. The possible reasons for underestimation of run‐off in the Tibetan plateau include underestimation of precipitation and uncertainties in other meteorological data due to complex topography, and simplified representations of the soil depth attribute and snow processes in the model. Second, simulated AET matched reasonably with estimated values calculated as the residual of precipitation and run‐off for watersheds controlled by the hydrological gauges. Finally, trend analysis based on the Mann–Kendall method indicated that significant increasing and decreasing patterns in precipitation appeared in the northwest part of China and the Yellow River region, respectively. Significant increasing and decreasing trends in AET were detected in the Southwest region and the Yangtze River region, respectively. In addition, the Southwest region, northern China (including the Heilongjiang, Liaohe, and Haihe Basins), and the Yellow River Basin showed significant decreasing trends in run‐off, and the Zhemin hydrological region showed a significant increasing trend. Copyright © 2009 John Wiley & Sons, Ltd.

    Consulter sur onlinelibrary.wiley.com
  • Liu, Z., Peng, C., Xiang, W., Tian, D., Deng, X., & Zhao, M. (2010). Application of artificial neural networks in global climate change and ecological research: An overview. Chinese Science Bulletin, 55(34), 3853–3863. https://doi.org/10.1007/s11434-010-4183-3
    Consulter sur link.springer.com
  • Quillet, A., Peng, C., & Garneau, M. (2010). Toward dynamic global vegetation models for simulating vegetation–climate interactions and feedbacks: recent developments, limitations, and future challenges. Environmental Reviews, 18(NA), 333–353. https://doi.org/10.1139/A10-016

    There is a lack in representation of biosphere–atmosphere interactions in current climate models. To fill this gap, one may introduce vegetation dynamics in surface transfer schemes or couple global climate models (GCMs) with vegetation dynamics models. As these vegetation dynamics models were not designed to be included in GCMs, how are the latest generation dynamic global vegetation models (DGVMs) suitable for use in global climate studies? This paper reviews the latest developments in DGVM modelling as well as the development of DGVM–GCM coupling in the framework of global climate studies. Limitations of DGVM and coupling are shown and the challenges of these methods are highlighted. During the last decade, DGVMs underwent major changes in the representation of physical and biogeochemical mechanisms such as photosynthesis and respiration processes as well as in the representation of regional properties of vegetation. However, several limitations such as carbon and nitrogen cycles, competition, land-use and land-use changes, and disturbances have been identified. In addition, recent advances in model coupling techniques allow the simulation of the vegetation–atmosphere interactions in GCMs with the help of DGVMs. Though DGVMs represent a good alternative to investigate vegetation–atmosphere interactions at a large scale, some weaknesses in evaluation methodology and model design need to be further investigated to improve the results.

    Consulter sur www.nrcresearchpress.com
  • Schwalm, C. R., Williams, C. A., Schaefer, K., Anderson, R., Arain, M. A., Baker, I., Barr, A., Black, T. A., Chen, G., Chen, J. M., Ciais, P., Davis, K. J., Desai, A., Dietze, M., Dragoni, D., Fischer, M. L., Flanagan, L. B., Grant, R., Gu, L., … Verma, S. B. (2010). A model‐data intercomparison of CO2 exchange across North America: Results from the North American Carbon Program site synthesis. Journal of Geophysical Research: Biogeosciences, 115(G3), 2009JG001229. https://doi.org/10.1029/2009JG001229

    Our current understanding of terrestrial carbon processes is represented in various models used to integrate and scale measurements of CO 2 exchange from remote sensing and other spatiotemporal data. Yet assessments are rarely conducted to determine how well models simulate carbon processes across vegetation types and environmental conditions. Using standardized data from the North American Carbon Program we compare observed and simulated monthly CO 2 exchange from 44 eddy covariance flux towers in North America and 22 terrestrial biosphere models. The analysis period spans ∼220 site‐years, 10 biomes, and includes two large‐scale drought events, providing a natural experiment to evaluate model skill as a function of drought and seasonality. We evaluate models' ability to simulate the seasonal cycle of CO 2 exchange using multiple model skill metrics and analyze links between model characteristics, site history, and model skill. Overall model performance was poor; the difference between observations and simulations was ∼10 times observational uncertainty, with forested ecosystems better predicted than nonforested. Model‐data agreement was highest in summer and in temperate evergreen forests. In contrast, model performance declined in spring and fall, especially in ecosystems with large deciduous components, and in dry periods during the growing season. Models used across multiple biomes and sites, the mean model ensemble, and a model using assimilated parameter values showed high consistency with observations. Models with the highest skill across all biomes all used prescribed canopy phenology, calculated NEE as the difference between GPP and ecosystem respiration, and did not use a daily time step.

    Consulter sur agupubs.onlinelibrary.wiley.com
  • Tian, D., Wang, G., Yan, W., Xiang, W., & Peng, C. (2010). Soil respiration dynamics in Cinnamomum camphora forest and a nearby Liquidambar formosana forest in Subtropical China. Chinese Science Bulletin, 55(8), 736–743. https://doi.org/10.1007/s11434-009-0452-4
    Consulter sur link.springer.com
  • Zhu, B., Wang, X., Fang, J., Piao, S., Shen, H., Zhao, S., & Peng, C. (2010). Altitudinal changes in carbon storage of temperate forests on Mt Changbai, Northeast China. Journal of Plant Research, 123(4), 439–452. https://doi.org/10.1007/s10265-009-0301-1
    Consulter sur link.springer.com
  • Pausata, F. S. R., Li, C., Wettstein, J. J., Nisancioglu, K. H., & Battisti, D. S. (2009). Changes in atmospheric variability in a glacial climate and the impacts on proxy data: a model intercomparison. Climate of the Past, 5(3), 489–502. https://doi.org/10.5194/cp-5-489-2009

    Abstract. Using four different climate models, we investigate sea level pressure variability in the extratropical North Atlantic in the preindustrial climate (1750 AD) and at the Last Glacial Maximum (LGM, 21 kyrs before present) in order to understand how changes in atmospheric circulation can affect signals recorded in climate proxies. In general, the models exhibit a significant reduction in interannual variance of sea level pressure at the LGM compared to pre-industrial simulations and this reduction is concentrated in winter. For the preindustrial climate, all models feature a similar leading mode of sea level pressure variability that resembles the leading mode of variability in the instrumental record: the North Atlantic Oscillation (NAO). In contrast, the leading mode of sea level pressure variability at the LGM is model dependent, but in each model different from that in the preindustrial climate. In each model, the leading (NAO-like) mode of variability explains a smaller fraction of the variance and also less absolute variance at the LGM than in the preindustrial climate. The models show that the relationship between atmospheric variability and surface climate (temperature and precipitation) variability change in different climates. Results are model-specific, but indicate that proxy signals at the LGM may be misinterpreted if changes in the spatial pattern and seasonality of surface climate variability are not taken into account.

    Consulter sur cp.copernicus.org
  • Grenier, P., Blanchet, J., & Muñoz‐Alpizar, R. (2009). Study of polar thin ice clouds and aerosols seen by CloudSat and CALIPSO during midwinter 2007. Journal of Geophysical Research: Atmospheres, 114(D9), 2008JD010927. https://doi.org/10.1029/2008JD010927

    Data sets from CloudSat radar reflectivity and CALIPSO lidar backscattering measurements provide a new regard on Arctic and Antarctic winter cloud systems, as well as on the way aerosols determine their formation and evolution. Especially, links between the cloud ice crystal size and the surrounding aerosol field may be further investigated. In this study, the satellite observations are used to heuristically separate polar thin ice clouds into two crystal size categories, and an aerosol index based on the attenuated backscattering and color ratio of the sampled volumes is used for identifying haze in cloud‐free regions. Statistics from 386 Arctic satellite overpasses during January 2007 and from 379 overpasses over Antarctica during July 2007 reveal that sectors with the highest proportion of thin ice clouds having large ice crystals at their top are those for which the aerosol index is highest. Moreover, a weak but significant correlation between the cloud top ice effective radius and the above‐cloud aerosol index suggests that more polluted clouds tend to have higher ice effective radius, in 10 of the 11 sectors investigated. These results are interpreted in terms of a sulphate‐induced freezing inhibition effect.

    Consulter sur agupubs.onlinelibrary.wiley.com
  • 1
  • ...
  • 36
  • 37
  • 38
  • 39
  • 40
  • ...
  • 42
  • Page 38 de 42
RIS

Format recommandé pour la plupart des logiciels de gestion de références bibliographiques

BibTeX

Format recommandé pour les logiciels spécialement conçus pour BibTeX

Flux web personnalisé
Dernière mise à jour depuis la base de données : 16/06/2025 05:00 (UTC)

Explorer

Auteur·e·s

  • Blanchet, Jean-Pierre (18)
  • Boudreault, Mathieu (33)
  • De Vernal, Anne (62)
  • Di Luca, Alejandro (43)
  • Gachon, Philippe (24)
  • Grenier, Patrick (18)
  • Lucas-Picher, Philippe (44)
  • Pausata, Francesco S.R. (67)
  • Peng, Changhui (453)
  • Thériault, Julie M. (68)

Type de ressource

  • Article de revue

Année de publication

  • Entre 1900 et 1999 (13)
    • Entre 1990 et 1999 (13)
      • 1994 (1)
      • 1995 (3)
      • 1997 (1)
      • 1998 (3)
      • 1999 (5)
  • Entre 2000 et 2025 (823)
    • Entre 2000 et 2009 (65)
      • 2000 (3)
      • 2001 (3)
      • 2002 (7)
      • 2003 (4)
      • 2004 (4)
      • 2005 (4)
      • 2006 (7)
      • 2007 (8)
      • 2008 (12)
      • 2009 (13)
    • Entre 2010 et 2019 (411)
      • 2010 (10)
      • 2011 (38)
      • 2012 (26)
      • 2013 (35)
      • 2014 (40)
      • 2015 (40)
      • 2016 (55)
      • 2017 (47)
      • 2018 (48)
      • 2019 (72)
    • Entre 2020 et 2025 (347)
      • 2020 (76)
      • 2021 (77)
      • 2022 (69)
      • 2023 (75)
      • 2024 (50)

Explorer

UQAM - Université du Québec à Montréal

  • Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
  • bibliotheques@uqam.ca

Accessibilité Web