Accéder au contenu Accéder au menu principal Accéder à la recherche
Accéder au contenu Accéder au menu principal
UQAM logo
Page d'accueil de l'UQAM Étudier à l'UQAM Bottin du personnel Carte du campus Bibliothèques Pour nous joindre

Service des bibliothèques

Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
UQAM logo
Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
  • Bibliographie
  • Accueil
  1. Vitrine des bibliographies
  2. Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
  3. Résultats
  • Accueil

Votre recherche

Réinitialiser la recherche

Aide

L’interface de recherche est composée de trois sections : Rechercher, Explorer et Résultats. Celles-ci sont décrites en détail ci-dessous.

Vous pouvez lancer une recherche aussi bien à partir de la section Rechercher qu’à partir de la section Explorer.

Rechercher

Cette section affiche vos critères de recherche courants et vous permet de soumettre des mots-clés à chercher dans la bibliographie.

  • Chaque nouvelle soumission ajoute les mots-clés saisis à la liste des critères de recherche.
  • Pour lancer une nouvelle recherche plutôt qu’ajouter des mots-clés à la recherche courante, utilisez le bouton Réinitialiser la recherche, puis entrez vos mots-clés.
  • Pour remplacer un mot-clé déjà soumis, veuillez d’abord le retirer en décochant sa case à cocher, puis soumettre un nouveau mot-clé.
  • Vous pouvez contrôler la portée de votre recherche en choisissant où chercher. Les options sont :
    • Partout : repère vos mots-clés dans tous les champs des références bibliographiques ainsi que dans le contenu textuel des documents disponibles.
    • Dans les auteurs ou contributeurs : repère vos mots-clés dans les noms d’auteurs ou de contributeurs.
    • Dans les titres : repère vos mots-clés dans les titres.
    • Dans tous les champs : repère vos mots-clés dans tous les champs des notices bibliographiques.
    • Dans les documents : repère vos mots-clés dans le contenu textuel des documents disponibles.
  • Vous pouvez utiliser les opérateurs booléens avec vos mots-clés :
    • ET : repère les références qui contiennent tous les termes fournis. Ceci est la relation par défaut entre les termes séparés d’un espace. Par exemple, a b est équivalent à a ET b.
    • OU : repère les références qui contiennent n’importe lequel des termes fournis. Par exemple, a OU b.
    • SAUF : exclut les références qui contiennent le terme fourni. Par exemple, SAUF a.
    • Les opérateurs booléens doivent être saisis en MAJUSCULES.
  • Vous pouvez faire des groupements logiques (avec les parenthèses) pour éviter les ambiguïtés lors de la combinaison de plusieurs opérateurs booléens. Par exemple, (a OU b) ET c.
  • Vous pouvez demander une séquence exacte de mots (avec les guillemets droits), par exemple "a b c". Par défaut la différence entre les positions des mots est de 1, ce qui signifie qu’une référence sera repérée si elle contient les mots et qu’ils sont consécutifs. Une distance maximale différente peut être fournie (avec le tilde), par exemple "a b"~2 permet jusqu’à un terme entre a et b, ce qui signifie que la séquence a c b pourrait être repérée aussi bien que a b.
  • Vous pouvez préciser que certains termes sont plus importants que d’autres (avec l’accent circonflexe). Par exemple, a^2 b c^0.5 indique que a est deux fois plus important que b dans le calcul de pertinence des résultats, tandis que c est de moitié moins important. Ce type de facteur peut être appliqué à un groupement logique, par exemple (a b)^3 c.
  • La recherche par mots-clés est insensible à la casse et les accents et la ponctuation sont ignorés.
  • Les terminaisons des mots sont amputées pour la plupart des champs, tels le titre, le résumé et les notes. L’amputation des terminaisons vous évite d’avoir à prévoir toutes les formes possibles d’un mot dans vos recherches. Ainsi, les termes municipal, municipale et municipaux, par exemple, donneront tous le même résultat. L’amputation des terminaisons n’est pas appliquée au texte des champs de noms, tels auteurs/contributeurs, éditeur, publication.

Explorer

Cette section vous permet d’explorer les catégories associées aux références.

  • Les catégories peuvent servir à affiner votre recherche. Cochez une catégorie pour l’ajouter à vos critères de recherche. Les résultats seront alors restreints aux références qui sont associées à cette catégorie.
  • Dé-cochez une catégorie pour la retirer de vos critères de recherche et élargir votre recherche.
  • Les nombres affichés à côté des catégories indiquent combien de références sont associées à chaque catégorie considérant les résultats de recherche courants. Ces nombres varieront en fonction de vos critères de recherche, de manière à toujours décrire le jeu de résultats courant. De même, des catégories et des facettes entières pourront disparaître lorsque les résultats de recherche ne contiennent aucune référence leur étant associées.
  • Une icône de flèche () apparaissant à côté d’une catégorie indique que des sous-catégories sont disponibles. Vous pouvez appuyer sur l’icône pour faire afficher la liste de ces catégories plus spécifiques. Par la suite, vous pouvez appuyer à nouveau pour masquer la liste. L’action d’afficher ou de masquer les sous-catégories ne modifie pas vos critères de recherche; ceci vous permet de rapidement explorer l’arborescence des catégories, si désiré.

Résultats

Cette section présente les résultats de recherche. Si aucun critère de recherche n’a été fourni, elle montre toute la bibliographie (jusqu’à 20 références par page).

  • Chaque référence de la liste des résultats est un hyperlien vers sa notice bibliographique complète. À partir de la notice, vous pouvez continuer à explorer les résultats de recherche en naviguant vers les notices précédentes ou suivantes de vos résultats de recherche, ou encore retourner à la liste des résultats.
  • Des hyperliens supplémentaires, tels que Consulter le document ou Consulter sur [nom d’un site web], peuvent apparaître sous un résultat de recherche. Ces liens vous fournissent un accès rapide à la ressource, des liens que vous trouverez également dans la notice bibliographique.
  • Le bouton Résumés vous permet d’activer ou de désactiver l’affichage des résumés dans la liste des résultats de recherche. Toutefois, activer l’affichage des résumés n’aura aucun effet sur les résultats pour lesquels aucun résumé n’est disponible.
  • Diverses options sont fournies pour permettre de contrôler l’ordonnancement les résultats de recherche. L’une d’elles est l’option de tri par Pertinence, qui classe les résultats du plus pertinent au moins pertinent. Le score utilisé à cette fin prend en compte la fréquence des mots ainsi que les champs dans lesquels ils apparaissent. Par exemple, si un terme recherché apparaît fréquemment dans une référence ou est l’un d’un très petit nombre de termes utilisé dans cette référence, cette référence aura probablement un score plus élevé qu’une autre où le terme apparaît moins fréquemment ou qui contient un très grand nombre de mots. De même, le score sera plus élevé si un terme est rare dans l’ensemble de la bibliographie que s’il est très commun. De plus, si un terme de recherche apparaît par exemple dans le titre d’une référence, le score de cette référence sera plus élevé que s’il apparaissait dans un champ moins important tel le résumé.
  • Le tri par Pertinence n’est disponible qu’après avoir soumis des mots-clés par le biais de la section Rechercher.
  • Les catégories sélectionnées dans la section Explorer n’ont aucun effet sur le tri par pertinence. Elles ne font que filtrer la liste des résultats.
Année de publication
  • Entre 2000 et 2025
    • Entre 2010 et 2019

Résultats 423 ressources

Date décroissanteDate croissanteAuteur A-ZAuteur Z-ATitre A-ZTitre Z-A
  • 1
  • ...
  • 11
  • 12
  • 13
  • 14
  • 15
  • ...
  • 22
  • Page 13 de 22
Résumés
  • Pausata, F. S. R. (2015). How Do High-Latitude Volcanic Eruptions Affect Climate? Eos, 96. https://doi.org/10.1029/2015EO025757

    High-Latitude Volcanic Eruption Impacts on Climate: Filling the Gaps; Stockholm, Sweden, 5–7 November 2014

    Consulter sur eos.org
  • Zhao, L., Xiang, W., Li, J., Lei, P., Deng, X., Fang, X., & Peng, C. (2015). Effects of Topographic and Soil Factors on Woody Species Assembly in a Chinese Subtropical Evergreen Broadleaved Forest. Forests, 6(3), 650–669. https://doi.org/10.3390/f6030650

    Evergreen broadleaved forests in subtropical China contain a complicated structure of diverse species. The impact of topographic and soil factors on the assembly of woody species in the forest has been poorly understood. We used Ripley’s K(t) function to analyze the spatial patterns and associations of dominant species and residual analysis (RDA) to quantify the contribution of topography and soil to species assembly. The 1 ha plot investigated had 4797 stems with a diameter at breast height (dbh) larger than 1 cm that belong to 73 species, 55 genera, and 38 families. All stems of the entire forest and four late successional species exhibited a reversed J shape for dbh distribution, while two early successional species showed a unimodal shape. Aggregation was the major spatial pattern for entire forests and dominant species across vertical layers. Spatial associations between inter- and intra-species were mostly independent. Topographic and soil factors explained 28.1% of species assembly. The forest was close to late succession and showed the characteristics of diverse woody species, high regeneration capacity, and aggregated spatial patterns. Topographic and soil factors affected species assembly, but together they could only explain a small part of total variance.

    Consulter sur www.mdpi.com
  • Pepler, A. S., Di Luca, A., Ji, F., Alexander, L. V., Evans, J. P., & Sherwood, S. C. (2015). Impact of Identification Method on the Inferred Characteristics and Variability of Australian East Coast Lows. Monthly Weather Review, 143(3), 864–877. https://doi.org/10.1175/MWR-D-14-00188.1

    Abstract The Australian east coast low (ECL) is both a major cause of damaging severe weather and an important contributor to rainfall and dam inflow along the east coast, and is of interest to a wide range of groups including catchment managers and emergency services. For this reason, several studies in recent years have developed and interrogated databases of east coast lows using a variety of automated cyclone detection methods and identification criteria. This paper retunes each method so that all yield a similar event frequency within the ECL region, to enable a detailed intercomparison of the similarities, differences, and relative advantages of each method. All methods are shown to have substantial skill at identifying ECL events leading to major impacts or explosive development, but the choice of method significantly affects both the seasonal and interannual variation of detected ECL numbers. This must be taken into consideration in studies on trends or variability in ECLs, with a subcategorization of ECL events by synoptic situation of key importance.

    Consulter sur journals.ametsoc.org
  • Pausata, F. S. R., Gaetani, M., Messori, G., Kloster, S., & Dentener, F. J. (2015). The role of aerosol in altering North Atlantic atmospheric circulation in winter and its impact on air quality. Atmospheric Chemistry and Physics, 15(4), 1725–1743. https://doi.org/10.5194/acp-15-1725-2015

    Abstract. Numerical model scenarios of future climate depict a global increase in temperatures and changing precipitation patterns, primarily driven by increasing greenhouse gas (GHG) concentrations. Aerosol particles also play an important role by altering the Earth's radiation budget and consequently surface temperature. Here, we use the general circulation aerosol model ECHAM5-HAM, coupled to a mixed layer ocean model, to investigate the impacts of future air pollution mitigation strategies in Europe on winter atmospheric circulation over the North Atlantic. We analyse the extreme case of a maximum feasible end-of-pipe reduction of aerosols in the near future (2030), in combination with increasing GHG concentrations. Our results show a more positive North Atlantic Oscillation (NAO) mean state by 2030, together with a significant eastward shift of the southern centre of action of sea-level pressure (SLP). Moreover, we show a significantly increased blocking frequency over the western Mediterranean. By separating the impacts of aerosols and GHGs, our study suggests that future aerosol abatement may be the primary driver of both the eastward shift in the southern SLP centre of action and the increased blocking frequency over the western Mediterranean. These concomitant modifications of the atmospheric circulation over the Euro-Atlantic sector lead to more stagnant weather conditions that favour air pollutant accumulation, especially in the western Mediterranean sector. Changes in atmospheric circulation should therefore be included in future air pollution mitigation assessments. The indicator-based evaluation of atmospheric circulation changes presented in this work will allow an objective first-order assessment of the role of changes in wintertime circulation on future air quality in other climate model simulations.

    Consulter sur acp.copernicus.org
  • Chen, J., Brissette, F. P., & Lucas‐Picher, P. (2015). Assessing the limits of bias‐correcting climate model outputs for climate change impact studies. Journal of Geophysical Research: Atmospheres, 120(3), 1123–1136. https://doi.org/10.1002/2014JD022635

    Abstract Bias correction of climate model outputs has emerged as a standard procedure in most recent climate change impact studies. A crucial assumption of all bias correction approaches is that climate model biases are constant over time. The validity of this assumption has important implications for impact studies and needs to be verified to properly address uncertainty in future climate projections. Using 10 climate model simulations, this study specifically tests the bias stationarity of climate model outputs over Canada and the contiguous United States (U.S.) by comparing model outputs with corresponding observations over two 20 year historical periods (1961–1980 and 1981–2000). The results show that precipitation biases are clearly nonstationary over much of Canada and the contiguous U.S. and where they vary over much shorter time scales than those normally considered in climate change impact studies. In particular, the difference in biases over two very close periods of the recent past are, in fact, comparable to the climate change signal between future (2061–2080) and historical (1961–1980) periods for precipitation over large parts of Canada and the contiguous U.S., indicating that the uncertainty of future impacts may have been underestimated in most impact studies. In comparison, temperature bias can be considered to be approximately stationary for most of Canada and the contiguous U.S. when compared with the magnitude of the climate change signal. Given the reality that precipitation is usually considered to be more important than temperature for many impact studies, it is advisable that natural climate variability and climate model sensitivity be better emphasized in future impact studies. , Key Points Climate model biases are nonstationary over much of North America The difference in biases is comparable to the climate change signal The uncertainty of impacts may have been underestimated in most impact studies

    Consulter sur agupubs.onlinelibrary.wiley.com
  • Argüeso, D., Evans, J. P., Pitman, A. J., & Di Luca, A. (2015). Effects of City Expansion on Heat Stress under Climate Change Conditions. PLOS ONE, 10(2), e0117066. https://doi.org/10.1371/journal.pone.0117066
    Consulter sur dx.plos.org
  • Lucas-Picher, P., Riboust, P., Somot, S., & Laprise, R. (2015). Reconstruction of the Spring 2011 Richelieu River Flood by Two Regional Climate Models and a Hydrological Model. Journal of Hydrometeorology, 16(1), 36–54. https://doi.org/10.1175/JHM-D-14-0116.1

    Abstract Climate simulations made with two regional climate models (RCMs), the French Aire Limitée Adaptation Dynamique Développement International (ALADIN) and the Canadian Regional Climate Model, version 5 (CRCM5), operating on 10-km meshes for the period 1989–2011, and the Hydro-Québec hydrological model (HSAMI), are used to reconstruct the spring 2011 Richelieu River flood in the southern region of the province of Québec, Canada. The analysis shows that the simulated fields of 2-m air temperature, precipitation, and snow water equivalent by the RCMs closely match the observations with similar multiyear means and a high correlation of the monthly anomalies. The climatic conditions responsible for the 2011 flood are generally well simulated by the RCMs. The use of multidecadal RCM simulations facilitates the identification of anomalies that contributed to the flood. The flood was linked to a combination of factors: the 2010/11 winter was cold and snowy, the snowmelt in spring was fast, and there was a record amount of precipitation in April and May. Driven by outputs from the RCMs, HSAMI was able to reproduce the mean hydrograph of the Richelieu River, but it underestimated the peak of the 2011 flood. HSAMI adequately computes the water transport from the mountains to the river mouth and the storage effect of Lake Champlain, which dampens the flood over a long period. Overall, the results suggest that RCM simulations can be useful for reconstructing high-resolution climate information and providing new variables that can help better understand the causes of extreme climatic events.

    Consulter sur journals.ametsoc.org
  • Di Luca, A., Evans, J. P., Pepler, A., Alexander, L., & Argüeso, D. (2015). Resolution Sensitivity of Cyclone Climatology over Eastern Australia Using Six Reanalysis Products*. Journal of Climate, 28(24), 9530–9549. https://doi.org/10.1175/JCLI-D-14-00645.1

    Abstract The climate of the eastern seaboard of Australia is strongly influenced by the passage of low pressure systems over the adjacent Tasman Sea due to their associated precipitation and their potential to develop into extreme weather events. The aim of this study is to quantify differences in the climatology of east coast lows derived from the use of six global reanalyses. The methodology is explicitly designed to identify differences between reanalyses arising from differences in their horizontal resolution and their structure (type of forecast model, assimilation scheme, and the kind and number of observations assimilated). As a basis for comparison, reanalysis climatologies are compared with an observation-based climatology. Results show that reanalyses, specially high-resolution products, lead to very similar climatologies of the frequency, intensity, duration, and size of east coast lows when using spatially smoothed (about 300-km horizontal grid meshes) mean sea level pressure fields as input data. Moreover, at these coarse horizontal scales, monthly, interannual, and spatial variabilities appear to be very similar across the various reanalyses with a generally stronger agreement between winter events compared with summer ones. Results also show that, when looking at cyclones using reanalysis data at their native resolution (approaching 50-km grid spacing for the most recent products), uncertainties related to the frequency, intensity, and size of lows are very large and it is not clear which reanalysis, if any, gives a better description of cyclones. Further work is needed in order to evaluate the usefulness of the finescale information in modern reanalyses and to better understand the sources of their differences.

    Consulter sur journals.ametsoc.org
  • Pausata, F. S. R., Grini, A., Caballero, R., Hannachi, A., & Seland, Ø. (2015). High-latitude volcanic eruptions in the Norwegian Earth System Model: the effect of different initial conditions and of the ensemble size. Tellus B: Chemical and Physical Meteorology, 67(1), 26728. https://doi.org/10.3402/tellusb.v67.26728
    Consulter sur b.tellusjournals.se
  • Boudreault, M., Gauthier, G., & Thomassin, T. (2015). Estimation of correlations in portfolio credit risk models based on noisy security prices. Journal of Economic Dynamics and Control, 61, 334–349. https://doi.org/10.1016/j.jedc.2015.10.001
    Consulter sur linkinghub.elsevier.com
  • Caron, L.-P., Boudreault, M., & Bruyère, C. L. (2015). Changes in large-scale controls of Atlantic tropical cyclone activity with the phases of the Atlantic multidecadal oscillation. Climate Dynamics, 44(7–8), 1801–1821. https://doi.org/10.1007/s00382-014-2186-5
    Consulter sur link.springer.com
  • Colli, M., Rasmussen, R., Thériault, J. M., Lanza, L. G., Baker, C. B., & Kochendorfer, J. (2015). An Improved Trajectory Model to Evaluate the Collection Performance of Snow Gauges. Journal of Applied Meteorology and Climatology, 54(8), 1826–1836. https://doi.org/10.1175/JAMC-D-15-0035.1

    Abstract Recent studies have used numerical models to estimate the collection efficiency of solid precipitation gauges when exposed to the wind in both shielded and unshielded configurations. The models used computational fluid dynamics (CFD) simulations of the airflow pattern generated by the aerodynamic response to the gauge–shield geometry. These are used as initial conditions to perform Lagrangian tracking of solid precipitation particles. Validation of the results against field observations yielded similarities in the overall behavior, but the model output only approximately reproduced the dependence of the experimental collection efficiency on wind speed. This paper presents an improved snowflake trajectory modeling scheme due to the inclusion of a dynamically determined drag coefficient. The drag coefficient was estimated using the local Reynolds number as derived from CFD simulations within a time-independent Reynolds-averaged Navier–Stokes approach. The proposed dynamic model greatly improves the consistency of results with the field observations recently obtained at the Marshall Field winter precipitation test bed in Boulder, Colorado.

    Consulter sur journals.ametsoc.org
  • Di Luca, A., De Elía, R., & Laprise, R. (2015). Challenges in the Quest for Added Value of Regional Climate Dynamical Downscaling. Current Climate Change Reports, 1(1), 10–21. https://doi.org/10.1007/s40641-015-0003-9
    Consulter sur link.springer.com
  • Ji, F., Evans, J. P., Argueso, D., Fita, L., & Di Luca, A. (2015). Using large-scale diagnostic quantities to investigate change in East Coast Lows. Climate Dynamics, 45(9–10), 2443–2453. https://doi.org/10.1007/s00382-015-2481-9
    Consulter sur link.springer.com
  • Li, W., Peng, C., Zhou, X., Sun, J., Zhu, Q., Wu, H., & St-Onge, B. (2015). Application of the ecosystem model and Markov Chain Monte Carlo for parameter estimation and productivity prediction. Ecosphere, 6(12), 1–15. https://doi.org/10.1890/ES15-00034.1

    It is increasingly being recognized that global ecological research requires novel methods and strategies in which to combine process‐based ecological models and data in cohesive, systematic ways. In process‐based model applications, inherent spatial and temporal heterogeneities found within terrestrial ecosystems may lead to the uncertainties of model predictions. To reduce simulation uncertainties due to inaccurate model parameters, the Markov Chain Monte Carlo (MCMC) method was applied in this study to improve the estimations of four key parameters used in the process‐based ecosystem model of TRIPLEX‐FLUX. These four key parameters include a maximum photosynthetic carboxylation rate of 25°C (Vmax), an electron transport (Jmax) light‐saturated rate within the photosynthetic carbon reduction cycle of leaves, a coefficient of stomatal conductance (m), and a reference respiration rate of 10°C (R10). Seven forest flux tower sites located across North America were used to investigate and facilitate understanding of the daily variation in model parameters for three deciduous forests, three evergreen temperate forests, and one evergreen boreal forest. Eddy covariance CO 2 exchange measurements were assimilated to optimize the parameters in the year 2006. After parameter optimization and adjustment took place, net ecosystem production prediction significantly improved (by approximately 25%) compared to the CO 2 flux measurements taken at the seven forest ecosystem sites. Results suggest that greater seasonal variability occurs in broadleaf forests in respect to the selected parameters than in needleleaf forests. This study also demonstrated that the model‐data fusion approach by incorporating MCMC method is able to better estimate parameters and improve simulation accuracy for different ecosystems located across North America.

    Consulter sur esajournals.onlinelibrary.wiley.com
  • Liu, J., Chen, H., Zhu, Q., Shen, Y., Wang, X., Wang, M., & Peng, C. (2015). A novel pathway of direct methane production and emission by eukaryotes including plants, animals and fungi: An overview. Atmospheric Environment, 115, 26–35. https://doi.org/10.1016/j.atmosenv.2015.05.019
    Consulter sur linkinghub.elsevier.com
  • St-Pierre, M., & Thériault, J. M. (2015). Clarification of the Water Saturation Represented on Ice Crystal Growth Diagrams. Journal of the Atmospheric Sciences, 72(7), 2608–2611. https://doi.org/10.1175/JAS-D-14-0357.1

    It has been known for a long time that the shape of ice crystals depends on both the air temperature and the relative humidity of the environment. The relationships among these factors have been summarized in classification diagrams and are intensively referred to in the cloud physics literature. To put in perspective the atmospheric conditions in which the different ice crystal habits grow with respect to the level of saturation in the atmosphere, the vapor density excess and supersaturation with respect to ice at liquid water saturation have been included on those diagrams as a function of air temperature. Over the years, the definition of the water saturation included in those types of diagrams has been misdefined. The goal of this study is to show that an error has been introduced in the definition of the excess of water vapor with respect to ice.

    Consulter sur journals.ametsoc.org
  • Thériault, J. M., Milbrandt, J. A., Doyle, J., Minder, J. R., Thompson, G., Sarkadi, N., & Geresdi, I. (2015). Impact of melting snow on the valley flow field and precipitation phase transition. Atmospheric Research, 156, 111–124. https://doi.org/10.1016/j.atmosres.2014.12.006
    Consulter sur linkinghub.elsevier.com
  • Thériault, J. M., Rasmussen, R., Petro, E., Trépanier, J.-Y., Colli, M., & Lanza, L. G. (2015). Impact of Wind Direction, Wind Speed, and Particle Characteristics on the Collection Efficiency of the Double Fence Intercomparison Reference. Journal of Applied Meteorology and Climatology, 54(9), 1918–1930. https://doi.org/10.1175/JAMC-D-15-0034.1

    Abstract The accurate measurement of snowfall is important in various fields of study such as climate variability, transportation, and water resources. A major concern is that snowfall measurements are difficult and can result in significant errors. For example, collection efficiency of most gauge–shield configurations generally decreases with increasing wind speed. In addition, much scatter is observed for a given wind speed, which is thought to be caused by the type of snowflake. Furthermore, the collection efficiency depends strongly on the reference used to correct the data, which is often the Double Fence Intercomparison Reference (DFIR) recommended by the World Meteorological Organization. The goal of this study is to assess the impact of weather conditions on the collection efficiency of the DFIR. Note that the DFIR is defined as a manual gauge placed in a double fence. In this study, however, only the double fence is being investigated while still being called DFIR. To address this issue, a detailed analysis of the flow field in the vicinity of the DFIR is conducted using computational fluid dynamics. Particle trajectories are obtained to compute the collection efficiency associated with different precipitation types for varying wind speed. The results show that the precipitation reaching the center of the DFIR can exceed 100% of the actual precipitation, and it depends on the snowflake type, wind speed, and direction. Overall, this study contributes to a better understanding of the sources of uncertainty associated with the use of the DFIR as a reference gauge to measure snowfall.

    Consulter sur journals.ametsoc.org
  • Wang, M., Chen, H., Yu, Z., Wu, J., Zhu, Q., Peng, C., Wang, Y., & Qin, B. (2015). Carbon accumulation and sequestration of lakes in China during the Holocene. Global Change Biology, 21(12), 4436–4448. https://doi.org/10.1111/gcb.13055

    Abstract Understanding the responses of lake systems to past climate change and human activity is critical for assessing and predicting the fate of lake carbon (C) in the future. In this study, we synthesized records of the sediment accumulation from 82 lakes and of C sequestration from 58 lakes with direct organic C measurements throughout China. We also identified the controlling factors of the long‐term sediment and C accumulation dynamics in these lakes during the past 12 ka (1 ka = 1000 cal yr BP ). Our results indicated an overall increasing trend of sediment and C accumulation since 12 ka, with an accumulation peak in the last couple of millennia for lakes in China, corresponding to terrestrial organic matter input due to land‐use change. The Holocene lake sediment accumulation rate ( SAR ) and C accumulation rate ( CAR ) averaged (mean ± SE ) 0.47 ± 0.05 mm yr −1 and 7.7 ± 1.4 g C m −2  yr −1 in China, respectively, comparable to the previous estimates for boreal and temperate regions. The SAR for lakes in the East Plain of subtropical China (1.05 ± 0.28 mm yr −1 ) was higher than those in other regions ( P  <   0.05). However, CAR did not vary significantly among regions. Overall, the variability and history of climate and anthropogenic interference regulated the temporal and spatial dynamics of sediment and C sequestration for lakes in China. We estimated the total amount of C burial in lakes of China as 8.0 ± 1.0 Pg C. This first estimation of total C storage and dynamics in lakes of China confirms the importance of lakes in land C budget in monsoon‐influenced regions.

    Consulter sur onlinelibrary.wiley.com
  • 1
  • ...
  • 11
  • 12
  • 13
  • 14
  • 15
  • ...
  • 22
  • Page 13 de 22
RIS

Format recommandé pour la plupart des logiciels de gestion de références bibliographiques

BibTeX

Format recommandé pour les logiciels spécialement conçus pour BibTeX

Flux web personnalisé
Dernière mise à jour depuis la base de données : 12/05/2025 05:00 (UTC)

Explorer

Auteur·e·s

  • Blanchet, Jean-Pierre (12)
  • Boudreault, Mathieu (14)
  • De Vernal, Anne (22)
  • Di Luca, Alejandro (25)
  • Gachon, Philippe (4)
  • Grenier, Patrick (11)
  • Lucas-Picher, Philippe (24)
  • Pausata, Francesco S.R. (38)
  • Peng, Changhui (235)
  • Thériault, Julie M. (36)

Type de ressource

  • Article de colloque (3)
  • Article de revue (411)
  • Chapitre de livre (3)
  • Livre (3)
  • Prépublication (3)

Année de publication

  • Entre 2000 et 2025
    • Entre 2010 et 2019
      • 2010 (10)
      • 2011 (39)
      • 2012 (28)
      • 2013 (38)
      • 2014 (41)
      • 2015 (41)
      • 2016 (56)
      • 2017 (48)
      • 2018 (48)
      • 2019 (74)

Explorer

UQAM - Université du Québec à Montréal

  • Centre pour l’étude et la simulation du climat à l’échelle régionale (ESCER)
  • bibliotheques@uqam.ca

Accessibilité Web