Votre recherche

The Sentinel Radiation MetData provided in situ measurements of radiation fluxes for the Winter Precip Type Research Multi-scale Experiment (WINTRE-MIX) are included in this dataset. Pyranometer and radiation data are provided in netCDF format. Data were collected from the following 4 sites: Gault, Arboretum, UQAM-PK and Trois-Rivières.

The Sentinel Non-Radiation MetData provided in situ measurements of meteorological variables (such as 2-meter temperature, relative humidity, wind speed and direction, and precipitation) collected for the the Winter Precip Type Research Multi-scale Experiment (WINTRE-MIX) are included in this dataset. Data are provided in netCDF format. Data were collected from the following 4 sites: Gault, Arboretum, UQAM-PK and Trois-Rivières.

This dataset includes hotplate precipitation gauge data from 4 different sites sitting in the St. Lawrence River Valley. The hotplate data were obtained by the K63 Hotplate Total Precipitation Gauge. The instruments belonged to Université du Québec à Montréal (UQAM) and McGill University. UQAM has one hotplate permanently installed on the rooftop of the President-Kennedy building, in downtown Montreal. Another hotplate was temporarily deployed by the UQAM team in the instrument yard of UQTR as part of the WINTRE-MIX field campaign. McGill’s instruments are permanently installed in the instrument yards of Gault and Arboretum.

This dataset includes snow depth and snow water equivalent data from 4 sites in the St. Lawrence River Valley collected for the WINTRE-MIX field project. The snow depth data were obtained by the SDMS40: Multipoint Scanning Snowfall Sensor and the SR50A Snow-Depth Sensor. The CS725 Snow-Water Equivalent Sensor measured the snow water equivalent data. This dataset includes measurements done at 4 different sites: UQAM-PK (UQAM), Trois-Rivières, Gault and Arboretum.

This dataset contains ice thickness data collected by ice detectors installed at various climate sentinels within the Saint Lawrence River Valley for the WINTRE-MIX field project. The names of four stations for which ice accretion data are available in ‘CFI_Climate_Sentinels_Icing_Detector_Data.nc’ are given in Table 1 of the readme documentation, along with their corresponding four-letter identifiers.

This dataset contains raw data collected from an OTT Parsivel laser disdrometer installed at a climate sentinel (Gault) in the Saint Lawrence River Valley The data is available from 1 Nov 2021 to 31 March 2022 (inclusive) to support the Winter Precipitation Type Research Multi-Scale Experiment (WINTRE-MIX). The instrument provides histograms of hydrometeor size and fallspeed. The Gault site is located behind Mont-Saint-Hilaire, about an hour’s drive east of Montreal. Other sites also collected Parsivel data during WINTRE-MIX.

This dataset contains raw data collected from an OTT Parsivel laser disdrometer installed at a climate sentinel (Arboretum) in the Saint Lawrence River Valley. The data is available from 1 Nov 2021 to 31 March 2022 (inclusive) to support the Winter Precipitation Type Research Multi-Scale Experiment (WINTRE-MIX). The instrument provides histograms of hydrometeor size and fallspeed. The Arboretum site is located on the southwestern tip of Montreal Island near the confluence of the Ottawa River and the St. Lawrence River. Several other sites also collected Parsivel data during WINTRE-MIX.

This dataset contains data from a METEK vertically profiling K-band Micro Rain Radar Pro (MRR-Pro) that was temporarily installed at the Université du Québec à Trois-Rivières (UQTR) campus during February and March 2022 to support the Winter Precipitation Type Research Multi-Scale Experiment (WINTRE-MIX). The instrument provides vertical profiles of reflectivity, Doppler velocity, and spectrum width. The site sits in the St. Lawrence River Valley. Several other sites also collected MRR data during WINTRE-MIX.

This dataset contains processed data from a METEK vertically profiling K-band Micro Rain Radar (MRR-2) permanently installed on the rooftop of UQAM President-Kennedy building in Montréal downtown, Québec. The instrument provides vertical profiles of reflectivity, Doppler velocity, and spectrum width. The site sits in the St. Lawrence River Valley. Several other sites also collected MRR data during WINTRE-MIX.

This dataset contains raw data from a METEK vertically profiling K-band Micro Rain Radar (MRR-2) permanently installed on the rooftop of UQAM President-Kennedy building in Montréal downtown, Québec. The instrument provides vertical profiles of reflectivity, Doppler velocity, and spectrum width. The site sits in the St. Lawrence River Valley. Several other sites also collected MRR data during WINTRE-MIX.

This dataset contains raw data from an OTT Parsivel laser disdrometer permanently installed on the rooftop of UQAM President-Kennedy building in Montréal downtown, Québec. The instrument provides histograms of hydrometeor size and fallspeed. The site sits in the St. Lawrence River Valley. Several other sites also collected Parsivel data during WINTRE-MIX 2022.

This dataset contains raw data from an OTT Parsivel laser disdrometer that was temporarily installed at the Université du Québec à Trois-Rivières (UQTR) campus from December 2021 to April 2022 to support the Winter Precipitation Type Research Multi-Scale Experiment (WINTRE-MIX). The instrument provides histograms of hydrometeor size and fallspeed. The site sits in the St. Lawrence River Valley. Several other sites also collected Parsivel data during WINTRE-MIX.

This dataset contains raw data from a METEK vertically profiling K-band Micro Rain Radar (MRR-2) installed at the climate sentinel in the Gault Nature Reserve (GAUL), about 30 km east of Montréal, Québec.The data were collected as part of the Winter Precipitation Type Research Multi-scale Experiment (WINTRE-MIX) field project held in February and March of 2022. The instrument provides vertical profiles of reflectivity, Doppler velocity, and spectrum width. The site is located at the southern flank of Mont-Saint-Hilaire, a mountain with an elevation of about 400 m (above mean sea-level). Several other sites also collected MRR data during WINTRE-MIX.

This dataset contains post-processed data from a METEK vertically profiling K-band Micro Rain Radar (MRR-2) installed at the climate sentinel in the Gault Nature Reserve (GAUL), about 30 km east of Montréal, Québec. The data were collected as part of the Winter Precipitation Type Research Multi-scale Experiment (WINTRE-MIX) field project held in February and March of 2022. The instrument provides vertical profiles of reflectivity, Doppler velocity, and spectrum width. The site is located at the southern flank of Mont-Saint-Hilaire, a mountain with an elevation of about 400 m (above mean sea-level). Several other sites also collected MRR data during WINTRE-MIX.

This dataset contains raw data from a METEK vertically profiling K-band Micro Rain Radar (MRR-2) installed at the climate sentinel in the Arboretum forest reserve (ARBO), about 30 km west of Montréal downtown, Québec, Canada. The data were collected as part of the Winter Precipitation Type Research Multi-scale Experiment (WINTRE-MIX) field project held in February and March of 2022. The instrument used to collect the data in this dataset provides vertical profiles of reflectivity, Doppler velocity, and spectrum width. The site is located near the confluence of the Ottawa River and the St. Lawrence River. Several other sites also collected MRR data during WINTRE-MIX.

Manual hydrometeor macro photographs were collected during the Winter Precipitation Type Research Multi-Scale Experiment (WINTRE-MIX) between 01 Feb – 15 March 2022. The macro photographs were collected by manual ground observation teams from the University at Albany (UAlbany), University of Colorado Boulder (CU), Université du Québec à Montréal (UQAM), and McGill University (McGill). Sections in the readme provide information on the camera setup, protocol, and dataset file formats, as well as limitations associated with the data.

Winter storms produce major problems for society, and the key responsible factor is often the varying types of precipitation. The objective of this study is to better understand the formation of different types of winter precipitation (freezing rain, ice pellets, snow, slush, wet snow and refrozen wet snow) within the varying and interacting environmental conditions in many winter storms. To address this issue, a one‐dimensional cloud model utilizing a double‐moment bulk microphysics scheme has been developed. Temperature and moisture profiles favorable for the formation of different winter precipitation types were varied in a systematic manner in an environment where snow is falling continuously through a temperature inversion. The ensuing precipitation evolved as a result of the variations in atmospheric temperature and moisture arising from phase changes such as melting and freezing. This study underlines the often complex manner through which different precipitation types form. It also demonstrates that the formation of semimelted particles can have a profound effect on the evolution of precipitation types aloft and at the surface. Furthermore, some types of precipitation only form within a narrow range of environmental conditions.

Abstract. The various precipitation types formed within winter storms (such as snow, wet snow and freezing rain) often lead to very hazardous weather conditions. These types of precipitation often occur during the passage of a warm front as a warm air mass ascends over a cold air mass. To address this issue further, we used a one-dimensional kinematic cloud model to simulate this gentle ascent (≤10 cm/s) of warm air. The initial temperature profile has an above 0°C inversion, a lower subfreezing layer, and precipitation falls from above the temperature inversion. The cloud model is coupled to a double-moment microphysics scheme that simulates the production of various types of winter precipitation. The results are compared with those from a previous study carried out in still air. Based on the temporal evolution of surface precipitation, snow reaches the surface significantly faster than in still air whereas other precipitation types including freezing rain and ice pellets have a shorter duration. Overall, even weak background vertical ascent has an important impact on the precipitation reaching the surface, the time of the elimination of the melting layer, and also the evolution of the lower subfreezing layer.

Abstract The phase of precipitation formed within the atmosphere is highly dependent on the vertical temperature profile through which it falls. In particular, several precipitation types can form in an environment with a melting layer aloft and a refreezing layer below. These precipitation types include freezing rain, ice pellets, wet snow, and slush. To examine the formation of such precipitation, a bulk microphysics scheme was used to compare the characteristics of the hydrometeors produced by the model and observed by a research aircraft flight during the 1998 ice storm near Montreal, Canada. The model reproduced several of the observed key precipitation characteristics. Sensitivity tests on the precipitation types formed during the ice storm were also performed. These tests utilized temperature profiles produced by the North American Regional Reanalysis. The results show that small variations (±0.5°C) in the temperature profiles as well as in the precipitation rate can have major impacts on the types of precipitation formed at the surface. These results impose strong requirements on the accuracy needed by prediction models.