Votre recherche

Abstract Univariate quantile mapping (QM), a technique often used to statistically postprocess climate simulations, may generate physical inconsistency. This issue is investigated here by classifying physical inconsistency into two types. Type I refers to the attribution of an impossible value to a single variable, and type II refers to the breaking of a fixed intervariable relationship. Here QM is applied to relative humidity (RH) and its parent variables, namely, temperature, pressure, and specific humidity. Twelve sites representing various climate types across North America are investigated. Time series from an ensemble of ten 3-hourly simulations are postprocessed, with the CFSR reanalysis used as the reference product. For type I, results indicate that direct postprocessing of RH generates supersaturation values (>100%) at relatively small frequencies of occurrence. Generated supersaturation amplitudes exceed observed values in fog and clouds. Supersaturation values are generally more frequent and higher when RH is deduced from postprocessed parent variables. For type II, results show that univariate QM practically always breaks the intervariable thermodynamic relationship. Heuristic proxies are designed for comparing the initial bias with physical inconsistency of type II, and results suggest that QM generates a problem that is arguably lesser than the one it is intended to solve. When physical inconsistency is avoided by capping one humidity variable at its saturation level and deducing the other, statistical equivalence with the reference product remains much improved relative to the initial situation. A recommendation for climate services is to postprocess RH and deduce specific humidity rather than the opposite.

Abstract Bias adjustment of numerical climate model simulations involves several arguments wherein the notion of physical inconsistency is referred to, either for rejecting the legitimacy of bias adjustment in general or for justifying the necessity of sophisticated multivariate techniques. However, this notion is often mishandled, in part because the literature generally proceeds without defining it. In this context, the central objective of this study is to clarify and illustrate the distinction between physical inconsistency and multivariate bias, by investigating the effect of bias adjustment on two different kinds of intervariable relationships, namely a physical constraint expected to hold at every step of a time series and statistical properties that emerge with potential bias over a climatic timescale. To this end, 18 alternative bias adjustment techniques are applied on 10 climate simulations at 12 sites over North America. Adjusted variables are temperature, pressure, relative humidity and specific humidity, linked by a thermodynamic constraint. The analysis suggests on the one hand that a clear instance of potential physical inconsistency can be avoided with either a univariate or a multivariate technique, if and only if the bias adjustment strategy explicitly considers the physical constraint to be preserved. On the other hand, it also suggests that sophisticated multivariate techniques alone are not complete adjustment strategies in presence of a physical constraint, as they cannot replace its explicit consideration. By involving common bias adjustment procedures with likely effects on diverse basic statistical properties, this study may also help guide climate information users in the determination of adequate bias adjustment strategies for their research purposes.

The hypothesis according to which higher sulphate concentrations favor ice clouds made of larger ice crystals is tested using data sets from the CloudSat and Cloud‐Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellites. This is a potential consequence of the sulphate‐induced freezing inhibition (SIFI) effect, namely, the hypothesis that sulphates contribute to inhibit the onset of ice crystal formation by deactivating ice‐forming nuclei during Arctic winter. A simple index based on the backscattering at 532 nm and the color ratio from the CALIPSO lidar measurements is compared against in situ sulphate concentration time series and used as a proxy for this variable. An algorithm using the lidar data and the CloudSat radar microphysical retrievals is also developed for identifying cloud types, focusing on those supposedly favored by the SIFI effect. The analysis includes the effect of the lidar off‐nadir angle on the sulphate index and the cloud classification, the validation of the index, as well as the production of circum‐Arctic maps of the sulphate index and of the SIFI‐favored clouds fraction. The increase of the lidar off‐nadir angle is shown to cause an increase in the measured depolarization ratio and hence in the ability to detect ice crystals. The index correlates positively with both sulphates and sea salt concentrations, with a Pearson correlation coefficient ( ) varying from 0.10 to 0.42 for the different comparisons performed. Ultimate findings are the results of two correlation tests of the SIFI effect, which allow for a new outlook on its possible role in the Arctic troposphere during winter.

Abstract Quantile mapping (QM) is a technique often used for statistical post‐processing (SPP) of climate model simulations, in order to adjust their biases relative to a selected reference product and/or to downscale their resolution. However, when QM is applied in univariate mode, there is a risk of generating other problems, like intervariable physical inconsistency (PI). Here, such a risk is investigated with daily temperature minimum ( T min ) and maximum ( T max ), for which the relationship T min > T max would be inconsistent with the definition of the variables. QM is applied to an ensemble of 78 daily CMIP5 simulations over Hudson Bay for the application period 1979–2100, with Climate Forecast System Reanalysis (CFSR) selected as the reference product during the calibration period 1979–2010. This study's specific objectives are as follows: to investigate the conditions under which PI situations are generated; to test whether PI may be prevented simply by tuning some of the QM technique's numerical choices; and to compare the suitability of alternative approaches that hinder PI by design. Primary results suggest that PI situations appear preferentially for small values of the initial (simulated) diurnal temperature range (DTR), but the differential between the respective biases of T min and T max also plays an important role; one cannot completely prevent the generation of PI simply by adjusting QM parameters and options, but forcing preservation of the simulated long‐term trends generates fewer PI situations; for avoiding PI between T min and T max , the present study supports a previous recommendation to directly post‐process T max and DTR before deducing T min .

Abstract The interdependence between climatic variables should be taken into account when developing climate scenarios. For example, temperature‐precipitation interdependence in the Arctic is strong and impacts on other physical characteristics, such as the extent and duration of snow cover. However, this interdependence is often misrepresented in climate simulations. Here we use two two‐dimensional (2‐D) methods for statistically adjusting climate model simulations to develop plausible local daily temperature ( T mean ) and precipitation ( Pr ) scenarios. The first 2‐D method is based on empirical quantile mapping (2Dqm) and the second on parametric copula models (2Dcopula). Both methods are improved here by forcing the preservation of the modeled long‐term warming trend and by using moving windows to obtain an adjustment specific to each day of the year. These methods were applied to a representative ensemble of 13 global climate model simulations at 26 Canadian Arctic coastal sites and tested using an innovative cross‐validation approach. Intervariable dependence was evaluated using correlation coefficients and empirical copula density plots. Results show that these 2‐D methods, especially 2Dqm, adjust individual distributions of climatic time series as adequately as one common one‐dimensional method (1Dqm) does. Furthermore, although 2Dqm outperforms the other methods in reproducing the observed temperature‐precipitation interdependence over the calibration period, both 2Dqm and 2Dcopula perform similarly over the validation periods. For cases where temperature‐precipitation interdependence is important (e.g., characterizing extreme events and the extent and duration of snow cover), both 2‐D methods are good options for producing plausible local climate scenarios in Canadian Arctic coastal zones. , Key Points We improved two methods for adjusting T mean , Pr , and their dependence in scenarios Methods are tested at Arctic coastal sites where T mean ‐ Pr dependence is crucial Both methods improve the plausibility of the local climate scenarios

Abstract The path toward a warmer global climate is not smooth, but, rather, is made up of a succession of positive and negative temperature trends, with cooling having more chance to occur the shorter the time scale considered. In this paper, estimates of the probabilities of short-term cooling ( P cool ) during the period 2006–35 are performed for 5146 locations across Canada. Probabilities of cooling over durations from 5 to 25 yr come from an ensemble of 60 climate scenarios, based on three different methods using a gridded observational product and CMIP5 climate simulations. These methods treat interannual variability differently, and an analysis in hindcast mode suggests they are relatively reliable. Unsurprisingly, longer durations imply smaller P cool values; in the case of annual temperatures, the interdecile range of P cool values across Canada is, for example, ~2%–18% for 25 yr and ~40%–46% for 5 yr. Results vary slightly with the scenario design method, with similar geographical patterns emerging. With regards to seasonal influence, spring and winter are generally associated with higher P cool values. Geographical P cool patterns and their seasonality are explained in terms of the interannual variability over background trend ratio. This study emphasizes the importance of natural variability superimposed on anthropogenically forced long-term trends and the fact that regional and local short-term cooling trends are to be expected with nonnegligible probabilities.

Data sets from CloudSat radar reflectivity and CALIPSO lidar backscattering measurements provide a new regard on Arctic and Antarctic winter cloud systems, as well as on the way aerosols determine their formation and evolution. Especially, links between the cloud ice crystal size and the surrounding aerosol field may be further investigated. In this study, the satellite observations are used to heuristically separate polar thin ice clouds into two crystal size categories, and an aerosol index based on the attenuated backscattering and color ratio of the sampled volumes is used for identifying haze in cloud‐free regions. Statistics from 386 Arctic satellite overpasses during January 2007 and from 379 overpasses over Antarctica during July 2007 reveal that sectors with the highest proportion of thin ice clouds having large ice crystals at their top are those for which the aerosol index is highest. Moreover, a weak but significant correlation between the cloud top ice effective radius and the above‐cloud aerosol index suggests that more polluted clouds tend to have higher ice effective radius, in 10 of the 11 sectors investigated. These results are interpreted in terms of a sulphate‐induced freezing inhibition effect.

Abstract Spatial analog techniques consist in identifying locations whose historical climate is similar to the anticipated future climate at a reference location. In the process of identifying analogs, one key step is the quantification of the dissimilarity between two climates separated in time and space, which involves the choice of a metric. In this study, six a priori suitable metrics are described (the standardized Euclidean distance, the Kolmogorov–Smirnov statistic, the nearest-neighbor distance, the Zech–Aslan energy statistic, the Friedman–Rafsky runs statistic, and the Kullback–Leibler divergence) and criteria are proposed and investigated in an attempt to identify the best metric for selecting spatial analogs. The case study involves the use of numerical simulations performed with the Canadian Regional Climate Model (CRCM, version 4.2.3), from which three annual indicators (total precipitation, heating degree-days, and cooling degree-days) are calculated over 30-yr periods (1971–2000 and 2041–70). It is found that the six metrics identify comparable analog regions at a relatively large scale but that best analogs may differ substantially. For best analogs, it is shown that the uncertainty stemming from the metric choice does not generally exceed that stemming from the simulation or model choice. On the basis of the set of criteria considered in this study, the Zech–Aslan energy statistic stands out as the most recommended metric for analog studies, whereas the Friedman–Rafsky runs statistic is the least recommended.

Abstract Climate change can cause negative impacts to the agricultural sector by increasing pest damage to crops. The European corn borer (ECB) is a major insect pest of corn in North America. Its speed of development could potentially accelerate under a warmer climate, leading to an earlier development of the first generation and an increase in the number of generations per year. The main objective of this study was to assess the potential impacts of climate change on ECB management for the future period 2041–2070 in Quebec, Canada, using bioclimatic modelling and climate analogues. First flight of ECB moths could occur about 15 days earlier in the season in 2041–2070 compared to the reference period 1970–1999. The window for insecticide interventions may be reduced under climate change by 15.6% to 27.8% for univoltine ECB and by 13.8% to 52.7% for bivoltine ECB. Climate change could promote the development of an additional generation in the southern region for both races, considering temperature increases and factors inducing the overwintering diapause. ECB management could become more costly both economically and environmentally under the future climate, and it should be revised according to the results of this study.

The science of complex systems is increasingly asked to forecast the consequences of climate change. As a result, scientists are now engaged in making predictions about an uncertain future, which entails the efficient communication of this uncertainty. Here we show the benefits of hierarchically decomposing the uncertainty in predicted changes in animal population size into its components due to structural uncertainty in climate scenarios (greenhouse gas emissions and global circulation models), structural uncertainty in the demographic model, climatic stochasticity, environmental stochasticity unexplained by climate–demographic trait relationships, and sampling variance in demographic parameter estimates. We quantify components of uncertainty surrounding the future abundance of a migratory bird, the greater snow goose ( Chen caeruslescens atlantica ), using a process-based demographic model covering their full annual cycle. Our model predicts a slow population increase but with a large prediction uncertainty. As expected from theoretical variance decomposition rules, the contribution of sampling variance to prediction uncertainty rapidly overcomes that of process variance and dominates. Among the sources of process variance, uncertainty in the climate scenarios contributed less than 3% of the total prediction variance over a 40-year period, much less than environmental stochasticity. Our study exemplifies opportunities to improve the forecasting of complex systems using long-term studies and the challenges inherent to predicting the future of stochastic systems.

Objectives: We propose a novel approach to examine vulnerability in the relationship between heat and years of life lost and apply to neighborhood social disparities in Montreal and Paris. Methods: We used historical data from the summers of 1990 through 2007 for Montreal and from 2004 through 2009 for Paris to estimate daily years of life lost social disparities (DYLLD), summarizing social inequalities across groups. We used Generalized Linear Models to separately estimate relative risks (RR) for DYLLD in association with daily mean temperatures in both cities. We used 30 climate scenarios of daily mean temperature to estimate future temperature distributions (2021–2050). We performed random effect meta-analyses to assess the impact of climate change by climate scenario for each city and compared the impact of climate change for the two cities using a meta-regression analysis. Results: We show that an increase in ambient temperature leads to an increase in social disparities in daily years of life lost. The impact of climate change on DYLLD attributable to temperature was of 2.06 (95% CI: 1.90, 2.25) in Montreal and 1.77 (95% CI: 1.61, 1.94) in Paris. The city explained a difference of 0.31 (95% CI: 0.14, 0.49) on the impact of climate change. Conclusion: We propose a new analytical approach for estimating vulnerability in the relationship between heat and health. Our results suggest that in Paris and Montreal, health disparities related to heat impacts exist today and will increase in the future.

Abstract Timothy ( Phleum pratense L.) is expected to be more affected by climate change than other forage grasses. Therefore, alternatives to timothy, such as tall fescue [ Schedonorus arundinaceus (Shreb.) Dumort.], meadow fescue [ S. pratensis (Huds.) P. Beauv.], or meadow bromegrass ( Bromus biebersteinii Roem. & Schult.) should be explored. Our objective was to simulate and compare the yield and nutritive value of four alfalfa ( Medicago sativa L.)–grass mixtures and annual crops grown on two virtual dairy farms representative of eastern Canada under future climate conditions. The Integrated Farm System Model (IFSM) was used for these projections under the reference (1971–2000), near future (2020–2049), and distant future (2050–2079) climates for two climatically contrasting agricultural areas in eastern Canada (eastern Quebec; southwestern Quebec). In both future periods, annual forage dry matter (DM) yields of the four alfalfa–grass mixtures are projected to increase because of additional harvests, with greater DM yield increases projected in the colder area than in the warmer area. In both areas, the highest yield increase is projected for alfalfa–tall fescue mixture and the lowest for alfalfa–timothy mixture. The nutritive value of all mixtures should increase due to a greater proportion of alfalfa. In both areas, yields of silage and grain corn ( Zea mays L.), and soybean [ Glycine max (L.) Merr.] are projected to increase, but not those of wheat ( Triticum aestivum L.) and barley ( Hordeum vulgare L.). Tall fescue, meadow bromegrass, and meadow fescue are adequate alternatives to timothy grown in association with alfalfa under future climate conditions. , Core Ideas Forage yields of alfalfa–grass mixtures are projected to increase due to additional harvests. Mixture with tall fescue is projected to increase the most and timothy the least. Tall fescue, meadow fescue, and meadow bromegrass are valuable alternatives to timothy. Nutritive value is projected to increase due to more alfalfa in the mixture. Corn and soybean grain yields are projected to increase but not those of wheat and barley.