Votre recherche

Abstract This paper investigates the potential of reanalyses as proxies of observed surface precipitation and temperature to force hydrological models. Three global atmospheric reanalyses (ERA-Interim, CFSR, and MERRA), one regional reanalysis (NARR), and one global meteorological forcing dataset obtained by bias-correcting ERA-Interim [Water and Global Change (WATCH) Forcing Data ERA-Interim (WFDEI)] were compared to one gridded observation database over the contiguous United States. Results showed that all temperature datasets were similar to the gridded observation over most of the United States. On the other hand, precipitation from all three global reanalyses was biased, especially in summer and winter in the southeastern United States. The regional reanalysis precipitation was closer to observations since it indirectly assimilates surface precipitation. The WFDEI dataset was generally less biased than the reanalysis datasets. All datasets were then used to force a global conceptual hydrological model on 370 watersheds of the Model Parameter Estimation Experiment (MOPEX) database. River flows were computed for each watershed, and results showed that the flows simulated using NARR and gridded observations forcings were very similar to the observed flows. The simulated flows forced by the global reanalysis datasets were also similar to the observations, except in the humid continental and subtropical climatic regions, where precipitation seasonality biases degraded river flow simulations. The WFDEI dataset led to better river flows than reanalysis in the humid continental and subtropical climatic regions but was no better than reanalysis—and sometimes worse—in other climatic zones. Overall, the results indicate that global reanalyses have good potential to be used as proxies to observations to force hydrological models, especially in regions with few weather stations.

Abstract During spring 2011, an extreme flood occurred along the Richelieu River located in southern Quebec, Canada. The Richelieu River is the last section of the complex Richelieu basin, which is composed of the large Lake Champlain located in a valley between two large mountains. Previous attempts in reproducing the Richelieu River flow relied on the use of simplified lumped models and showed mixed results. In order to prepare a tool to assess accurately the change of flood recurrences in the future, a state‐of‐the‐art distributed hydrological model was applied over the Richelieu basin. The model setup comprises several novel methods and data sets such as a very high resolution river network, a modern calibration technique considering the net basin supply of Lake Champlain, a new optimization algorithm, and the use of an up‐to‐date meteorological data set to force the model. The results show that the hydrological model is able to satisfactorily reproduce the multiyear mean annual hydrograph and the 2011 flow time series when compared with the observed river flow and an estimation of the Lake Champlain net basin supply. Many factors, such as the quality of the meteorological forcing data, that are affected by the low density of the station network, the steep terrain, and the lake storage effect challenged the simulation of the river flow. Overall, the satisfactory validation of the hydrological model allows to move to the next step, which consists in assessing the impacts of climate change on the recurrence of Richelieu River floods. , Plain Language Summary In order to study the 2011 Richelieu flood and prepare a tool capable of estimating the effects of climate change on the recurrence of floods, a hydrological model is applied over the Richelieu basin. The application of a distributed hydrological model is useful to simulate the flow of all the tributaries of the Richelieu basin. This new model setup stands out from past models due to its distribution in several hydrological units, its high‐resolution river network, the calibration technique, and the high‐resolution weather forcing data set used to drive the model. The model successfully reproduced the 2011 Richelieu River flood and the annual hydrograph. The simulation of the Richelieu flow was challenging due to the contrasted elevation of the Richelieu basin and the presence of the large Lake Champlain that acts as a reservoir and attenuates short‐term fluctuations. Overall, the application was deemed satisfactory, and the tool is ready to assess the impacts of climate change on the recurrence of Richelieu River floods. , Key Points An advanced high‐resolution distributed hydrological model is applied over a U.S.‐Canada transboundary basin The simulated net basin supply of Lake Champlain and the Richelieu River discharge are in good agreement with observations of the 2011 flood The flow simulation is challenging due to the topographic and meteorological complexities of the basin and uncertainties in the observations

Abstract Meteorological processes over islands with complex orography could be better simulated by Convection Permitting Regional Climate Models (CP-RCMs) thanks to an improved representation of the orography, land–sea contrasts, the combination of coastal and orographic effects, and explicit deep convection. This paper evaluates the ability of the CP-RCM CNRM-AROME (2.5-km horizontal resolution) to simulate relevant meteorological characteristics of the Mediterranean island of Corsica for the 2000–2018 period. These hindcast simulations are compared to their driving Regional Climate Model (RCM) CNRM-ALADIN (12.5-km horizontal resolution and parameterised convection), weather stations for precipitation and wind and gridded precipitation datasets. The main benefits are found in the representation of (i) precipitation extremes resulting mainly from mesoscale convective systems affected by steep mountains during autumn and (ii) the formation of convection through thermally induced diurnal circulations and their interaction with the orography during summer. Simulations of hourly precipitation extremes, the diurnal cycle of precipitation, the distribution of precipitation intensities, the duration of precipitation events, and sea breezes are all improved in the 2.5-km simulations with respect to the RCM, confirming an added value. However, existing differences between model simulations and observations are difficult to explain as the main biases are related to the availability and quality of observations, particularly at high elevations. Overall, better results from the 2.5-km resolution, increase our confidence in CP-RCMs to investigate future climate projections for Corsica and islands with complex terrain.

Abstract. Floods are the primary natural hazard in the French Mediterranean area, causing damages and fatalities every year. These floods are triggered by heavy precipitation events (HPEs) characterized by limited temporal and spatial extents. A new generation of regional climate models at the kilometer scale have been developed, allowing an explicit representation of deep convection and improved simulations of local-scale phenomena such as HPEs. Convection-permitting regional climate models (CPMs) have been scarcely used in hydrological impact studies, and future projections of Mediterranean floods remain uncertain with regional climate models (RCMs). In this paper, we use the CNRM-AROME CPM (2.5 km) and its driving CNRM-ALADIN RCM (12 km) at the hourly timescale to simulate floods over the Gardon d'Anduze catchment located in the French Mediterranean region. Climate simulations are bias-corrected with the CDF-t method. Two hydrological models, a lumped and conceptual model (GR5H) and a process-based distributed model (CREST), forced with historical and future climate simulations from the CPM and from the RCM, have been used. The CPM model confirms its ability to better reproduce extreme hourly rainfall compared to the RCM. This added value is propagated on flood simulation with a better reproduction of flood peaks. Future projections are consistent between the hydrological models but differ between the two climate models. Using the CNRM-ALADIN RCM, the magnitude of all floods is projected to increase. With the CNRM-AROME CPM, a threshold effect is found: the magnitude of the largest floods is expected to intensify, while the magnitude of the less severe floods is expected to decrease. In addition, different flood event characteristics indicate that floods are expected to become flashier in a warmer climate, with shorter lag time between rainfall and runoff peak and a smaller contribution of base flow, regardless of the model. This study is a first step for impact studies driven by CPMs over the Mediterranean.

Abstract In spring 2011, an unprecedented flood hit the complex eastern United States (U.S.)–Canada transboundary Lake Champlain–Richelieu River (LCRR) Basin, destructing properties and inducing negative impacts on agriculture and fish habitats. The damages, covered by the Governments of Canada and the U.S., were estimated to C$90M. This natural disaster motivated the study of mitigation measures to prevent such disasters from reoccurring. When evaluating flood risks, long‐term evolving climate change should be taken into account to adopt mitigation measures that will remain relevant in the future. To assess the impacts of climate change on flood risks of the LCRR basin, three bias‐corrected multi‐resolution ensembles of climate projections for two greenhouse gas concentration scenarios were used to force a state‐of‐the‐art, high‐resolution, distributed hydrological model. The analysis of the hydrological simulations indicates that the 20‐year return period flood (corresponding to a medium flood) should decrease between 8% and 35% for the end of the 21st Century (2070–2099) time horizon and for the high‐emission scenario representative concentration pathway (RCP) 8.5. The reduction in flood risks is explained by a decrease in snow accumulation and an increase in evapotranspiration expected with the future warming of the region. Nevertheless, due to the large climate inter‐annual variability, short‐term flood probabilities should remain similar to those experienced in the recent past.

Abstract A method to assess firn compaction using data collected with the Airborne SAR (Synthetic Aperture Radar)/Interferometric Radar Altimeter System (ASIRAS) is developed. For this, we develop a dynamical firn-compaction model that includes meltwater retention. Based on the ASIRAS data, which show internal layers as annual horizons in the uppermost firn, the method relies on inferring the age/ depth (internal layers) information from the radar data using a Monte Carlo inversion technique to tune in parallel both the firn model and the atmospheric forcing parameters (temperature and accumulation). The model is validated against two firn cores, and it is shown that applying both firn densities and age/ depth information for the inversion gives the most accurate understanding of model biases. The method is then applied to a 67 km section of the EGIG line forced by atmospheric output from a regional climate model using only age/depth information in the inversion step. The layers traced by the ASIRAS data are modeled with a root-mean-square error of 9 cm, which is within the estimated error of the layer tracing. This gives us confidence in applying observed annual layering from firn radar data to assess firn compaction; however, the study also indicates that our firn-model-tuning parameters are site-dependent and cannot be parameterized by temperature and accumulation alone.

This study presents two simulations of the climate over Greenland with the regional climate model (RCM) HIRHAM5 at 0.05° and 0.25° resolution driven at the lateral boundaries by the ERA‐Interim reanalysis for the period 1989–2009. These simulations are validated against observations from meteorological stations (Danish Meteorological Institute) at the coast and automatic weather stations on the ice sheet (Greenland Climate Network). Generally, the temperature and precipitation biases are small, indicating a realistic simulation of the climate over Greenland that is suitable to drive ice sheet models. However, the bias between the simulations and the few available observations does not reduce with higher resolution. This is partly explained by the lack of observations in regions where the higher resolution is expected to improve the simulated climate. The RCM simulations show that the temperature has increased the most in the northern part of Greenland and at lower elevations over the period 1989–2009. Higher resolution increases the relief variability in the model topography and causes the simulated precipitation to be larger on the coast and smaller over the main ice sheet compared to the lower‐resolution simulation. The higher‐resolution simulation likely represents the Greenlandic climate better, but the lack of observations makes it difficult to validate fully. The detailed temperature and precipitation fields that are generated with the higher resolution are recommended for producing adequate forcing fields for ice sheet models, particularly for their improved simulation of the processes occurring at the steep margins of the ice sheet. , Key Points Validation of regional climate model simulations over Greenland Description of the climate over Greenland Assessment of added value

Abstract Approximately 10 years ago, convection‐permitting regional climate models (CPRCMs) emerged as a promising computationally affordable tool to produce fine resolution (1–4 km) decadal‐long climate simulations with explicitly resolved deep convection. This explicit representation is expected to reduce climate projection uncertainty related to deep convection parameterizations found in most climate models. A recent surge in CPRCM decadal simulations over larger domains, sometimes covering continents, has led to important insights into CPRCM advantages and limitations. Furthermore, new observational gridded datasets with fine spatial and temporal (~1 km; ~1 h) resolutions have leveraged additional knowledge through evaluations of the added value of CPRCMs. With an improved coordination in the frame of ongoing international initiatives, the production of ensembles of CPRCM simulations is expected to provide more robust climate projections and a better identification of their associated uncertainties. This review paper presents an overview of the methodology to produce CPRCM simulations and the latest research on the related added value in current and future climates. Impact studies that are already taking advantage of these new CPRCM simulations are highlighted. This review paper ends by proposing next steps that could be accomplished to continue exploiting the full potential of CPRCMs. This article is categorized under: Climate Models and Modeling > Earth System Models

We compare ensemble mean daily precipitation and near‐surface temperatures from regional climate model simulations over seven Coordinated Regional Climate Downscaling Experiment domains for the winter and summer seasons. We use Taylor diagrams to show the domain‐wide pattern similarity between the model ensemble and the observational data sets. We use the Climatic Research Unit (CRU) and the University of Delaware gridded observations and ERA‐Interim reanalysis data as an additional observationally based estimate of historical climatology. Taylor diagrams determine the relative skill of the seven sets of simulations and quantify these results in terms of center pattern root‐mean square error and correlation coefficient. Results suggest that there is good agreement between the models and the CRU, in terms of their respective seasonal cycles, as shown in Taylor diagrams and bias plots. There is also good agreement between both gridded observation sets. In addition, downscaled ERA‐Interim precipitation is closer to observations than raw ERA‐Interim precipitation. Domains located in the low latitudes and those having high topography appear to have larger biases, especially precipitation.

Abstract The ability of four regional climate models (RCMs) to represent the Indian monsoon was verified in a consistent framework for the period 1981–2000 using the 45-yr European Centre for Medium-Range Weather Forecasts (ECMWF) Re-Analysis (ERA-40) as lateral boundary forcing data. During the monsoon period, the RCMs are able to capture the spatial distribution of precipitation with a maximum over the central and west coast of India, but with important biases at the regional scale on the east coast of India in Bangladesh and Myanmar. Most models are too warm in the north of India compared to the observations. This has an impact on the simulated mean sea level pressure from the RCMs, being in general too low compared to ERA-40. Those biases perturb the land–sea temperature and pressure contrasts that drive the monsoon dynamics and, as a consequence, lead to an overestimation of wind speed, especially over the sea. The timing of the monsoon onset of the RCMs is in good agreement with the one obtained from observationally based gridded datasets, while the monsoon withdrawal is less well simulated. A Hovmöller diagram representation of the mean annual cycle of precipitation reveals that the meridional motion of the precipitation simulated by the RCMs is comparable to the one observed, but the precipitation amounts and the regional distribution differ substantially between the four RCMs. In summary, the spread at the regional scale between the RCMs indicates that important feedbacks and processes are poorly, or not, taken into account in the state-of-the-art regional climate models.

Abstract Since a decade, convection-permitting regional climate models (CPRCM) have emerged showing promising results, especially in improving the simulation of precipitation extremes. In this article, the CPRCM CNRM-AROME developed at the Centre National de Recherches Météorologiques (CNRM) since a few years is described and evaluated using a 2.5-km 19-year long hindcast simulation over a large northwestern European domain using different observations through an added-value analysis in which a comparison with its driving 12-km RCM CNRM-ALADIN is performed. The evaluation is challenging due to the lack of high-quality observations at both high temporal and spatial resolutions. Thus, a high spatio-temporal observed gridded precipitation dataset was built from the collection of seven national datasets that helped the identification of added value in CNRM-AROME. The evaluation is based on a series of standard climatic features that include long-term means and mean annual cycles of precipitation and near-surface temperature where CNRM-AROME shows little improvements compared to CNRM-ALADIN. Additional indicators such as the summer diurnal cycle and indices of extreme precipitation show, on the contrary, a more realistic behaviour of the CNRM-AROME model. Moreover, the analysis of snow cover shows a clear added-value in the CNRM-AROME simulation, principally due to the improved description of the orography with the CPRCM high resolution. Additional analyses include the evaluation of incoming shortwave radiation, and cloud cover using satellite estimates. Overall, despite some systematic biases, the evaluation indicates that CNRM-AROME is a suitable CPRCM that is superior in many aspects to the RCM CNRM-ALADIN.

Abstract. Various methods are available for assessing uncertainties in climate impact studies. Among such methods, model weighting by expert elicitation is a practical way to provide a weighted ensemble of models for specific real-world impacts. The aim is to decrease the influence of improbable models in the results and easing the decision-making process. In this study both climate and hydrological models are analysed, and the result of a research experiment is presented using model weighting with the participation of six climate model experts and six hydrological model experts. For the experiment, seven climate models are a priori selected from a larger EURO-CORDEX (Coordinated Regional Downscaling Experiment – European Domain) ensemble of climate models, and three different hydrological models are chosen for each of the three European river basins. The model weighting is based on qualitative evaluation by the experts for each of the selected models based on a training material that describes the overall model structure and literature about climate models and the performance of hydrological models for the present period. The expert elicitation process follows a three-stage approach, with two individual rounds of elicitation of probabilities and a final group consensus, where the experts are separated into two different community groups: a climate and a hydrological modeller group. The dialogue reveals that under the conditions of the study, most climate modellers prefer the equal weighting of ensemble members, whereas hydrological-impact modellers in general are more open for assigning weights to different models in a multi-model ensemble, based on model performance and model structure. Climate experts are more open to exclude models, if obviously flawed, than to put weights on selected models in a relatively small ensemble. The study shows that expert elicitation can be an efficient way to assign weights to different hydrological models and thereby reduce the uncertainty in climate impact. However, for the climate model ensemble, comprising seven models, the elicitation in the format of this study could only re-establish a uniform weight between climate models.